Difference between revisions of "Category:Plugin Commands (MV)"

Revision as of 19:24, 1 April 2020

Welcome to the wiki! This is where you can find resources from Yanfly.moe, Ækashics.moe,
VisuStella, Caz Wolf, Fallen Angel Olivia, Atelier Irina, and other affiliated content creators.

1 Advanced Switches & Variables
2 Anti-Audio Delay
3 Action Sequence Fast Forward/Skip
4 Animated Pictures
5 Battle Engine Core
- 5.1 Battle System - ATB
- 5.2 Battle System - CTB
- 5.3 Battle System - OTB (Order Turn Battle)
- 5.4 Battle System - STB
- 5.5 In-Battle Status
- 5.6 Turn Order Display
6 Bright Effects
7 Button Common Events
8 Call Event
9 Class Change Core
- 9.1 Subclass
10 Common Event Menu
- 10.1 Common Event Menu Setup Pack 1
- 10.2 Common Event Menu Setup Pack 2
11 Core Engine
12 Credits Page
13 Damage Core
14 Dash Toggle
15 Dragonbones Event Pictures
16 Dragonbones Map Sprites
17 Enemy Levels
- 17.1 Difficulty Slider
18 Enhanced TP
19 Equip Battle Skills
20 Equip Core
- 20.1 Equip Customize Command
21 Event Chase Player
- 21.1 Event Chase Stealth
22 Event Mini Label
23 Event Timer Control
24 External Links
25 Footstep Sounds
26 Force Advantage
27 Gab Window
28 Help File Access
29 Horror Effects
30 Icon Balloons
31 Improved Battlebacks
32 Item Core
- 32.1 Attachable Augments
- 32.2 Item Disassemble
- 32.3 Item Durability
- 32.4 Item Upgrade Slots
33 Item Synthesis
34 Job Points
35 Map Gold Window
36 Map Select Equip
37 Map Select Skill
38 Map Status Window
39 Message Core
- 39.1 Extended Message Pack 1
- 39.2 Message Backlog
40 Music Menu
41 Notification Window
42 Patch Notes
43 Party System
- 43.1 Actor Party Switch
44 Picture Common Events
45 Picture Spritesheets
46 Proximity Compass
47 Quest Journal System
- 47.1 Map Quest Window
48 Repel & Lure Encounters
49 Row Formation
50 Save Core
- 50.1 Autosave
- 50.2 New Game+
51 Save Event Locations
52 Self Switches & Variables
53 Skill Core
- 53.1 Party Limit Gauge
54 Skill Learn System
55 Stat Allocation
56 Status Menu Core
- 56.1 Actor Variables
- 56.2 Profile Status Page
57 Stop Map Movement
58 Tool Ring System
59 Victory Aftermath
- 59.1 Aftermath Level Up
60 Victory Sequence UI
61 Weather In Battle

Plugin Commands are event commands that are used to call upon functions added by a plugin that aren't inherently a part of RPG Maker MV.

Here is a list of Plugin Command(s) that you may use:

Advanced Switches & Variables

These plugin commands can be used to immediately refresh a map or troop
troop event to ensure that switch/variable data gets noticed and triggered
or updated upon your call.

Plugin Command:

  RefreshMap
  - This will refresh all of the map's events. This will update any page
  conditions with Advanced Switches or Variables that may have changed
  values prior to using this plugin command. This can only be used outside
  of battle!

  RefreshTroop
  - This will refresh the current event interpreter in battle. This will
  update any page condition within the current troop that utilizes Advanced
  Switches or Variables that may have changed values prior to using this
  plugin command.
  * NOTE: If you are using the Battle Engine Core, using this won't be
  necessary for the majority of the time.

Anti-Audio Delay

FlushAudioCache BGM
FlushAudioCache BGS
FlushAudioCache ME
FlushAudioCache SE
FlushAudioCache ALL

These will clear the audio caches for the written type of audio. If you pick all, then all four types will be flushed out of memory. This will give your game a clear slate for the the audio cache, which means the game may lag a little bit upon reloading the new BGM files.

In my opinion, these plugin commands should never need to be used since the plugin will automatically clear them once the cache goes over the limit, but I'm just giving you control over the audio cache for your game just in case you want to do something with it.

Action Sequence Fast Forward/Skip

If your item/skill's battle action sequence runs a common event that requires you to temporarily stop Fast Forward and Skip Forward, you can use these plugin commands to control them:

STOP ACTION SEQUENCE FORWARD
- This will stop Fast Forward and Skip Forward at this point onward.

ALLOW ACTION SEQUENCE FORWARD
- This will reenable Fast Forward and Skip Forward from this point onward.

Animated Pictures

If you want to change the settings of specific pictures like loop or speed, please use these plugin commands to change them:

AnimatedPicture id NoLoop
- Replace id with the ID of the selected picture. The selected picture will
not loop after this plugin command takes effect.

AnimatedPicture id Loop
- Replace id with the ID of the selected picture. The selected picture will
loop after this plugin command takes effect.

AnimatedPicture id Speed x
- Replace id with the ID of the selected picture. Replace x with the number
of frames to wait in between animated cells. The higher the number, the
faster the picture will animate. The lower the number, the slower the picture
will animate. The lowest the speed can go is 1.

AnimatedPicture id Reset
- Replace id with the ID of the selected picture. This will reset the loop
and speed settings for that picture to whatever the value is in the plugin
parameters set for default.

Battle Engine Core

While the player is not in battle, you can change the battle system using a
Plugin Command. With only this plugin, there is only one battle system
included: the default battle system.

Plugin Command:
  setBattleSys DTB      Sets battle system to Default Turn Battle.

Other future plugins may include other battle systems that may utilize the
Battle Engine Core.

Battle System - ATB

To change your battle system to Active Turn Battle if it isn't the default
battle system, you can use the following Plugin Command:

Plugin Command:
  setBattleSys ATB      Sets battle system to Active Turn Battle.
  setBattleSys DTB      Sets battle system to Default Turn Battle.

Using the above Plugin Commands, you can toggle between the Default Battle
System and Active Turn Battle!

Battle System - CTB

To change your battle system to Charge Turn Battle if it isn't the default
battle system, you can use the following Plugin Command:

Plugin Command:
  setBattleSys CTB      Sets battle system to Charge Turn Battle.
  setBattleSys DTB      Sets battle system to Default Turn Battle.

Using the above Plugin Commands, you can toggle between the Default Battle
System and Charge Turn Battle!

Battle System - OTB (Order Turn Battle)

Because this is made with Battle Engine Core, you can change your game away from OTB if you want to. However, if you do, make sure you have the plugin parameter: "Force Battle System?" set to false.

setBattleSys OTB
This sets the battle system to Order Turn Battle

setBattleSys DTB
This sets the battle system to Default Turn Battle

Battle System - STB

To change your battle system to Standard Turn Battle if it isn't the default
battle system, you can use the following Plugin Command:

Plugin Command:
  setBattleSys STB      Sets battle system to Standard Turn Battle.
  setBattleSys DTB      Sets battle system to Default Turn Battle.

Using the above Plugin Commands, you can toggle between the Default Battle
System and Standard Turn Battle!

In-Battle Status

For those who would like to change whether the 'Status' option is shown or
hidden midway through the game, you can use the following plugin commands:

Plugin Commands:

  ShowInBattleStatus
  - This will cause the 'Status' command to show.

  HideInBattleStatus
  - This will cause the 'Status' command to not show.

Turn Order Display

Use the following plugin commands to control the Turn Order Display.

Plugin Command:

  EnableTurnOrderDisplay
  - Turns on the Turn Order Display to be shown in battle if the battle is
  a turn-based battle system can support the Turn Order Display.

  DisableTurnOrderDisplay
  - Turns off the Turn Order Display to be hidden in battle.

Bright Effects

Use plugin commands to change the bloom, godray, or color adjust settings after a map or battle has already loaded.

Bloom Plugin Commands

BrightEffects Bloom Scale x d
Scale: To adjust the strength of the bloom. Higher values is more
intense brightness.
- Replace x with a decimal value to change the Bloom Scale value.
- Replace d with the duration in frames on how long to make this change.
- This will cancel out any Map Horz/Vert notetags for Bloom Scale.

BrightEffects Bloom Brightness x d
Brightness: The brightness, lower value is more subtle brightness, higher
value is blown-out.
- Replace x with a decimal value to change the Bloom Brightness value.
- Replace d with the duration in frames on how long to make this change.
- This will cancel out any Map Horz/Vert notetags for Bloom Brightness.

BrightEffects Bloom Threshold x d
Threshold: Defines how bright a color needs to be to affect bloom.
- Replace x with a decimal value to change the Bloom Threshold value.
- Replace d with the duration in frames on how long to make this change.
- This will cancel out any Map Horz/Vert notetags for Bloom Threshold.

BrightEffects Bloom Reset
- Restores the map/battle's default settings.

Godray Plugin Commands

BrightEffects Godray Show
BrightEffects Godray Hide
Visible: If on, the godrays will be visible by default. If off, they won't.
- Show or hide the godray effect

BrightEffects Godray Speed x d
Speed: The speed at which the light flickers. Lower for slower rate. Higher
for faster speeds.
- Replace x with a decimal value to change the Godray Speed value.
- Replace d with the duration in frames on how long to make this change.
- This will cancel out any Map Horz/Vert notetags for Godray Speed.

BrightEffects Godray Gain x d
Gain: General intensity of the effect.
- Replace x with a decimal value to change the Godray Gain value.
- Replace d with the duration in frames on how long to make this change.
- This will cancel out any Map Horz/Vert notetags for Godray Gain.

BrightEffects Godray Lacunarity x d
Lacunarity: The density of the fractal noise.
- Replace x with a decimal value to change the Godray Lacunarity value.
- Replace d with the duration in frames on how long to make this change.
- This will cancel out any Map Horz/Vert notetags for Godray Lacunarity.

BrightEffects Godray Angle x d
Angle: The angle/light-source direction of the rays.
- Replace x with a positive/negative value to change the Godray Angle value.
- Replace d with the duration in frames on how long to make this change.
- This will cancel out any Map Horz/Vert notetags for Godray Angle.

BrightEffects Godray Reset
- Restores the map/battle's default settings.

Color Adjust Plugin Commands

BrightEffects ColorAdjust Brightness x d
Brightness: Adjusts the overall brightness of the screen. Use lower numbers
to make it darker and higher numbers to increase the brightness.
- Replace x with a decimal value to change the screen brightness value.
- Replace d with the duration in frames on how long to make this change.
- This will cancel out any Map Horz/Vert notetags for screen brightness.

BrightEffects ColorAdjust Contrast x d
Contrast: Increases the separation between dark and bright. Darker colors
become darker. Lighter colors become lighter. Increase this number to make
the effect more intense or decrease it to lessen it.
- Replace x with a decimal value to change the screen contrast value.
- Replace d with the duration in frames on how long to make this change.
- This will cancel out any Map Horz/Vert notetags for screen contrast.

BrightEffects ColorAdjust Saturate x d
Saturate: Adjusts the intensity of color on the screen. User higher numbers
to make colors more intense and lower numbers to make it less.
- Replace x with a decimal value to change the screen saturate value.
- Replace d with the duration in frames on how long to make this change.
- This will cancel out any Map Horz/Vert notetags for screen saturate.

BrightEffects ColorAdjust Reset
- Restores the map/battle's default settings.

Button Common Events

For those who would like for a way to toggle back and forth between the
bound common events and the default buttons, use these plugin commands.

Plugin Commands

  RevertButton Ok
  RevertButton Cancel
  RevertButton Dash
  RevertButton PageUp
  RevertButton PageDown
  RevertButton Left
  RevertButton Up
  RevertButton Right
  RevertButton Down
  RevertButton All
  - Reverts all keys bound to any of the original functions back to their
  original buttons and unbinds the common events bound to them. If the "All"
  function is reverted, then all affected buttons will revert back to their
  original functions.

  SwitchButton Ok
  SwitchButton Cancel
  SwitchButton Dash
  SwitchButton PageUp
  SwitchButton PageDown
  SwitchButton Left
  SwitchButton Up
  SwitchButton Right
  SwitchButton Down
  SwitchButton All
  - Switches all keys with original functions to use the common event binds
  instead of their original versions. If the "All" function is switched,
  then all affected buttons will switch to common event bindings if there
  are any.

  TriggerButton Ok
  TriggerButton Cancel
  TriggerButton Dash
  TriggerButton PageUp
  TriggerButton PageDown
  TriggerButton Left
  TriggerButton Up
  TriggerButton Right
  TriggerButton Down
  - This will cause the game to simulate triggering the button command of
  one of those original functions even if there is a common event bound to
  all of the keys of that original function.

Call Event

To call upon events from the current map or a different map, use the plugin
commands found below:

  Plugin Commands:

  CallEvent x
  - This will call upon event x from the current map and use the event list
  from the first page of the event.

  CallEvent x, Page y
  - This will call upon event x from the current map and use the event list
  from page y of the event.

  CallEvent x, Map y
  - This will call upon event x from map y and use the event list from the
  first page of the event.

  CallEvent x, Page y, Map z
  - This will call upon event x from map z and use the event list from
  page y of the event.

  CallEvent x, Map y, Page z
  - This will call upon event x from map y and use the event list from
  page z of the event.

*Note1: Because of the programming structure of RPG Maker MV's source, the
called event data may or may not be instantaneous depending on the size of
the map file that is needed to be loaded. At best, it will take a couple of
frames of loading time depending on the size.

*Note2: If any of the events, pages, and/or maps do not exist, then no
events will be called and the plugin will skip forward as if nothing has
happened. Be cautious about how you call these call events.

Class Change Core

Included in this plugin are multiple Plugin Commands to help assist you with
class changing for your game.

Plugin Command
  OpenClass
  - This opens the class changing scene.

  ShowClass
  HideClass
  - This shows/hides the Class option from the main menu.

  EnableClass
  DisableClass
  - This makes the Class option enabled/disabled.

  UnlockClass 5 6
  - This allows Actor 5 to unlock Class 6.

  RemoveClass 5 7
  - This causes Actor 5 to no longer access Class 7.

  UnlockClassAll 8
  - This unlocks Class 8 for the global pool.

  RemoveClassAll 9
  - This removes Class 9 from the global pool.

  EnablePrimaryClassChange 5
  DisablePrimaryClassChange 5
  - This enables/disables primary class changing for actor 5.

Subclass

You can use these following plugin commands to change subclassing throughout
the game!

Plugin Command:

  ShowSubclass
  HideSubclass
  - Shows/Hides the Subclass command in the Class Change Menu.

  EnableSubclass
  DisableSubclass
  - Enables/Disables the Subclass command in the Class Change Menu.

  ChangeSubclass x y
  - Changes actor x's subclass to y. Replace y with 0 to remove a subclass.

  EnableSubclassChange 5
  DisableSubclassChange 5
  - This enables/disables subclass changing for actor 5.

Common Event Menu

The following plugin commands are used to work the Common Event Menu. Look
over each of the settings carefully:

Plugin Command:

  ---

  ClearCommonEventMenu
  - This clears all the listed common events from the Common Event Menu Data
  pool meaning it has to be filled again. You can do so with the next plugin
  command:

  ---

  AddCommonEventMenu 1
     - or -
  AddCommonEventMenu 2, 3, 4, 5
     - or -
  AddCommonEventMenu 6 through 10
  - This will add the listed common event numbers into the common event list
  that will be shown in the common event menu.

  ---

  SetCommonEventMenuCancel 20
  - This will set the cancel button for the common event menu to run common
  event 20 when canceled. If it is left at 0, no event will run, but the
  menu can allow the cancel button to be pressed (and prematurely end it).

  ---

  DisableCommonEventMenuCancel
  EnableCommonEventMenuCancel
  - This will disable the cancel button for the common event menu from being
  pressed. Pressing cancel while the common event menu is active will do
  nothing. Use 'SetCommonEventMenuCancel x' to re-enable the cancel button.
  The Enable version will reenable the cancel function as 0.

  DisableCommonEventMenuConfirm
  EnableCommonEventMenuConfirm
  - This will disable the confirm button for the common event menu from
  being pressed. This is made for those who wish to use the menu only as a
  list and not a selectable menu. The Enable version will reenable the
  confirm function.

  ---

  OpenCommonEventMenu
  - After you've set everything up, this command will be used to open up the
  common event menu. This can be used on the map. If you are using the
  Battle Engine Core, this menu can be opened in battle as well. All of the
  common events listed by the 'AddCommonEventMenu' plugin command will
  appear in this list.

  ---

  CommonEventMenuX 0
  CommonEventMenuY this.fittingHeight(2)
  CommonEventMenuWidth Graphics.boxWidth / 2
  CommonEventMenuHeight Graphics.boxHeight - this.fittingHeight(2)
  CommonEventMenuOpacity 255
  CommonEventMenuColumns 1
  - These plugin commands allow you to adjust the x, y, width, height,
  opacity, and the number of columns used for the main common event menu
  list. Make sure all of these settings are done BEFORE the common event
  menu is opened with the 'OpenCommonEventMenu' plugin command.

  ---

  ShowCommonEventMenuHelp
  HideCommonEventMenuHelp
  - This will allow you to decide if the help window will be shown or hidden
  for the next 'OpenCommonEventMenu' plugin command usage.

  ---

  CommonEventMenuHelpX 0
  CommonEventMenuHelpY 0
  CommonEventMenuHelpWidth Graphics.boxWidth
  CommonEventMenuHelpHeight this.fittingHeight(2)
  CommonEventMenuHelpOpacity 255
  - These plugin commands allow you to adjust the x, y, width, height, and
  opacity of the help window for the common event menu list. Make sure all
  of these settings are done BEFORE the common event menu is opened with the
  'OpenCommonEventMenu' plugin command.

  ---

  ShowCommonEventMenuPicture
  HideCommonEventMenuPicture
  - This will allow you to decide if the help window will be shown or hidden
  for the next 'OpenCommonEventMenu' plugin command usage.

  ---

  CommonEventMenuPictureX Graphics.boxWidth / 2
  CommonEventMenuPictureY this.fittingHeight(2)
  CommonEventMenuPictureWidth Graphics.boxWidth / 2
  CommonEventMenuPictureHeight this.fittingHeight(10)
  CommonEventMenuPictureOpacity 255
  - These plugin commands allow you to adjust the x, y, width, height, and
  opacity of the picture window for the common event menu list. Make sure
  all of these settings are done BEFORE the common event menu is opened with
  the 'OpenCommonEventMenu' plugin command.

  ---

  ShowCommonEventMenuSubtext
  HideCommonEventMenuSubtext
  - This will allow you to decide if the help window will be shown or hidden
  for the next 'OpenCommonEventMenu' plugin command usage.

  ---

  CommonEventMenuSubtextX Graphics.boxWidth / 2
  CommonEventMenuSubtextY Graphics.boxHeight - height
  CommonEventMenuSubtextWidth Graphics.boxWidth / 2
  CommonEventMenuSubtextHeight Graphics.boxHeight - this.fittingHeight(2) -
    this.fittingHeight(10)
  CommonEventMenuSubtextOpacity 255
  - These plugin commands allow you to adjust the x, y, width, height, and
  opacity of the subtext window for the common event menu list. Make sure
  all of these settings are done BEFORE the common event menu is opened with
  the 'OpenCommonEventMenu' plugin command.

  ---

  SetCommonEventMenuSettings Default Setup
  SetCommonEventMenuSettings Basic Setup
  - This allows you to set the common event windows to position themselves
  to the default setup provided by the plugin parameters or a basic setup
  made of just the main list and a help window.

Common Event Menu Setup Pack 1

Use the following plugin commands to change the menu setup of your common
event menu before opening it up. To see what the layouts look like, please
refer to the Youtube video link and/or this plugin's page on Yanfly.moe.

Plugin Command:

  SetCommonEventMenuSettings Reverse Setup
  - This puts the Help Window at the top of the screen. The picture and
  subtext menus appear on the left left of the screen. The main list window
  appears on the right half of the screen.

  SetCommonEventMenuSettings Full Single Setup
  - This makes the main list window cover the entire screen. The help,
  picture, and subtext windows do not appear. There is only one column used.

  SetCommonEventMenuSettings Full Double Setup
  - This makes the main list window cover the entire screen. The help,
  picture, and subtext windows do not appear. There are two columns used.

  SetCommonEventMenuSettings Double Common Setup
  - The Help Window appears at the top of the screen with the main list
  window underneath it with two columns. The picture and subtext windows do
  not appear.

  SetCommonEventMenuSettings Double Subtext Setup
  - The Help Window appears at the top of the screen with the main list
  window underneath it with two columns. The subtext window appears at the
  bottom of the screen. The picture window does not appear.

  SetCommonEventMenuSettings Double Picture Setup
  - The Help Window appears at the top of the screen with the main list
  window underneath it with two columns. The picture window appears at the
  bottom of the screen. The subtext window does not appear.

  SetCommonEventMenuSettings Double Hybrid Setup
  - The Help Window appears at the top of the screen with the main list
  window underneath it with two columns. Both picture and subtext windows
  appear at the bottom of the screen with the picture window on the left
  side and the subtext window on the right side.

  SetCommonEventMenuSettings Double Reverse Hybrid Setup
  - The Help Window appears at the top of the screen with the main list
  window underneath it with two columns. Both picture and subtext windows
  appear at the bottom of the screen with the subtext window on the left
  side and the picture window on the right side.

  SetCommonEventMenuSettings Sandwich Single Setup
  - The Help Window appears at the top of the screen and the subtext window
  appears at the bottom. The main list is sandwiched in between using only
  one column.

  SetCommonEventMenuSettings Sandwich Double Setup
  - The Help Window appears at the top of the screen and the subtext window
  appears at the bottom. The main list is sandwiched in between using two
  columns for the common event list.

  SetCommonEventMenuSettings Sandwich Picture Setup
  - The Help Window appears at the top of the screen and the subtext window
  appears at the bottom. The main list is sandwiched in between using one
  column on the left side. The picture window is also sandwiched on the
  right side of the screen.

  SetCommonEventMenuSettings Sandwich Reverse Picture Setup
  - The Help Window appears at the top of the screen and the subtext window
  appears at the bottom. The picture window is sandwiched in between the two
  windows on the left half of the screen while the main list is sandwiched
  in between using one column on the right half.

Common Event Menu Setup Pack 2

Use the following plugin commands to change the menu setup of your common
event menu before opening it up. To see what the layouts look like, please
refer to the Youtube video link and/or this plugin's page on Yanfly.moe.

Plugin Command:

  SetCommonEventMenuSettings Side Subtext Setup
  - This puts the Help Window at the top of the screen. The main list will
  appear on the left half of the screen while the subtext window takes the
  right half of the screen. The picture window does not appear.

  SetCommonEventMenuSettings Side Reverse Subtext Setup
  - This puts the Help Window at the top of the screen. The main list will
  appear on the right half of the screen while the subtext window takes the
  left half of the screen. The picture window does not appear.

  SetCommonEventMenuSettings Subtext Picture Setup
  - This puts the Help Window at the top of the screen. The main list will
  appear on the left half of the screen while the subtext window takes the
  right half of the screen. The main list will be 4 lines tall while the
  picture window takes the remainder of the height.

  SetCommonEventMenuSettings Subtext Reverse Picture Setup
  - This puts the Help Window at the top of the screen. The main list will
  appear on the right half of the screen while the subtext window takes the
  left half of the screen. The main list will be 4 lines tall while the
  picture window takes the remainder of the height.

  SetCommonEventMenuSettings Picture Subtext Setup
  - This puts the Help Window at the top of the screen. The main list will
  appear on the left half of the screen while the picture window takes the
  right half of the screen. The main list will be 4 lines tall while the
  subtext window takes the remainder of the height.

  SetCommonEventMenuSettings Picture Reverse Subtext Setup
  - This puts the Help Window at the top of the screen. The main list will
  appear on the right half of the screen while the picture window takes the
  left half of the screen. The main list will be 4 lines tall while the
  subtext window takes the remainder of the height.

  SetCommonEventMenuSettings Side Picture Setup
  - This puts the Help Window at the top of the screen. The main list will
  appear on the left half of the screen while the picture window takes the
  right half of the screen. The subtext window does not appear.

  SetCommonEventMenuSettings Side Reverse Picture Setup
  - This puts the Help Window at the top of the screen. The main list will
  appear on the right half of the screen while the picture window takes the
  right left of the screen. The subtext window does not appear.

  SetCommonEventMenuSettings Left Half Setup
  - This puts the Help Window and main list on the left half of the screen.
  Everything is half width.

  SetCommonEventMenuSettings Left Half Subtext Setup
  - This puts the Help Window, main list, and subtext window on the left
  half of the screen. Everything is half width.

  SetCommonEventMenuSettings Left Half Picture Setup
  - This puts the Help Window, main list, and picture window on the left
  half of the screen. Everything is half width. The main list is only four
  commands tall.

  SetCommonEventMenuSettings Right Half Setup
  - This puts the Help Window and main list on the right half of the screen.
  Everything is half width.

  SetCommonEventMenuSettings Right Half Subtext Setup
  - This puts the Help Window, main list, and subtext window on the right
  half of the screen. Everything is half width.

  SetCommonEventMenuSettings Right Half Picture Setup
  - This puts the Help Window, main list, and picture window on the right
  half of the screen. Everything is half width. The main list is only four
  commands tall.

Core Engine

Plugin Command:
  GainGold 1234567890       # Party gains 1234567890 gold.
  LoseGold 9876543210       # Party loses 9876543210 gold.

Credits Page

For those who wish to display the credits window from the map scene during
the middle of your game, you can now do so with a plugin command!

Plugin Command:

  OpenCreditsWindow
  - Opens the credit window from in-game during the map scene. This will
  cause the player and events to be unable to move.

Damage Core

The following are plugins you can use to set the damage cap rulings for your
game. Keep in mind that individual aspects such as equipment traits, skill
properties, etc. will take priority over these default caps.

Plugin Command:
  SetDamageCap 9999     Sets the default damage cap to 9999.
  SetHealingCap 9999    Sets the default healing cap to 9999.
  EnableDamageCap       Enables default cap for both damage and healing.
  DisableDamageCap      Disables default cap for both damage and healing.

Dash Toggle

You can use these plugin commands to enable or disable dashing mid-game!

Plugin Command

  EnableDashing
  - Enables the player to be able to dash. However, this will not take
  priority in maps that disable dashing altogether.

  DisableDashing
  - Disables the player from being able to dash.

  ToggleDashing
  - This will enable/disable dashing. This will not take priority in maps
  that disable dashing altogether.

Dragonbones Event Pictures

Insert these for your Plugin Commands to control the Dragonbones armature attached to pictures.

Picture ID Dragonbones: filename

  -Replace 'ID' with the picture ID you want to attach a
   Dragonbones armature to.

  -Replace 'filename' with the base filename of the Dragonbones armature.

  -If no picture is already shown, one will be created and centered at the
   middle of the screen.

  -When a Dragonbones armature comes out, it will play the "Idle" animation
   by default if there is one (so please make your Dragonbones armatures
   with this in mind).

Picture ID Dragonbones Animation: animationName

  -Replace 'ID' with the picture ID you want to play an animation on.

  -Replace 'animationName' with the animation name used for the armature.

Picture ID Dragonbones Scale X: value
Picture ID Dragonbones Scale Y: value

  -Replace 'ID' with the picture ID you want to change the base
   Dragonbones armature scale of.

  -Replace 'value' with a float value depicting the rate.
   This is amplified by the picture's scale value.

Dragonbones Map Sprites

Insert these for your Plugin Commands to control the Dragonbones armature attached to a map sprite.

Actor id Dragonbones Sprite Animation: animation
Event id Dragonbones Sprite Animation: animation
Party index Dragonbones Sprite Animation: animation

  - Replace 'id' with the ID of the actor/event to target.
  - Replace 'index' with the index of the party member to target.
  - Replace 'animation' with the Dragonbones animation name to play.
    - Note: Case sensitive.
    - Replace 'animation' with "Clear Animation" to clear it.

You can change the Dragonbones map sprite properties of actors permanently by using the following plugin commands.

Actor id Dragonbones Sprite Filename: filename
Party index Dragonbones Sprite Filename: filename

  - Replace 'id' with the ID of the actor/event to target.
  - Replace 'index' with the index of the party member to target.
  - Replace 'filename' with the Dragonbones Armature's name.
    - Note: Case sensitive.

Actor id Dragonbones Sprite Scale: x, y
Party index Dragonbones Sprite Scale: x, y

  - Replace 'id' with the ID of the actor to target.
  - Replace 'index' with the index of the party member to target.
  - Replace 'x' and 'y' with the amount to scale the sprite by.

Actor id Dragonbones Sprite Speed: x
Party index Dragonbones Sprite Speed: x

  - Replace 'id' with the ID of the actor to target.
  - Replace 'index' with the index of the party member to target.
  - Replace 'x' with the base speed of the animation.
    - 1 is normal speed.

Actor id Dragonbones Sprite Size: width, height
Party index Dragonbones Sprite Size: width, height

  - Replace 'id' with the ID of the actor to target.
  - Replace 'index' with the index of the party member to target.
  - Replace 'width' and 'height' with values to determine the sprite's size.
  - Dragonbones armatures don't use width and height but other plugins do.

Actor id Dragonbones Sprite Flip Left: true
Actor id Dragonbones Sprite Flip Left: false
Actor id Dragonbones Sprite Flip Right: true
Actor id Dragonbones Sprite Flip Right: false

Party index Dragonbones Sprite Flip Left: true
Party index Dragonbones Sprite Flip Left: false
Party index Dragonbones Sprite Flip Right: true
Party index Dragonbones Sprite Flip Right: false

  - Replace 'id' with the ID of the actor to target.
  - Replace 'index' with the index of the party member to target.
  - Turns 'Flip Left' or 'Flip Right' on/off.

Actor id Dragonbones Motion type: animation
Party index Dragonbones Motion type: animation

  - Replace 'id' with the ID of the actor to target.
  - Replace 'index' with the index of the party member to target.
  - Replace 'type' with any of the following:
    - Idle
    - Walk
    - Dash
    - Jump
    - Ladder Idle
    - Ladder Climb
  - Replace 'animation' with the Dragonbones animation name to use for that
    specific motion type. This is case sensitive.

Enemy Levels

If you wish to change enemy levels through plugin commands, you can use the
following plugin commands to alter them. These plugin commands are only used
inside battle.

Plugin Command:

  EnemyLevelChange 2 to 50
  - This will reset the enemy in position 2's level to 50.

  EnemyLevelChangeAll 50
  - This will change the levels of all enemies to 50.

  EnemyGainLevel 3 by 20
  - This will cause the enemy in positon 3 to gain 20 levels.

  EnemyGainLevelAll 20
  - This will cause all enemies to gain 20 levels.

  EnemyLoseLevel 4 by 10
  - This will cause the enemy in positon 4 to lose 10 levels.

  EnemyLoseLevelAll 10
  - This will cause all enemies to lose 10 levels.

  EnemyLevelReset 5
  - This will reset the enemy in position 5's level to the level it had at
  the start of battle.

  EnemyLevelResetAll
  - This will reset all enemy levels to their original levels.

Difficulty Slider

For those who wish to show/hide the Difficulty Slider from the options menu
midway through the game, you can control it using these plugin commands:

Plugin Commands:

  ShowDifficultySlider
  - This will show the Difficulty Slider and enable it making it apply to
  all enemies in the game that do not have an unaffected notetag.

  HideDifficultySlider
  - This will hide the Difficulty Slider and also disable the slider's
  effects on enemy levels in the game.

Enhanced TP

You can use the following Plugin Commands to alter Enhanced TP.

Plugin Command:

  ShowTpMode
  HideTpMode
  This will show/hide the TP Mode from the Skill Menu.

  EnableTpMode
  DisableTpMode
  This will enable/disable the TP Mode in the Skill Menu.

  ChangeTpMode Actor 1 to 5
  This will change the TP mode of Actor 1 to TP Mode 5.

  ChangeTpMode Party 2 to 6
  This will change the TP mode of Party Member 2 to TP Mode 6.

  UnlockTpMode Actor 3 Mode 7
  This will make Actor 3 unlock TP Mode 7.

  UnlockTpMode Party 4 Mode 8
  This will make Party Member 4 unlock TP Mode 8.

  RemoveTpMode Actor 1 Mode 9
  This will make Actor 1 remove TP Mode 9.

  RemoveTpMode Party 2 Mode 10
  This will make Party Member 2 remove TP Mode 10.

  UnlockAllTpModes Actor 1
  This will make Actor 1 unlock all TP modes.

  UnlockAllTpModes Party 2
  This will make Party member 2 unlock all TP modes.

  RemoveAllTpModes Actor 1
  This will make Actor 1 remove all TP modes.

  RemoveAllTpModes Party 2
  This will make Party member 2 remove all TP modes.

Equip Battle Skills

You can use the following plugin commands to increase or decrease the amount
of battle slots for specific actors.

Plugin Command:

  IncreaseActorBattleSlots 3 by 4
  - This will increase actor 3's number of battle skill slots by 4. The
  total amount of battle skill slots cannot go beyond the 'Maximum Skills'
  plugin parameter.

  DecreaseActorBattleSlots 5 by 2
  - This will decrease actor 5's number of battle skill slots by 2. The
  total amount of battle skill slots cannot go beneath 1.

Here are some plugin commands you can use for your game!

Plugin Command:

  EnableEquipBattleSkills
  - This will enable the 'Equip Skills' command in the skill menu.

  DisableEquipBattleSkills
  - This will disable the 'Equip Skills' command in the skill menu.

  ShowEquipBattleSkills
  - This will show the 'Equip Skills' command in the skill menu.

  HideEquipBattleSkills
  - This will hide the 'Equip Skills' command in the skill menu.

Equip Core

Equip Customize Command

There's a couple of plugin commands you can use with this plugin.

Plugin Command:

  ShowEquipCustomize
  - This will show the 'Customize' command in the equip menu.

  HideEquipCustomize
  - This will hide the 'Customize' command in the equip menu.

Event Chase Player

Event Chase Stealth

You can use the following Plugin Commands to adjust Stealth Mode in your
game mid-game!

Plugin Command:

  StealthTime x
  - Puts the player character into Stealth Mode for x frames. Once the
  timer is up, the player exits Stealth Mode.

  StealthMode On
  - Puts the player character into Stealth Mode. There is no timer for this.

  StealthMode Off
  - Puts the player character out of Stealth Mode. This also resets the
  Stealth Timer to 0.

  EnableStealthDash
  - Enables the player to be able to dash while in Stealth Mode.

  DisableStealthDash
  - Disables the player from being able to dash while in Stealth Mode.

  SetStealthMoveSpeed x
  - Sets the move speed while in Stealth Mode to x.

  HideStealthGauge
  - This prevents the Stealth Gauge from being shown at all.

  ShowStealthGauge
  - This will show the Stealth Gauge whenever the player is in Stealth Mode.

  EnableDifferentStealthSpeed
  - Sets the player to have a different move speed when in Stealth Mode.

  DisableDifferentStealthSpeed
  - The player won't have a different move speed when in Stealth Mode.

Event Mini Label

If you would like to shut off the Event Mini Label mid-game or turn it on,
you can use the following plugin commands:

Plugin Command:

  HideMiniLabel
  Hides all Event Mini Label.

  ShowMiniLabel
  Shows all Event Mini Label.

  RefreshMiniLabel
  Refreshes all Event Mini Labels on the map.

Event Timer Control

Use the following plugin commands to make use of the new features added by
this plugin to control the event timer.

Plugin Commands:

  --- PAUSE/RESUME ---

  EventTimer Pause
  - Pauses the event timer.

  EventTimer Resume
  - Resumes the event timer if it has been paused.

  --- COUNT DOWN/UP ---

  EventTimer Countdown
  - Changes the direction of the event timer to decrease and count down
  towards 0 seconds.

  EventTimer Count Up
  - Changes the direction of the event timer to increase and count upwards
  endlessly until manually stopped

  EventTimer Count Toggle
  - Switches the current direction of the event timer to either increase or
  decrease each second it is active.

  --- INCREASE/DECREASE ---

  EventTimer Increase x Frames
  EventTimer Decrease x Frames
  - Replace 'x' with a number value to determine how many frames to
  increase or decrease the event timer by.

  EventTimer Increase x Seconds
  EventTimer Decrease x Seconds
  - Replace 'x' with a number value to determine how many seconds to
  increase or decrease the event timer by.

  EventTimer Increase x Minutes
  EventTimer Decrease x Minutes
  - Replace 'x' with a number value to determine how many minutes to
  increase or decrease the event timer by.

  EventTimer Increase x Hours
  EventTimer Decrease x Hours
  - Replace 'x' with a number value to determine how many hours to
  increase or decrease the event timer by.

  You can also combine them together as such:

  EventTimer Increase x Hours, y Seconds
  EventTimer Increase x Hours, y Minutes
  EventTimer Increase x Minutes, y Seconds
  EventTimer Increase x Hours, y Minutes, z Seconds

External Links

If you wish to send players to other links, you can use the following
plugin commands.

Plugin Command
  OpenNewTab http://www.google.com/     Opens link in a new tab.
  OpenNewWindow http://www.google.com/  Opens link in a new window.

Some web browsers may not differentiate these commands too much.

Footstep Sounds

If at any time you wish to enable/disable footstep sounds in your game, you
can use some plugin commands to do so.

Plugin Commands:

  EnableFootsteps
  - Turns on footstep sounds.

  DisableFootsteps
  - Turns off footstep sounds.

Force Advantage

Use the following plugin commands to force a battle advantage on the next
upcoming battle:

Plugin Command:

  ForceAdvantage Pre-Emptive
  ForceAdvantage Preemptive
  ForceAdvantage First Strike
  ForceAdvantage Player
  - Forces a pre-emptive strike giving the player the advantage.

  ForceAdvantage Surprise
  ForceAdvantage Back Attack
  ForceAdvantage Enemy
  - Forces a surprise attack giving the enemy party the advantage.

  ForceAdvantage None
  ForceAdvantage Normal
  ForceAdvantage Neutral
  - Forces a neutral advantage where neither party has the advantage.

  ForceAdvantage Clear
  - Clears any forced advantage settings imposed by the above commands.

Gab Window

Using the Gab Window is quite simple. By default, it can be used in either
the map scene or the battle scene. To call upon it, you will to use a few
Plugin Commands to set up what you wish for the Gab Window to display.

Plugin Commands:

--- Setup Commands ---

GabText text
This will set the gab window to type out the above text. Text codes can be
used for the Gab Window.

GabFaceName filename
If you wish to display a face graphic, use this plugin command to have it
display a face from the filename.

GabFaceIndex x
Used in combination with the above plugin command to define which index the
face will use.

GabSpriteName filename
If you wish to display a particular character sprite, use this plugin
command to have it display a sprite from the filename.

GabSpriteIndex x
Used in combination with the above plugin command to define which index the
sprite will use.

GabActor x
GabActorFace x
This will display actor x's face graphic where x is the actor's ID.

GabActorSprite x
This will display actor x's sprite graphic where x is the actor's ID.

GabParty x
GabPartyFace x
This will display party member x's face graphic where x is the position.

GabPartySprite x
This will display party member x's sprite graphic where x is the position.

GabSound filename
This will play a sound from the SE folder under that particular filename.

GabSwitch x
This will enable switch x when this gab finishes playing.

WaitForGab
Causes the game to wait until all gabs are finished playing.

--- Display Commands ---

ShowGab
Once the above settings are complete, use this Plugin Command to launch the
Gab Window and display the above data. This will put the gab data into a
queue which means if there's another gab playing, this will be next in line.

*Note If multiple ShowGabs are used, they will be queued up. The current
playing gab will finish playing before moving onto the next. If it so
happens that the inputted Gab would have the same exact settings as a
previously loaded gab within the same queue, it will not be inserted to
prevent any redundancy amongst the conversation.

ForceGab
Once the above settings are complete, use this Plugin Command to clear all
the other gabs in the Gab Window and display the above data.

ClearGab
This clears out the Gab Window of the current gab and any gabs queued.

Help File Access

You can use the following plugin commands to adjust how accessing the help
file is done for your game.

Plugin Commands

  OpenHelp
  - This will open up the help file or URL for your game.

  ShowMenuHelpCommand
  - Will make the 'Help' command show up in the main menu.

  HideMenuHelpCommand
  - Will make the 'Help' command hidden in the main menu.

Horror Effects

To apply horror effects to your game, use these plugin commands in the following format:

Main

HorrorEffects target Create Noise
HorrorEffects target Create Glitch
HorrorEffects target Create TV
- Replace 'target' with a compatible effect target. This will create a horror
noise, glitch, or TV effect on the sprite.

HorrorEffects target Remove Noise
HorrorEffects target Remove Glitch
HorrorEffects target Remove TV
- Replace 'target' with a compatible effect target. This will remove the
currently existing horror noise, glitch, or TV effect on the sprite.

HorrorEffects target Clear
- Replace 'target' with a compatible effect target. This will remove all
noise, glitch, or TV effects from the sprite.

HorrorEffects target Change Noise Rate x
- Replace 'target' with a compatible effect target. Replace 'x' with a number
value. The higher the number value, the more noise there is. The lower the
number value, the less noise there is. This can be a decimal value.

HorrorEffects target Change Noise Animated true
HorrorEffects target Change Noise Animated false
- Replace 'target' with a compatible effect target. This will animate the
horror noise if true is used and stop animating the horror noise if false
is used instead.

HorrorEffects target Change Glitch Max x
- Replace 'target' with a compatible effect target. This will set the maximum
number of glitch slices to x.

HorrorEffects target Change Glitch Min x
- Replace 'target' with a compatible effect target. This will set the minimum
number of glitch slices to x.

HorrorEffects target Change Glitch Slice x
- Replace 'target' with a compatible effect target. This will set the maximum
and minimum number of glitch slices to x.

HorrorEffects target Change Glitch Offset x
- Replace 'target' with a compatible effect target. This will set the glitch
offset (how wild it goes) to x. The higher the number, the further the glitch
can go. The lower the number, the closer to the base image it goes.

HorrorEffects target Change Glitch Animated true
HorrorEffects target Change Glitch Animated false
- Replace 'target' with a compatible effect target. This will animate (true)
or remove the animation (false) of the glitch effect.

HorrorEffects target Change Glitch Frequency x
- Replace 'target' with a compatible effect target. If animated, this will
set the glitch frequency to x frames.

HorrorEffects target Change Glitch Strength x
- Replace 'target' with a compatible effect target. If animated, this will
set the glitch strength to x. The higher the number, the stronger the glitch
effect will last. The lower the number, the weaker the effect.

HorrorEffects target Change Glitch Refresh
- Replace 'target' with a compatible effect target. Refreshes the current
glitched slices for a different setting.

HorrorEffects target Change TV Thickness x
- Replace 'target' with a compatible effect target. This will change the
line thickness of the TV effect. Larger numbers mean thicker lines.

HorrorEffects target Change TV Corner x
- Replace 'target' with a compatible effect target. This will change the
corner size. Use a value between 0 and 1. The larger the number, the larger
the corners will be.

HorrorEffects target Change TV Animated true
HorrorEffects target Change TV Animated false
- Replace 'target' with a compatible effect target. true will turn the TV
effect on. false will turn the TV effect off.

HorrorEffects target Change TV Speed x
- Replace 'target' with a compatible effect target. This will change the
speed at which the TV animates.

Targets

These are things you can replace 'target' with:

Screen
- Target becomes the visible map

Battle
- Target becomes the battle screen

Player
- Target becomes the first party member

Follower x
- Target becomes the party member with slot x

Event x
- Target becomes the map event with ID x

Picture x
- Target becomes the picture with ID x

Actor x
- Target becomes the actor with ID x

Party x
- Target becomes the party member with slot x

Enemy x
- Target becomes the battle enemy with index x

Icon Balloons

Use these plugin commands to get icon balloons playing on the player/events.

Plugin Commands

  ---

  ShowIconBalloon x on Player
  ShowIconBalloon x on Player, Wait

  ShowIconBalloon x on Event y
  ShowIconBalloon x on Event y, Wait

  ShowIconBalloon x on Follower y
  ShowIconBalloon x on Follower y, Wait

  ShowIconBalloon x on This Event
  ShowIconBalloon x on This Event, wait
  - This will cause the Icon Balloon using icon index x to appear on the
  player, event y, or follower y. If 'wait' is used, then the event will
  wait until the balloon has finished playing.

  ---

  ShowIconBalloon x to y on Player
  ShowIconBalloon x to y on Player, Wait

  ShowIconBalloon x to y on Event z
  ShowIconBalloon x to y on Event z, Wait

  ShowIconBalloon x to y on Follower z
  ShowIconBalloon x to y on Follower z, Wait

  ShowIconBalloon x to y on This Event
  ShowIconBalloon x to y on This Event, Wait
  - This will cause the Icon Balloon start on icon index x and move through
  to y, the next icon upward each few frames up to icon index y. This icon
  balloon will be played on the player, event z, or follower z. If 'wait' is
  used, then the event will wait until the balloon has finished playing.
  When using this command, x cannot be greater than y.

Improved Battlebacks

You can use the following plugin commands to alter how battlebacks behave in
your game. Keep in mind that these plugin commands must be used while the
party is in battle.

---

BATTLEBACK id ADD: folder, filename
BATTLEBACK id ADD: folder, filename, hue
- Replace 'id' with the battleback you wish to alter as a number larger than
2 (i.e. 3 or above). Replace 'folder' with the exact folder name in your
project's 'img' folder (case sensitive). Replace 'filename' with the image
filename without the file extension (case sensitive). If 'hue' is used,
replace 'hue' with a number between 0 and 360 to change the hue of the image
used. This will add a new battleback stacked on top of battlebacks 1 and 2
with higher ID's being on top. When newly added, the new battleback will
start at opacity 0 and fade in with a duration of 20 frames.

BATTLEBACK id REMOVE
- Replace 'id' with the battleback you wish to alter as a number larger than
2 (i.e. 3 or above). This will remove the battleback from being shown. When
this command is used, the battleback will fade with a duration of 20 frames.
Once it reaches 0 opacity, the battleback will be removed from the battle.

BATTLEBACK id CHANGE TO: folder, filename
BATTLEBACK id CHANGE TO: folder, filename, hue
- Replace 'id' with the battleback you wish to alter. Replace 'folder' with
the exact folder name in your project's 'img' folder (case sensitive).
Replace 'filename' with the image filename without the file extension (case
sensitive). This will change the designated battleback's image to use the
desired image depicted by the folder and filename. If 'hue' is used, replace
'hue' with a number between 0 and 360 to change the hue of the image used.

BATTLEBACK id FADE OUT
BATTLEBACK id FADE OUT: duration
BATTLEBACK id FADE IN
BATTLEBACK id FADE IN: duration
- Replace 'id' with the battleback you wish to alter. This will cause the
designated battleback to fade out/in. If 'duration' is used, replace it with
a number to indicate how many frames will be used for the fade out/in. If
no duration is specified, it will default to 20 frames.

BATTLEBACK id OPACITY: n
BATTLEBACK id OPACITY: n%
- Replace 'id' with the battleback you wish to alter. Replace 'n' with the
opacity value you wish to achieve (from 0 to 255) or replace 'n%' with the
opacity rate you wish to set the battleback to (from 0% to 100%). This will
set the designated battleback's opacity to that value. If there are any fade
in or out commands occurring as this command is issued, they'll be disabled.

BATTLEBACK id SCROLL SPEED X: +n
BATTLEBACK id SCROLL SPEED X: -n
BATTLEBACK id SCROLL SPEED Y: +n
BATTLEBACK id SCROLL SPEED Y: -n
- Replace 'id' with the battleback you wish to alter. Replace 'n' with the
value you wish to change the scroll speed X or scroll speed Y of. The higher
the 'n' value, the faster it scrolls.

BATTLEBACK id RESET SCROLL SPEED
- Replace 'id' with the battleback you wish to alter. Resets the scroll
speeds for X and Y back to 0.

Item Core

If you wish to be able to add items to your player's inventory without the
random variance being applied to it, you can use the following plugin
commands to adjust the settings for that.

Plugin Command:
  EnableVarianceStock  - Causes all items acquired from this point forward
                         to have its variance give stock (nonrandom) values.
  DisableVarianceStock - Causes all items acquired from this point forward
                         to have its variance give random values.

A small note is that if you enabled the variance stock values, if the player
restarts the game by either going through the title screen or just turning
off the program and starting it back up, the random variance will be in
effect again. This plugin command is meant to exist as a short term disable.

Attachable Augments

There's a couple of pluging commands you can use with this plugin.

Plugin Command:

  EnableAugments
  - This will enable augments in the item action menu. With them enabled,
  the player can now attach and detach augments to their items.

  DisableAugments
  - This will disable augments in the item action menu and hide their
  options so that the player will be unable to attach or detach augments
  from their items.

  ShowAugments
  - This will show the augments in the item info window when looking at
  item details.

  HideAugments
  - This will hide the augments in the item info window when looking at
  item details.

Item Disassemble

You can use the following plugin commands to alter Item Disassemble related
aspects of your game:

Plugin Command:

  ShowItemDisassemble
  - Shows the Disassemble command in the item menu if the item permits
  disassembling.

  HideItemDisassemble
  - Hides the Disassemble command in the item menu regardless.

Item Durability

There are a few plugin commands you can utilize to show/hide the Repair
option in the Item Action Window and/or enable/disable it.

Plugin Commands

  ShowRepairDurability
  HideRepairDurability
  - This will show/hide the Repair command in the Item Action Window.

  EnableRepairDurability
  DisableRepairDurability
  - This will enable/disable the Repair command in the Item Action Window.

Item Upgrade Slots

The following are some Plugin Commands you can use for your game regarding
the upgrade option in the item menu:

Plugin Command:
  ShowItemUpgrade    - Shows the upgrade option in the item menu.
  HideItemUpgrade    - Hides the upgrade option in the item menu.
  DisableItemUpgrade - Disables the upgrade option in the item menu.
  EnableItemUpgrade  - Enables the upgrade option in the item menu.

You can use those Plugin Commands at any time to adjust the upgrade option.

Item Synthesis

The following are Plugin Commands you may use with events.

Plugin Command:
  OpenSynthesis          Opens up the Synthesis Scene from the field.
  ShowSynthesis          Shows the Synthesis command from the main menu.
  HideSynthesis          Hides the Synthesis command from the main menu.
  EnableSynthesis        Enables the Synthesis command from the main menu.
  DisableSynthesis       Disables the Synthesis command from the main menu.

For those who wish to make the player synthesize only specific recipes, you
can use the following command.

  OpenSynthesis Item 15 Recipe
  - or -
  OpenSynthesis Weapon 20 Recipe
  - or -
  OpenSynthesis Armor 30 Recipe

This will make the synthesis menu, when opened up, only allow the recipes of
the Item 15, Weapon 20, or Armor 30 without needing it and not showing the
recipes of any recipe items within the player's inventory.

Job Points

For those wondering how to manually give, remove, or set JP for an actor,
you can use the following Plugin Commands.

Plugin Commands:

  gainJp actorId jp
  gainJp actorId jp classId
  Replace 'actorId' with the ID of the actor you wish to change the JP of.
  Replace 'jp' with the amount of JP you wish to alter. If you are using
  'classId', replace it with the ID of the actor's class you wish to alter.
  This command will let the actor gain JP.

  loseJp actorId jp
  loseJp actorId jp classId
  Replace 'actorId' with the ID of the actor you wish to change the JP of.
  Replace 'jp' with the amount of JP you wish to alter. If you are using
  'classId', replace it with the ID of the actor's class you wish to alter.
  This command will cause the actor to lose JP.

  setJp actorId jp
  setJp actorId jp classId
  Replace 'actorId' with the ID of the actor you wish to change the JP of.
  Replace 'jp' with the amount of JP you wish to alter. If you are using
  'classId', replace it with the ID of the actor's class you wish to alter.
  This command will set the actor's JP to a particular value.

Map Gold Window

Use the following plugin commands to control the gold window.

Plugin Command:

  OpenMapGoldWindow
  Opens the map gold window.

  CloseMapGoldWindow
  Closes the map gold window.

  MapGoldWindowPosition x
  Changes the screen position of the map gold window to x. Refer to the
  NumPad for the screen position like below:

  7   8   9
  4   5   6
  1   2   3

  If you set the value to 0, it will maintain its current position but will
  automatically move itself to a different location if it intrudes on the
  message window.

Map Select Equip

Use the following plugin commands to utilize the Map Select Equip plugin.

--- Plugin Commands ---

MapSelectEquip var type
- This will open up the Map Select Equip window. Replace 'var' with the ID
of the variable you wish to set the selected item to. Replace 'type' with
'weapon', 'armor', or 'both'. The 'type' will decide the list type.

MapSelectEquipColumns x
- Sets the number of columns for the Map Select Equip Window to x.

MapSelectEquipRows x
- Sets the number of rows for the Map Select Equip Window to x.

MapSelectEquipWidth x
- Sets the width for the Map Select Equip Window to x. If 0 is used, then
the window width will be the screen width.

MapSelectEquipX left
MapSelectEquipX center
MapSelectEquipX right
- Sets the Map Select Equip Window to be aligned to the left side of the
screen, center of the screen, or right side of the screen.

MapSelectEquipY top
MapSelectEquipY middle
MapSelectEquipY bottom
- Sets the Map Select Equip Window to be aligned to the top of the screen,
middle of the screen, or bottom of the screen.

ShowMapSelectEquipQuantity
- Show the quantity of the Equips in the Map Select Equip Window.

HideMapSelectEquipQuantity
- Hide the quantity of the Equips in the Map Select Equip Window.

Map Select Skill

Use the following plugin commands to utilize the Map Select Skill plugin.

--- Plugin Commands ---

MapSelectSkill v a s
- This will open up the Map Select Skill window. Replace 'v' with the ID of
the variable you wish to set to the selected skill. Replace 'a' with the ID
of the actor whose skill list you want to see. 's' is optional, but if used,
it will display the skills from skill type 's' only. Replace 's' with the
skill type's ID number.

MapSelectSkillColumns x
- Sets the number of columns for the Map Select Skill Window to x.

MapSelectSkillRows x
- Sets the number of rows for the Map Select Skill Window to x.

MapSelectSkillWidth x
- Sets the width for the Map Select Skill Window to x. If 0 is used, then
the window width will be the screen width.

MapSelectSkillX left
MapSelectSkillX center
MapSelectSkillX right
- Sets the Map Select Skill Window to be aligned to the left side of the
screen, center of the screen, or right side of the screen.

MapSelectSkillY top
MapSelectSkillY middle
MapSelectSkillY bottom
- Sets the Map Select Skill Window to be aligned to the top of the screen,
middle of the screen, or bottom of the screen.

EnableAllMapSelectSkills
- This will cause all of the skills listed to become selectable regardless
of whether or not the actor is able to use them at the time.

NormalAllMapSelectSkills
- This will cause all of the skills listed to be enabled or disabled based
on whether or not the actor is able to use the skill at the time.

ShowMapSelectSkillCost
- Show the cost of the skills in the Map Select Skill Window.

HideMapSelectSkillCost
- Hide the cost of the skills in the Map Select Skill Window.

Map Status Window

There's plugin commands associate with the Map Status Window that you may
use here!

Plugin Commands:

 OpenMapStatusWindow
 - This will open the Map Status Window while on the map scene. It will be
 automatically refreshed before opening.

 CloseMapStatusWindow
 - This will close the Map Status Window while on the map scene.

 ToggleMapStatusWindow
 - This will switch the Map Status Window between the open and close status
 while on the map scene. When it opens, the window will be refreshed.

 RefreshMapStatusWindow
 - You can force the window to refresh with this command.

 SetMapStatusWindowX n
 - This will set the X position of the Map Status Window to n. You can use a
 formula for n. This position will persist.

 SetMapStatusWindowY n
 - This will set the Y position of the Map Status Window to n. You can use a
 formula for n. This position will persist.

Message Core

The following are some plugin commands you can use through the Event Editor
to change various aspects about the Message system.

Plugin Comand
  MessageRows 6
  - Changes the Message Rows displayed to 6. If you are using continuous
  Show Text events, this will continue displaying the following lines's
  texts until it hits the row limit. Anything after that is cut off until
  the next message starts to avoid accidental overlap.

  MessageWidth 400
  - Changes the Message Window Width to 400 pixels. This will cut off any
  words that are shown too far to the right so adjust accordingly!

  EnableWordWrap
  - Enables wordwrapping. If a word extends past the window size, it will
  automatically move onto the next line. Keep in mind, you will need to use
  \br to perform line breaks.

  DisableWordWrap
  - This disables wordwrapping. Line breaks will be automatic at points
  where a new line is started in the editor.

  EnableFastForward
  - Enables Fast Forward key from working with messages.

  DisableFastForward
  - Disables Fast Forward key from working with messages.

Extended Message Pack 1

You can use the following plugin commands to adjust a few of the settings
regarding the Message Window.

Plugin Commands

  --- Letter Sounds ---

  EnableLetterSound
  DisableLetterSound
  - These commands will enable or disable the letter sounds respectively.

  LetterSoundName Cursor2
  - This will replace the current letter sound with the written filename.
  The filename is case sensitive. Do not use the file extension.

  LetterSoundVolume 100
  - This will change the letter sound volume to 100.

  LetterSoundPitch 125
  - This will change the letter sound pitch to 125.

  LetterSoundPitchVariance 10
  - This will cause the letter sound's pitch to fluctuate between -10 & 10.

  LetterSoundPan 0
  - This will change the letter sound's pan to 0.

  LetterSoundPanVariance 10
  - This will cause the letter sound's pan to fluctuate between -10 and 10.

  LetterSoundInterval 2
  - This will change the interval at which the letter sounds are played to
  2 letters. Change it to 0 to play on every letter written out.

  LetterSoundReset
  - This will reset the letter sounds to their default settings.

  --- Choice Settings ---

  ChoiceRowMax 4
  - This will set the maximum amount of visible choices to 4.

  HideChoice 5
  - This will cause choice 5 to be hidden.

  ShowChoice 6
  - This will cause choice 6 to be shown and no longer hidden.

  ClearHiddenChoices
  - All choices become visible and are no longer hidden.

  DisableChoice 1
  - This will cause choice 1 to be disabled.

  EnableChoice 2
  - This will cause choice 2 to be enabled.

  ClearDisabledChoices
  - All choices become enabled and are no longer disabled.

  ClearChoiceSettings
  - All choices are shown and enabled.

  --- Message Window Positions ---

  MessageRows 6
  - Changes the Message Rows displayed to 6. If you are using continuous
  Show Text events, this will continue displaying the following lines's
  texts until it hits the row limit. Anything after that is cut off until
  the next message starts to avoid accidental overlap.

  MessageWidth 400
  - Changes the Message Window Width to 400 pixels. This will cut off any
  words that are shown too far to the right so adjust accordingly!

  MessagePositionX 300
  - Sets the Message Window's X Position to 300. This position will be
  relative to its horizontal anchor point.

  MessagePositionY 400
  - Sets the Message Window's Y Position to 400. This position will be
  relative to its vertical anchor point.

  MessagePositionXAuto
  - Sets the Message Window's X Position to be automatically fitted and not
  set relative to its horizontal anchor point.

  MessagePositionYAuto
  - Sets the Message Window's Y Position to be automatically fitted and not
  set relative to its vertical anchor point.

  MessageAnchorX left
  - Sets the Message Window's x anchor to 'left', 'center', or 'right' if
  you are using specified coordinates.

  MessageAnchorY bottom
  - Sets the Message Window's y anchor to 'top', 'center', or 'bottom' if
  you are using specified coordinates.

  MessagePositionReset
  - Resets both the Message Window's X and Y Positions to its automatic
  positions and not adjusted to its anchor points. The Message Width and the
  Message Rows.

Message Backlog

The following plugin commands can be used to alter various settings
regarding the Message Backlog.

Plugin Command:

  EnableMessageBacklog
  DisableMessageBacklog
  - This enables/disables the message backlog from being playeraccessed.

  EnableMessageLogging
  DisableMessageLogging
  - If enabled, new messages will be recorded to the backlog.
  If disabled, they won't be recorded.

  OpenMessageBacklog
  - This will forcefully open the message backlog if done on the map scene.
  (Highly recommended to be used with Button Common Events)

Music Menu

You can use the following plugin commands to alter the music menu settings
for your game in many ways.

Plugin Commands:

  GoToMusicMenu
  - Sends the player to the music menu scene.

  AllMusicMenuSongs
  - Unlocks all music for the player without the player needing to hear it
  in the game at least once.

  NormalMusicMenuSongs
  - Removes the unlock all setting. The player now needs to hear music in
  the game at least once to unlock the song. This does not remove already
  unlocked song entries.

  UnlockMusicMenuSong x
  UnlockMusicMenuSong x x x
  - This will unlock song ID x for the game. Use multiple x's to unlock a
  group of songs at once. x will refer to the ID found in the plugin's
  parameters. The referred song will be unlocked without the player needing
  to hear the song in the game at least once.

Notification Window

Displaying a notification can be achieved through Plugin Commands. Notifications may appear in any scene.

  Notify: text
  - Replace 'text' with the text you wish to display.
  - This can use text codes.
  - This will appear in the 'Default Location' set by the Plugin Parameter.

  Notify1: text
  Notify2: text
  Notify3: text
  Notify4: text
  Notify5: text
  Notify6: text
  Notify7: text
  Notify8: text
  Notify9: text
  - Use the number corresponding to the NumPad to determine screen location.
  - Replace 'text' with the text you wish to display.
  - This can use text codes.

  NotifyColor: rgba(255, 0, 0, 1)
  - This changes the color of the next notification's background to the
  shown rgba color.
  Read more about it here: https://www.w3schools.com/cssref/func_rgba.asp

Patch Notes

You can use the following plugin commands to adjust how accessing the Patch
file is done for your game.

Plugin Commands

  OpenPatchNotes
  - This will open up the Patch file or URL for your game.

  ShowMenuPatchNotesCommand
  - Will make the 'PatchNotes' command show up in the main menu.

  HideMenuPatchNotesCommand
  - Will make the 'PatchNotes' command hidden in the main menu.

Party System

Here are some plugin commands you can use!

Plugin Command:
  OpenPartyMenu     Opens up the Party Menu from the field.

Actors can also be required, meaning the player must have that actor(s) in
the party before the player is able to leave the party menu. Required actors
can be moved around, unlike locked actors. Keep in mind if you do make some
actors required, do not make the game require more actors than the possible
maximum battle members or else the player will be stuck in the party menu.

Plugin Command:
  ShowBattleFormation    - Shows 'Formation' command in battle.
  HideBattleFormation    - Hides 'Formation' command in battle.
  EnableBattleFormation  - Enables 'Formation' command in battle.
  DisableBattleFormation - Disables 'Formation' command in battle.

  LockActor 3          - Locks actor 3.
  LockActor 4 5 6      - Locks actors 4, 5, and 6.
  UnlockActor 3        - Unlocks actor 3.
  UnlockActor 4 5 6    - Unlocks actors 4, 5, and 6.
                       * Locked Actors cannot be moved out of their current
                         position and must be in the party.

  RequireActor 3       - Player must have actor 3 in party.
  RequireActor 4 5 6   - Player must have actors 4, 5, and 6 in party.
  UnrequireActor 3     - Player no longer needs actor 3 in party.
  UnrequireActor 4 5 6 - Player no longer needs actors 4, 5, and 6 in party.
                       * Required Actors must be in the party in order for
                         the player to be able to exit the party menu.

  ChangePartyMax 5     - Changes max party size to 5.

Actor Party Switch

For those who'd like to be able to change the settings of Actor Part Switch
midway through the game, use the following plugin commands:

Plugin Commands:

  ShowActorPartySwitch
  HideActorPartySwitch
  - Shows/hides the 'Switch' command from the actor command window from
  being visible.

  EnableActorPartySwitch
  DisableActorPartySwitch
  - Enables/disables the 'Switch' command from the actor command window
  from being able to selected.

  ResetActorPartySwitchCooldowns
  - Resets all cooldowns for actor party switching.

Picture Common Events

The following are some plugin commands you can use should you want to add a
bit of control with the Picture Common Events.

Plugin Command

  EnableTouchMove
  DisableTouchMove
  - Allows the player to press a destination on the screen and move there or
  disables the player from using touch movement.

  HidePictureCommonEvents
  ShowPictureCommonEvents
  - Manually hide all pictures bound to common events or show them. If shown
  then pictures will return to their previous opacity value. Hidden pictures
  cannot be triggered to activate common events.

  MovePlayer Down
  MovePlayer Left
  MovePlayer Right
  MovePlayer Up
  - Will cause the player character to move as if moving by using a 4-dir
  input (either via keyboard or controller). This is best used with 'Press'.

  TriggerButton Ok
  TriggerButton Cancel
  TriggerButton Dash
  TriggerButton PageUp
  TriggerButton PageDown
  TriggerButton Left
  TriggerButton Up
  TriggerButton Right
  TriggerButton Down
  - This will cause the game to simulate triggering the button command of
  one of those original functions even if there is a common event bound to
  all of the keys of that original function.

Picture Spritesheets

Using the Plugin Command event, you can set a specific picture to change to
a different cell by using the Plugin Command below:

Plugin Commands:

  Picture x Frame y
  - Replace 'x' with the ID of the picture you wish to change the frame of.
  - Replace 'y' with the frame ID to change the picture to.

Proximity Compass

ShowCompass
HideCompass
ToggleCompass
- This will show, hide, or toggle the compass from view. If shown, this will
make the compass visible, unless the player opts to hide the compass or if
the map has a <Hide Compass> notetag.

PlayerCompassIcon x
- Changes the player's compass icon to x.

Quest Journal System

There are various plugin commands you can use to control the quest journal
system in your game.

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Plugin Commands:
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

  Quest Journal Open
  - Opens the quest journal system menu with no quest selected.

  Quest Journal Open To x
  - Replace 'x' with the quest ID you wish to open the quest journal system
  to. If the quest isn't known to the player at the time this plugin command
  takes place, then the quest will be added to the player's quest journal.

  ---

  Quest Journal Show
  Quest Journal Hide
  - Show or hide the Quest Journal option from the main menu.

  Quest Journal Enable
  Quest Journal Disable
  - Enable or disable the Quest Journal option in the main menu.

  ---

  Quest Add x
  - Replace 'x' with an integer. Adds quest ID 'x' to the quest journal as
  an available quest. This will make it viewable from the in-game quest
  journal system menu.

  Quest Add x to y
  - Replace 'x' and 'y' with integer values determining the quest ID range
  you wish to add in mass amounts to the quest journal.

  Quest Add x, x, x
  - Replace 'x' values with integer values representing the quest ID's you
  wish to add to the quest journal.

  ---

  Quest Remove x
  - Replace 'x' with an integer. This will remove quest ID 'x' from the
  quest journal.

  Quest Remove x to y
  - Replace 'x' and 'y' with integer values determining the quest ID range
  you wish to remove in mass amounts from the quest journal.

  Quest Remove x, x, x
  - Replace 'x' values with integer values representing the quest ID's you
  wish to remove from the quest journal.

  ---

  Quest Set Completed x
  Quest Set Failed x
  Quest Set Available x
  - Replace 'x' with the quest ID you wish to change the quest status to
  'completed', 'failed', or 'available'.

  Quest Set Completed x to y
  Quest Set Failed x to y
  Quest Set Available x to y
  - Replace 'x' and 'y' with integer values determining the quest ID range
  you wish to set as completed, failed, or available.

  Quest Set Completed x, x, x
  Quest Set Failed x, x, x
  Quest Set Available x, x, x
  - Replace 'x' values with integer values representing the quest ID's you
  wish to set as completed, failed, or available.

  ---

  Quest x Change Description Entry To y
  - Replace 'x' with the Quest ID you want to modify the description of.
  Replace 'y' with the description entry ID you wish to change the quest to.
  This will make the description, when viewed in-game in the quest journal,
  to display the description entry ID 'y' found in the plugin parameters for
  quest 'x'. This is used for times you wish to update the description text
  midway through a quest.

  ---

  Quest x Show Objective y
  Quest x Hide Objective y
  - Replace 'x' with the Quest ID you wish to alter the objective of.
  Replace 'y' with the objective ID you wish to make visible/hidden. Quests
  can show multiple objectives at once.

  Quest x Show Objective y to z
  Quest x Hide Objective y to z
  - Replace 'x' with the Quest ID you wish to alter the objective of.
  Replace 'y' and 'z' with the objective ID range you wish to make
  visible/hidden. Quests can show multiple objectives at once.

  Quest x Show Objective y, y, y
  Quest x Hide Objective y, y, y
  - Replace 'x' with the Quest ID you wish to alter the objective of.
  Replace 'y' values with integer values representing the objective ID's you
  wish to make visible/hidden. Quests can show multiple objectives at once.

  Quest X Show All Objectives
  Quest X Hide All Objectives
  - Replace 'x' with the Quest ID you wish to alter the objectives of.
  This will show/hide all of the quest's objectives.

  Quest x Complete Objective y
  Quest x Fail Objective y
  Quest x Normalize Objective y
  - Replace 'x' with the Quest ID you wish to alter the objective of.
  Replace 'y' with the objective ID you wish to change the status of.
  Using 'Complete' will mark the objective as completed. Using 'Fail' will
  mark the objective as failed. Using 'Normalize' will set the objective's
  status to neither completed or failed.

  Quest x Complete Objective y to z
  Quest x Fail Objective y to z
  Quest x Normalize Objective y to z
  - Replace 'x' with the Quest ID you wish to alter the objective of.
  Replace 'y' and 'z' with the objective ID range you wish to change the
  status of. Using 'Complete' will mark the objective as completed. Using
  'Fail' will mark the objective as failed. Using 'Normalize' will set the
  objective's status to neither completed or failed.

  Quest x Complete Objective y, y, y
  Quest x Fail Objective y, y, y
  Quest x Normalize Objective y, y, y
  - Replace 'x' with the Quest ID you wish to alter the objective of.
  Replace 'y' values with integer values representing the objective ID's you
  wish to change the status of. Using 'Complete' will mark the objective as
  completed. Using 'Fail' will mark the objective as failed. Using
  'Normalize' will set the objective's status to neither completed or
  failed.

  Quest x Complete All Objectives
  Quest x Fail All Objectives
  Quest x Normalize All Objectives
  - Replace 'x' with the Quest ID you wish to alter the objectives of.
  This will complete/fail/normalize all of the quest's objectives.

  ---

  Quest x Show Reward y
  Quest x Hide Reward y
  - Replace 'x' with the Quest ID you wish to alter the reward of. Replace
  'y' with the reward ID you wish to make visible/hidden. Quests can show
  multiple reward at once.

  Quest x Show Reward y to z
  Quest x Hide Reward y to z
  - Replace 'x' with the Quest ID you wish to alter the reward of. Replace
  'y' and 'z' with the reward ID range you wish to make visible/hidden.
  Quests can show multiple reward at once.

  Quest x Show Reward y, y, y
  Quest x Hide Reward y, y, y
  - Replace 'x' with the Quest ID you wish to alter the reward of. Replace
  'y' values with integer values representing the reward ID's you wish to
  make visible/hidden. Quests can show multiple reward at once.

  Quest x Show All Rewards
  Quest x Hide All Rewards
  - Replace 'x' with the Quest ID you wish to alter the rewards of. This
  will show/hide all of the quest's rewards.

  Quest x Claim Reward y
  Quest x Deny Reward y
  Quest x Normalize Reward y
  - Replace 'x' with the Quest ID you wish to alter the reward of. Replace
  'y' with the reward ID you wish to change the status of. Using 'Claim'
  will mark the reward as claimed. Using 'Deny' will mark the reward as
  denied. Using 'Normalize' will set the reward's status to neither claimed
  or denied.

  Quest x Claim Reward y to z
  Quest x Deny Reward y to z
  Quest x Normalize Reward y to z
  - Replace 'x' with the Quest ID you wish to alter the reward of. Replace
  'y' and 'z' with the reward ID range you wish to change the status of.
  Using 'Claim' will mark the reward as claimed. Using 'Deny' will mark the
  reward as denied. Using 'Normalize' will set the reward's status to
  neither claimed or denied.

  Quest x Claim Reward y, y, y
  Quest x Deny Reward y, y, y
  Quest x Normalize Reward y, y, y
  - Replace 'x' with the Quest ID you wish to alter the reward of. Replace
  'y' values with integer values representing the reward ID you wish to
  change the status of. Using 'Claim' will mark the reward as claimed. Using
  'Deny' will mark the reward as denied. Using 'Normalize' will set the
  reward's status to neither claimed or denied.

  Quest x Claim All Rewards
  Quest x Deny All Rewards
  Quest x Normalize All Rewards
  - Replace 'x' with the Quest ID you wish to alter the rewards of. This
  will claim/deny/normalize all of the quest's rewards.

  ---

  Quest x Change Subtext Entry To y
  - Replace 'x' with the Quest ID you want to modify the subtext of. Replace
  'y' with the subtext entry ID you wish to change the quest to. This will
  make the subtext, when viewed in-game in the quest journal, to display the
  subtext entry ID 'y' found in the plugin parameters for quest 'x'. This is
  used for times you wish to update the subtext text midway through a quest.

  ---

Map Quest Window

You can use the following plugin commands to change the behavior of the
Map Quest Window.

Plugin Commands:

  SetActiveQuest x
  - Sets the active quest to x.

  RefreshActiveQuestWindow
  - Refreshes the map quest window.

  ShowActiveQuestWindow
  HideActiveQuestWindow
  - Changes the Active Map Quest Window to be visible/hidden. This will not
  override the player's Options Menu's setting to hide the window.

Repel & Lure Encounters

For those who would like to adjust the lure rates and lure flat values
mid-game, you can use the following plugin commands.

Plugin Commands:

  SetLureRate x
  - Sets the lure rate for encounters to x when the Lure Variable is active.
  You can use JavaScript code for x if you are familiar with JavaScript.

  SetLureFlat x
  - Sets the flat value for encounters to x when the Lure Variable is active.
  You can use JavaScript code for x if you are familiar with JavaScript.

Row Formation

The following are some plugin commands you can use to adjust rows mid-game.

Plugin Command:

  ShowMenuRow
  HideMenuRow
  This will either show or hide the Row command from the main menu.

  EnableMenuRow
  DisableMenuRow
  This will either enable or disable the Row command from the main menu.

  ShowBattleRow
  HideBattleRow
  This will either show or hide the Row command from the battle party menu.
  This requires the YEP_BattleEngineCore plugin to take effect.

  EnableBattleRow
  DisableBattleRow
  This will either enable or disable the Row command from the battle party
  menu. This requires the YEP_BattleEngineCore plugin to take effect.

  SetActorRow actorId x
  This will set the actor represented by actorId to move to row x. If you
  want to move actor 3 to the 2nd row, the plugin command would look like:
  SetActorRow 3 2

  SetPartyRow slotId x
  This will set the party member in slotId to move to row x. If you want to
  move the 3rd party member to the 2nd row, the plugin command would look
  like: SetPartyRow 3 2

  SetEnemyRow slotId x
  This will set the enemy member in slotId to move to row x. If you want to
  move the 3rd enemy member to the 2nd row, the plugin command would look
  like: SetEnemyRow 3 2
  * Note: If you use this plugin command during turn 0 and the parameter
  'Adjust Relative' is set to false, the enemies will not move and
  automatically assume the position they are in will be the row they'll be
  in. On the other hand, using this plugin on anything after turn 0 will
  move the enemy visually to a different position on the screen. If the
  parameter 'Adjust Relative' is true, the enemies will move.

Save Core

Autosave

Autosave is manually done by the game developer using plugin commands. There
are also other plugin commands that can control autosaving, too.

  Plugin Commands:

     Autosave
     - This will make the game automatically save in the last saved file
     slot used by the player. If the player has started a new game and did
     not save into a slot yet, nothing will happen. If autosave is disabled
     by the player through the Options menu or disabled by the system with
     a plugin command, nothing will happen either.

     EnableAutosave
     DisableAutosave
     - This will forcibly enable or disable autosaving done by the game.
     This will not bypass the player's option to disable Autosave if trying
     to enable it. The player's decision to disable Autosaving will take
     priority over the game dev's. If you wish to take this option away from
     the player, please change it in the plugin parameters.

New Game+

To set the current save to have New Game+ settings, you'll need to use these
plugin commands to alter the settings:

Plugin Commands:

  EnableNewGamePlus
  - This will cause any save after this has been enabled to have a New Game+
  option instead of the "Load" command on the loading screen.

  DisableNewGamePlus
  - This will disable the New Game+ option for saves made after this plugin
  command has run. The "Load" option will appear instead of "New Game+".

Save Event Locations

Plugin Command
  ResetAllEventLocations
  - This resets all the event locations on the map.

Self Switches & Variables

Those who would like to remotely control Self Switches and Self Variables
can use the following plugin commands:

Plugin Commands:

  SelfSwitch Map x, Event y, Switch z to true
  SelfSwitch Map x, Event y, Switch z to false
  SelfSwitch Map x, Event y, Switch z to code
  - This will change the Self Switch used for map 'x', event 'y', and
  switch 'z' to the value of 'code' value. You can replace 'code' with a
  'true' or 'false' value or a piece of code like '$gameSwitches.value(4)'.

  SelfVariable Map x, Event y, Variable z to 12345
  SelfVariable Map x, Event y, Variable z to value + 100
  SelfVariable Map x, Event y, Variable z to code
  - This will change the Self Variable used for map 'x', event 'y', and
  switch 'z' to the value of 'code' value. You can replace 'code' with a
  number like '12345', a calculation using 'value' (the current value of the
  Self Variable), or a piece of code like '$gameVariables.value(4)'.

Skill Core

Party Limit Gauge

You can use plugin commands inside events to alter the amount of Party Limit
Gauge the player's party or enemy party has.

Plugin Command

  SetPartyLimitGaugeValue x
  SetTroopLimitGaugeValue x
  - Sets the player party's or enemy party's raw Party Limit Gauge
  value to x.

  GainPartyLimitGaugeValue x
  GainTroopLimitGaugeValue x
  - The player party's or enemy party's raw Party Limit Gauge gains
  x value.

  LosePartyLimitGaugeValue x
  LoseTroopLimitGaugeValue x
  - The player party's or enemy party's raw Party Limit Gauge gains
  x value.

  SetPartyLimitGaugeIncrement x
  SetTroopLimitGaugeIncrement x
  - Sets the player party's or enemy party's Party Limit Gauge value
  to x increments.

  GainPartyLimitGaugeIncrement x
  GainTroopLimitGaugeIncrement x
  - The player party's or enemy party's Party Limit Gauge gains
  x increments.

  LosePartyLimitGaugeIncrement x
  LoseTroopLimitGaugeIncrement x
  - The player party's or enemy party's Party Limit Gauge gains
  x increments.

  ShowPartyLimitGauge
  HidePartyLimitGauge
  ShowTroopLimitGauge
  HideTroopLimitGauge
  - Shows or hides the Party/Troop Limit Gauge.

Skill Learn System

You can use the following Plugin Commands from the Event Editor to alter
whether or not you want the 'Learn Skill' command to appear in the skill
scene or to have it enabled.

Plugin Command:
  ShowLearnSkill            Shows the 'Learn Skill' command.
  HideLearnSkill            Hides the 'Learn Skill' command.
  EnableLearnSkill          Enables the 'Learn Skill' command.
  DisableLearnSkill         Disables the 'Learn Skill' command.
  OpenLearnSkill actor x    Opens Learn Skill menu for actor x.
  OpenLearnSkill party x    Opens Learn Skill menu for party member x.

Stat Allocation

You can use the following plugin commands for various Stat Allocation
related effects in your game!

Plugin Commands:

  ShowStatAllocate
  HideStatAllocate
  - This will show or hide the main menu's Stat Allocation command.

  EnableStatAllocate
  DisableStatAllocate
  - This will enable or disable the main menu's Stat Allocation command.

  ShowRevertAllocate
  HideRevertAllocate
  - This will show or hide the Allocation scene's 'Revert' command.

  EnableRevertAllocate
  DisableRevertAllocate
  - This will enable or disable the Allocation scene's 'Revert' command.

  OpenStatAllocate x
  - This will open up the stat allocation menu for the party member whose
  index is equal to x. 0 is the first slot.

Status Menu Core

Actor Variables

These are plugin commands to allow you to hide/show specific variables
throughout your game.

Plugin Command:

HideActorVariable 1
Hides variable 1 from being shown in the actor status menu.

ShowActorVariable 2
Disables any hidden properties for variable 2 in the actor status menu.

Profile Status Page

The following plugin commands can be used to alter an actor's profile page.

Plugin Commands:

ClearProfileText actorId
This will clear out all of actorId's profile text.

AddProfileText actorId text
This will add to actorId's profile text the line of text.

ProfileTextLine lineIndex actorId text
This will change the specific lineIndex of the profile text for actorId to
display a specific text. For example, if you wish to the 50th line of the
profile text for actor 3 to 'Hello World', you'll write this out as the
plugin command:
ProfileTextLine 49 3 Hello World

ProfileImage actorId filename
This will change the profile image for actorId to filename without the file
extension. For example, if you wish to change actor 3's profile image to
Aldo.png, you'll write out this as the plugin command:
ProfileImage 3 Aldo

ProfileImageAlign actorId align
This will change the profile image alignment for actorId. Replace 'align'
with 'left', 'center', or 'right' without the quotes. If a nonexistant word
is used for the alignment, then the right alignment will be used. If you
wish to make the image aligned to the left for actor 3, you'll use:
ProfileImageAlign 3 Left

Stop Map Movement

You can use the following plugin commands to produce the following effects:

Plugin Command

  StopEventMovement
  Stops events from automatically moving by themselves. You can still move
  events through movement routes set by your active event.

  AllowEventMovement
  Allows events to move automatically by themselves again. If you have any
  of the plugin parameters disabling events from moving during either events
  or messages, this will not bypass it.

  StopPlayerMovement
  Stops player from being able to move via input. You can still move the
  player through movement routes set by your active event.

  AllowPlayerMovement
  Allows player to move again via input.

Tool Ring System

Open Tool Ring
- Opens up the tool ring forcefully.

Victory Aftermath

If you wish to alter the Victory Aftermath sequence a bit, you can use the
following Plugin Commands.

Plugin Commands:
  DisableVictoryAftermath   - Disables the Victory Aftermath sequence and
                              bypasses the Victory Aftermath music, too.
  EnableVictoryAftermath    - Enables the Victory Aftermath sequence if
                              it has been previously disabled.
  DisableVictoryMusic       - Disables the Victory Aftermath music to just
                              continue playing whatever was playing.
  EnableVictoryMusic        - Enables the Victory Aftermath music if it has
                              been previously disabled.

Aftermath Level Up

You can use these plugin commands to adjust whether or not the Level Up
portion of the Victory Aftermath will occur.

Plugin Command:

  ShowVictoryLevelUp
  This will cause the level up segment of the Victory Aftermath to appear if
  there is an actor that leveled up in the current battle.

  HideVictoryLevelUp
  This will cause the level up segment of the Victory Aftermath to not
  appear at all regardless of any actors leveling up in that battle.

Victory Sequence UI

If you want to turn on or off the victory sequence or the music, use these plugin commands:

EnableVictoryAftermath
DisableVictoryAftermath
This turns on or off the victory sequence. This one matches Yanfly's plugin
command so you don't have to change your game's plugin command call if you
are switching over.

EnableVictoryMusic
DisableVictoryMusic
This turns on or off the victory BGM and ME. This one matches Yanfly's
plugin command so you don't have to change your game's plugin command call
if you are switching over.

Weather In Battle

Plugin Commands:

  SaveWeather
  - Saves the current weather settings, meaning the type, power, and
  duration to change will be saved.

  RecallWeather
  - Recalls the last saved weather settings. If nothing was last saved,
  then nothing will happen. Using this plugin command will not remove the
  last saved weather settings from memory.

@@ Line 244: / Line 244: @@
 <html><img src='https://img.itch.zone/aW1nLzE5ODYwNDEuZ2lm/original/SB52LR.gif'></html>
-<pre?
+<pre>
 BrightEffects Godray Show
 BrightEffects Godray Hide
@@ Line 939: / Line 939: @@
 </nowiki>
-== [[Enemy Levels (YEP)|Enemy Levels]] ==
+== [[Dragonbones Event Pictures (Irina)|Dragonbones Event Pictures]] ==
+Insert these for your Plugin Commands to control the Dragonbones armature
+attached to pictures.
- <nowiki>
+<hr>
-If you wish to change enemy levels through plugin commands, you can use the
-following plugin commands to alter them. These plugin commands are only used
-inside battle.
-Plugin Command:
+<html><img src='https://img.itch.zone/aW1nLzI5MDc4NTQuZ2lm/original/7oyVDF.gif'></html>
-  EnemyLevelChange 2 to 50
+<pre>
-  - This will reset the enemy in position 2's level to 50.
+Picture ID Dragonbones: filename
-  EnemyLevelChangeAll 50
+   -Replace 'ID' with the picture ID you want to attach a
-   - This will change the levels of all enemies to 50.
+   Dragonbones armature to.
-  EnemyGainLevel 3 by 20
+   -Replace 'filename' with the base filename of the Dragonbones armature.
-   - This will cause the enemy in positon 3 to gain 20 levels.
-  EnemyGainLevelAll 20
+   -If no picture is already shown, one will be created and centered at the
-   - This will cause all enemies to gain 20 levels.
+   middle of the screen.
-  EnemyLoseLevel 4 by 10
+   -When a Dragonbones armature comes out, it will play the "Idle" animation
-   - This will cause the enemy in positon 4 to lose 10 levels.
+   by default if there is one (so please make your Dragonbones armatures
+   with this in mind).
+</pre>
-  EnemyLoseLevelAll 10
+<hr>
-  - This will cause all enemies to lose 10 levels.
-  EnemyLevelReset 5
+<html><img src='https://img.itch.zone/aW1nLzI5MDc4NzcuZ2lm/original/JdWTCe.gif'></html>
-  - This will reset the enemy in position 5's level to the level it had at
-  the start of battle.
-  EnemyLevelResetAll
+<pre>
-  - This will reset all enemy levels to their original levels.
+Picture ID Dragonbones Animation: animationName
-</nowiki>
-=== [[Difficulty Slider (YEP)|Difficulty Slider]] ===
+  -Replace 'ID' with the picture ID you want to play an animation on.
-<hr>
- <nowiki>
+  -Replace 'animationName' with the animation name used for the armature.
-For those who wish to show/hide the Difficulty Slider from the options menu
+</pre>
-midway through the game, you can control it using these plugin commands:
-Plugin Commands:
+<hr>
-  ShowDifficultySlider
+<html><img src='https://img.itch.zone/aW1nLzI5MDc4NjcuZ2lm/original/sw7Csa.gif'></html>
-  - This will show the Difficulty Slider and enable it making it apply to
-  all enemies in the game that do not have an unaffected notetag.
-  HideDifficultySlider
+<pre>
-  - This will hide the Difficulty Slider and also disable the slider's
+Picture ID Dragonbones Scale X: value
-  effects on enemy levels in the game.
+Picture ID Dragonbones Scale Y: value
-</nowiki>
-== [[Enhanced TP (YEP)|Enhanced TP]] ==
+  -Replace 'ID' with the picture ID you want to change the base
+   Dragonbones armature scale of.
- <nowiki>
+  -Replace 'value' with a float value depicting the rate.
-You can use the following Plugin Commands to alter Enhanced TP.
+   This is amplified by the picture's scale value.
+</pre>
-Plugin Command:
+<hr>
-  ShowTpMode
+== [[Dragonbones Map Sprites (Irina)|Dragonbones Map Sprites]] ==
-  HideTpMode
-  This will show/hide the TP Mode from the Skill Menu.
-  EnableTpMode
+Insert these for your Plugin Commands to control the Dragonbones armature
-  DisableTpMode
+attached to a map sprite.
-  This will enable/disable the TP Mode in the Skill Menu.
-  ChangeTpMode Actor 1 to 5
+<hr>
-  This will change the TP mode of Actor 1 to TP Mode 5.
-  ChangeTpMode Party 2 to 6
+<html><img src='https://img.itch.zone/aW1nLzI5MjM2MzEuZ2lm/original/n9Q%2B8%2F.gif'></html>
-  This will change the TP mode of Party Member 2 to TP Mode 6.
-  UnlockTpMode Actor 3 Mode 7
+<pre>
-  This will make Actor 3 unlock TP Mode 7.
+Actor id Dragonbones Sprite Animation: animation
+Event id Dragonbones Sprite Animation: animation
+Party index Dragonbones Sprite Animation: animation
-   UnlockTpMode Party 4 Mode 8
+   - Replace 'id' with the ID of the actor/event to target.
-   This will make Party Member 4 unlock TP Mode 8.
+   - Replace 'index' with the index of the party member to target.
+  - Replace 'animation' with the Dragonbones animation name to play.
+    - Note: Case sensitive.
+    - Replace 'animation' with "Clear Animation" to clear it.
+</pre>
-  RemoveTpMode Actor 1 Mode 9
+<hr>
-  This will make Actor 1 remove TP Mode 9.
-  RemoveTpMode Party 2 Mode 10
+You can change the Dragonbones map sprite properties of actors permanently
-  This will make Party Member 2 remove TP Mode 10.
+by using the following plugin commands.
-  UnlockAllTpModes Actor 1
+<hr>
-  This will make Actor 1 unlock all TP modes.
-  UnlockAllTpModes Party 2
+<pre>
-  This will make Party member 2 unlock all TP modes.
+Actor id Dragonbones Sprite Filename: filename
+Party index Dragonbones Sprite Filename: filename
-   RemoveAllTpModes Actor 1
+   - Replace 'id' with the ID of the actor/event to target.
-   This will make Actor 1 remove all TP modes.
+  - Replace 'index' with the index of the party member to target.
+   - Replace 'filename' with the Dragonbones Armature's name.
+    - Note: Case sensitive.
+</pre>
-  RemoveAllTpModes Party 2
+<hr>
-  This will make Party member 2 remove all TP modes.
-</nowiki>
-== [[Equip Battle Skills (YEP)|Equip Battle Skills]] ==
+<pre>
+Actor id Dragonbones Sprite Scale: x, y
+Party index Dragonbones Sprite Scale: x, y
- <nowiki>
+  - Replace 'id' with the ID of the actor to target.
-You can use the following plugin commands to increase or decrease the amount
+  - Replace 'index' with the index of the party member to target.
-of battle slots for specific actors.
+  - Replace 'x' and 'y' with the amount to scale the sprite by.
+</pre>
-Plugin Command:
+<hr>
-  IncreaseActorBattleSlots 3 by 4
+<pre>
-  - This will increase actor 3's number of battle skill slots by 4. The
+Actor id Dragonbones Sprite Speed: x
-  total amount of battle skill slots cannot go beyond the 'Maximum Skills'
+Party index Dragonbones Sprite Speed: x
-  plugin parameter.
-   DecreaseActorBattleSlots 5 by 2
+   - Replace 'id' with the ID of the actor to target.
-   - This will decrease actor 5's number of battle skill slots by 2. The
+   - Replace 'index' with the index of the party member to target.
-   total amount of battle skill slots cannot go beneath 1.
+   - Replace 'x' with the base speed of the animation.
-</nowiki>
+    - 1 is normal speed.
+</pre>
- <nowiki>
+<hr>
-Here are some plugin commands you can use for your game!
-Plugin Command:
+<pre>
+Actor id Dragonbones Sprite Size: width, height
+Party index Dragonbones Sprite Size: width, height
-   EnableEquipBattleSkills
+   - Replace 'id' with the ID of the actor to target.
-   - This will enable the 'Equip Skills' command in the skill menu.
+   - Replace 'index' with the index of the party member to target.
+  - Replace 'width' and 'height' with values to determine the sprite's size.
+  - Dragonbones armatures don't use width and height but other plugins do.
+</pre>
-  DisableEquipBattleSkills
+<hr>
-  - This will disable the 'Equip Skills' command in the skill menu.
-  ShowEquipBattleSkills
+<pre>
-  - This will show the 'Equip Skills' command in the skill menu.
+Actor id Dragonbones Sprite Flip Left: true
+Actor id Dragonbones Sprite Flip Left: false
+Actor id Dragonbones Sprite Flip Right: true
+Actor id Dragonbones Sprite Flip Right: false
-  HideEquipBattleSkills
+Party index Dragonbones Sprite Flip Left: true
-  - This will hide the 'Equip Skills' command in the skill menu.
+Party index Dragonbones Sprite Flip Left: false
-</nowiki>
+Party index Dragonbones Sprite Flip Right: true
+Party index Dragonbones Sprite Flip Right: false
-== [[Equip Core (YEP)|Equip Core]] ==
+  - Replace 'id' with the ID of the actor to target.
+  - Replace 'index' with the index of the party member to target.
+  - Turns 'Flip Left' or 'Flip Right' on/off.
+</pre>
-=== [[Equip Customize Command (YEP)|Equip Customize Command]] ===
 <hr>
- <nowiki>
+<pre>
-There's a couple of plugin commands you can use with this plugin.
+Actor id Dragonbones Motion type: animation
+Party index Dragonbones Motion type: animation
-Plugin Command:
+  - Replace 'id' with the ID of the actor to target.
+  - Replace 'index' with the index of the party member to target.
+  - Replace 'type' with any of the following:
+    - Idle
+    - Walk
+    - Dash
+    - Jump
+    - Ladder Idle
+    - Ladder Climb
+  - Replace 'animation' with the Dragonbones animation name to use for that
+    specific motion type. This is case sensitive.
+</pre>
-  ShowEquipCustomize
+<hr>
-  - This will show the 'Customize' command in the equip menu.
-  HideEquipCustomize
+== [[Enemy Levels (YEP)|Enemy Levels]] ==
-  - This will hide the 'Customize' command in the equip menu.
-</nowiki>
-== [[Event Chase Player (YEP)|Event Chase Player]] ==
-=== [[Event Chase Stealth (YEP)|Event Chase Stealth]] ===
-<hr>
   <nowiki>
-You can use the following Plugin Commands to adjust Stealth Mode in your
+If you wish to change enemy levels through plugin commands, you can use the
-game mid-game!
+following plugin commands to alter them. These plugin commands are only used
+inside battle.
 Plugin Command:
-   StealthTime x
+   EnemyLevelChange 2 to 50
-   - Puts the player character into Stealth Mode for x frames. Once the
+   - This will reset the enemy in position 2's level to 50.
-  timer is up, the player exits Stealth Mode.
-   StealthMode On
+   EnemyLevelChangeAll 50
-   - Puts the player character into Stealth Mode. There is no timer for this.
+   - This will change the levels of all enemies to 50.
-   StealthMode Off
+   EnemyGainLevel 3 by 20
-   - Puts the player character out of Stealth Mode. This also resets the
+   - This will cause the enemy in positon 3 to gain 20 levels.
-  Stealth Timer to 0.
-   EnableStealthDash
+   EnemyGainLevelAll 20
-   - Enables the player to be able to dash while in Stealth Mode.
+   - This will cause all enemies to gain 20 levels.
-   DisableStealthDash
+   EnemyLoseLevel 4 by 10
-   - Disables the player from being able to dash while in Stealth Mode.
+   - This will cause the enemy in positon 4 to lose 10 levels.
-   SetStealthMoveSpeed x
+   EnemyLoseLevelAll 10
-   - Sets the move speed while in Stealth Mode to x.
+   - This will cause all enemies to lose 10 levels.
-   HideStealthGauge
+   EnemyLevelReset 5
-   - This prevents the Stealth Gauge from being shown at all.
+   - This will reset the enemy in position 5's level to the level it had at
+  the start of battle.
-   ShowStealthGauge
+   EnemyLevelResetAll
-   - This will show the Stealth Gauge whenever the player is in Stealth Mode.
+   - This will reset all enemy levels to their original levels.
-  EnableDifferentStealthSpeed
-  - Sets the player to have a different move speed when in Stealth Mode.
-  DisableDifferentStealthSpeed
-  - The player won't have a different move speed when in Stealth Mode.
 </nowiki>
-== [[Event Mini Label (YEP)|Event Mini Label]] ==
+=== [[Difficulty Slider (YEP)|Difficulty Slider]] ===
+<hr>
   <nowiki>
-If you would like to shut off the Event Mini Label mid-game or turn it on,
+For those who wish to show/hide the Difficulty Slider from the options menu
-you can use the following plugin commands:
+midway through the game, you can control it using these plugin commands:
-Plugin Command:
+Plugin Commands:
-   HideMiniLabel
+   ShowDifficultySlider
-   Hides all Event Mini Label.
+  - This will show the Difficulty Slider and enable it making it apply to
+   all enemies in the game that do not have an unaffected notetag.
-   ShowMiniLabel
+   HideDifficultySlider
-   Shows all Event Mini Label.
+   - This will hide the Difficulty Slider and also disable the slider's
+   effects on enemy levels in the game.
-  RefreshMiniLabel
-   Refreshes all Event Mini Labels on the map.
 </nowiki>
-== [[Event Timer Control (YEP)|Event Timer Control]] ==
+== [[Enhanced TP (YEP)|Enhanced TP]] ==
   <nowiki>
-Use the following plugin commands to make use of the new features added by
+You can use the following Plugin Commands to alter Enhanced TP.
-this plugin to control the event timer.
-Plugin Commands:
+Plugin Command:
-   --- PAUSE/RESUME ---
+   ShowTpMode
+  HideTpMode
+  This will show/hide the TP Mode from the Skill Menu.
-   EventTimer Pause
+   EnableTpMode
-   - Pauses the event timer.
+   DisableTpMode
+  This will enable/disable the TP Mode in the Skill Menu.
-   EventTimer Resume
+   ChangeTpMode Actor 1 to 5
-   - Resumes the event timer if it has been paused.
+   This will change the TP mode of Actor 1 to TP Mode 5.
-   --- COUNT DOWN/UP ---
+   ChangeTpMode Party 2 to 6
+  This will change the TP mode of Party Member 2 to TP Mode 6.
-   EventTimer Countdown
+   UnlockTpMode Actor 3 Mode 7
-   - Changes the direction of the event timer to decrease and count down
+   This will make Actor 3 unlock TP Mode 7.
-  towards 0 seconds.
-   EventTimer Count Up
+   UnlockTpMode Party 4 Mode 8
-   - Changes the direction of the event timer to increase and count upwards
+   This will make Party Member 4 unlock TP Mode 8.
-  endlessly until manually stopped
-   EventTimer Count Toggle
+   RemoveTpMode Actor 1 Mode 9
-   - Switches the current direction of the event timer to either increase or
+   This will make Actor 1 remove TP Mode 9.
-  decrease each second it is active.
-   --- INCREASE/DECREASE ---
+   RemoveTpMode Party 2 Mode 10
+  This will make Party Member 2 remove TP Mode 10.
-   EventTimer Increase x Frames
+   UnlockAllTpModes Actor 1
-   EventTimer Decrease x Frames
+   This will make Actor 1 unlock all TP modes.
-  - Replace 'x' with a number value to determine how many frames to
-  increase or decrease the event timer by.
-   EventTimer Increase x Seconds
+   UnlockAllTpModes Party 2
-   EventTimer Decrease x Seconds
+   This will make Party member 2 unlock all TP modes.
-  - Replace 'x' with a number value to determine how many seconds to
-  increase or decrease the event timer by.
-   EventTimer Increase x Minutes
+   RemoveAllTpModes Actor 1
-   EventTimer Decrease x Minutes
+   This will make Actor 1 remove all TP modes.
-  - Replace 'x' with a number value to determine how many minutes to
-  increase or decrease the event timer by.
-   EventTimer Increase x Hours
+   RemoveAllTpModes Party 2
-   EventTimer Decrease x Hours
+   This will make Party member 2 remove all TP modes.
-  - Replace 'x' with a number value to determine how many hours to
-  increase or decrease the event timer by.
-  You can also combine them together as such:
-  EventTimer Increase x Hours, y Seconds
-  EventTimer Increase x Hours, y Minutes
-  EventTimer Increase x Minutes, y Seconds
-  EventTimer Increase x Hours, y Minutes, z Seconds
 </nowiki>
-== [[External Links (YEP)|External Links]] ==
+== [[Equip Battle Skills (YEP)|Equip Battle Skills]] ==
   <nowiki>
-If you wish to send players to other links, you can use the following
+You can use the following plugin commands to increase or decrease the amount
-plugin commands.
+of battle slots for specific actors.
+Plugin Command:
-Plugin Command
+  IncreaseActorBattleSlots 3 by 4
-   OpenNewTab http://www.google.com/     Opens link in a new tab.
+   - This will increase actor 3's number of battle skill slots by 4. The
-   OpenNewWindow http://www.google.com/  Opens link in a new window.
+  total amount of battle skill slots cannot go beyond the 'Maximum Skills'
+   plugin parameter.
-Some web browsers may not differentiate these commands too much.
+  DecreaseActorBattleSlots 5 by 2
+  - This will decrease actor 5's number of battle skill slots by 2. The
+  total amount of battle skill slots cannot go beneath 1.
 </nowiki>
-== [[Footstep Sounds (YEP)|Footstep Sounds]] ==
+ <nowiki>
+Here are some plugin commands you can use for your game!
- <nowiki>
+Plugin Command:
-If at any time you wish to enable/disable footstep sounds in your game, you
-can use some plugin commands to do so.
+  EnableEquipBattleSkills
+  - This will enable the 'Equip Skills' command in the skill menu.
-Plugin Commands:
+  DisableEquipBattleSkills
+  - This will disable the 'Equip Skills' command in the skill menu.
-   EnableFootsteps
+   ShowEquipBattleSkills
-   - Turns on footstep sounds.
+   - This will show the 'Equip Skills' command in the skill menu.
-   DisableFootsteps
+   HideEquipBattleSkills
-   - Turns off footstep sounds.
+   - This will hide the 'Equip Skills' command in the skill menu.
 </nowiki>
-== [[Force Advantage (YEP)|Force Advantage]] ==
+== [[Equip Core (YEP)|Equip Core]] ==
+=== [[Equip Customize Command (YEP)|Equip Customize Command]] ===
+<hr>
   <nowiki>
-Use the following plugin commands to force a battle advantage on the next
+There's a couple of plugin commands you can use with this plugin.
-upcoming battle:
 Plugin Command:
-   ForceAdvantage Pre-Emptive
+   ShowEquipCustomize
-  ForceAdvantage Preemptive
+   - This will show the 'Customize' command in the equip menu.
-  ForceAdvantage First Strike
-  ForceAdvantage Player
-   - Forces a pre-emptive strike giving the player the advantage.
-   ForceAdvantage Surprise
+   HideEquipCustomize
-  ForceAdvantage Back Attack
+   - This will hide the 'Customize' command in the equip menu.
-  ForceAdvantage Enemy
+</nowiki>
-   - Forces a surprise attack giving the enemy party the advantage.
-  ForceAdvantage None
+== [[Event Chase Player (YEP)|Event Chase Player]] ==
-  ForceAdvantage Normal
-  ForceAdvantage Neutral
-  - Forces a neutral advantage where neither party has the advantage.
-  ForceAdvantage Clear
+=== [[Event Chase Stealth (YEP)|Event Chase Stealth]] ===
-  - Clears any forced advantage settings imposed by the above commands.
+<hr>
-</nowiki>
-== [[Gab Window (YEP)|Gab Window]] ==
   <nowiki>
-Using the Gab Window is quite simple. By default, it can be used in either
+You can use the following Plugin Commands to adjust Stealth Mode in your
-the map scene or the battle scene. To call upon it, you will to use a few
+game mid-game!
-Plugin Commands to set up what you wish for the Gab Window to display.
-Plugin Commands:
+Plugin Command:
---- Setup Commands ---
+  StealthTime x
+  - Puts the player character into Stealth Mode for x frames. Once the
+  timer is up, the player exits Stealth Mode.
-GabText text
+  StealthMode On
-This will set the gab window to type out the above text. Text codes can be
+  - Puts the player character into Stealth Mode. There is no timer for this.
-used for the Gab Window.
-GabFaceName filename
+  StealthMode Off
-If you wish to display a face graphic, use this plugin command to have it
+  - Puts the player character out of Stealth Mode. This also resets the
-display a face from the filename.
+  Stealth Timer to 0.
-GabFaceIndex x
+  EnableStealthDash
-Used in combination with the above plugin command to define which index the
+  - Enables the player to be able to dash while in Stealth Mode.
-face will use.
-GabSpriteName filename
+  DisableStealthDash
-If you wish to display a particular character sprite, use this plugin
+  - Disables the player from being able to dash while in Stealth Mode.
-command to have it display a sprite from the filename.
-GabSpriteIndex x
+  SetStealthMoveSpeed x
-Used in combination with the above plugin command to define which index the
+  - Sets the move speed while in Stealth Mode to x.
-sprite will use.
-GabActor x
+  HideStealthGauge
-GabActorFace x
+  - This prevents the Stealth Gauge from being shown at all.
-This will display actor x's face graphic where x is the actor's ID.
-GabActorSprite x
+  ShowStealthGauge
-This will display actor x's sprite graphic where x is the actor's ID.
+  - This will show the Stealth Gauge whenever the player is in Stealth Mode.
-GabParty x
+  EnableDifferentStealthSpeed
-GabPartyFace x
+  - Sets the player to have a different move speed when in Stealth Mode.
-This will display party member x's face graphic where x is the position.
-GabPartySprite x
+  DisableDifferentStealthSpeed
-This will display party member x's sprite graphic where x is the position.
+  - The player won't have a different move speed when in Stealth Mode.
+</nowiki>
-GabSound filename
+== [[Event Mini Label (YEP)|Event Mini Label]] ==
-This will play a sound from the SE folder under that particular filename.
-GabSwitch x
+ <nowiki>
-This will enable switch x when this gab finishes playing.
+If you would like to shut off the Event Mini Label mid-game or turn it on,
+you can use the following plugin commands:
-WaitForGab
+Plugin Command:
-Causes the game to wait until all gabs are finished playing.
---- Display Commands ---
+  HideMiniLabel
+  Hides all Event Mini Label.
-ShowGab
+  ShowMiniLabel
-Once the above settings are complete, use this Plugin Command to launch the
+  Shows all Event Mini Label.
-Gab Window and display the above data. This will put the gab data into a
-queue which means if there's another gab playing, this will be next in line.
-*Note If multiple ShowGabs are used, they will be queued up. The current
+  RefreshMiniLabel
-playing gab will finish playing before moving onto the next. If it so
+  Refreshes all Event Mini Labels on the map.
-happens that the inputted Gab would have the same exact settings as a
+</nowiki>
-previously loaded gab within the same queue, it will not be inserted to
-prevent any redundancy amongst the conversation.
-ForceGab
+== [[Event Timer Control (YEP)|Event Timer Control]] ==
-Once the above settings are complete, use this Plugin Command to clear all
-the other gabs in the Gab Window and display the above data.
-ClearGab
-This clears out the Gab Window of the current gab and any gabs queued.
-</nowiki>
-== [[Help File Access (YEP)|Help File Access]] ==
   <nowiki>
-You can use the following plugin commands to adjust how accessing the help
+Use the following plugin commands to make use of the new features added by
-file is done for your game.
+this plugin to control the event timer.
-Plugin Commands
+Plugin Commands:
-  OpenHelp
+   --- PAUSE/RESUME ---
-   - This will open up the help file or URL for your game.
-   ShowMenuHelpCommand
+   EventTimer Pause
-   - Will make the 'Help' command show up in the main menu.
+   - Pauses the event timer.
-   HideMenuHelpCommand
+   EventTimer Resume
-   - Will make the 'Help' command hidden in the main menu.
+   - Resumes the event timer if it has been paused.
-</nowiki>
-== [[Horror Effects (Olivia)|Horror Effects]] ==
+  --- COUNT DOWN/UP ---
-<html><img src='https://img.itch.zone/aW1hZ2UvMzI0NDQyLzE2MDM2MDIuZ2lm/original/11Kxzx.gif'></html>
+  EventTimer Countdown
+  - Changes the direction of the event timer to decrease and count down
+  towards 0 seconds.
-To apply horror effects to your game, use these plugin commands in the
+  EventTimer Count Up
-following format:
+  - Changes the direction of the event timer to increase and count upwards
+  endlessly until manually stopped
-; Main
+  EventTimer Count Toggle
+  - Switches the current direction of the event timer to either increase or
+  decrease each second it is active.
-<pre>
+  --- INCREASE/DECREASE ---
-HorrorEffects target Create Noise
-HorrorEffects target Create Glitch
-HorrorEffects target Create TV
-- Replace 'target' with a compatible effect target. This will create a horror
-noise, glitch, or TV effect on the sprite.
-HorrorEffects target Remove Noise
+  EventTimer Increase x Frames
-HorrorEffects target Remove Glitch
+  EventTimer Decrease x Frames
-HorrorEffects target Remove TV
+  - Replace 'x' with a number value to determine how many frames to
-- Replace 'target' with a compatible effect target. This will remove the
+  increase or decrease the event timer by.
-currently existing horror noise, glitch, or TV effect on the sprite.
-HorrorEffects target Clear
+  EventTimer Increase x Seconds
-- Replace 'target' with a compatible effect target. This will remove all
+  EventTimer Decrease x Seconds
-noise, glitch, or TV effects from the sprite.
+  - Replace 'x' with a number value to determine how many seconds to
+  increase or decrease the event timer by.
-HorrorEffects target Change Noise Rate x
+  EventTimer Increase x Minutes
-- Replace 'target' with a compatible effect target. Replace 'x' with a number
+  EventTimer Decrease x Minutes
-value. The higher the number value, the more noise there is. The lower the
+  - Replace 'x' with a number value to determine how many minutes to
-number value, the less noise there is. This can be a decimal value.
+  increase or decrease the event timer by.
-HorrorEffects target Change Noise Animated true
+  EventTimer Increase x Hours
-HorrorEffects target Change Noise Animated false
+  EventTimer Decrease x Hours
-- Replace 'target' with a compatible effect target. This will animate the
+  - Replace 'x' with a number value to determine how many hours to
-horror noise if true is used and stop animating the horror noise if false
+  increase or decrease the event timer by.
-is used instead.
-HorrorEffects target Change Glitch Max x
+  You can also combine them together as such:
-- Replace 'target' with a compatible effect target. This will set the maximum
-number of glitch slices to x.
-HorrorEffects target Change Glitch Min x
+  EventTimer Increase x Hours, y Seconds
-- Replace 'target' with a compatible effect target. This will set the minimum
+  EventTimer Increase x Hours, y Minutes
-number of glitch slices to x.
+  EventTimer Increase x Minutes, y Seconds
+  EventTimer Increase x Hours, y Minutes, z Seconds
+</nowiki>
-HorrorEffects target Change Glitch Slice x
+== [[External Links (YEP)|External Links]] ==
-- Replace 'target' with a compatible effect target. This will set the maximum
-and minimum number of glitch slices to x.
-HorrorEffects target Change Glitch Offset x
+ <nowiki>
-- Replace 'target' with a compatible effect target. This will set the glitch
+If you wish to send players to other links, you can use the following
-offset (how wild it goes) to x. The higher the number, the further the glitch
+plugin commands.
-can go. The lower the number, the closer to the base image it goes.
-HorrorEffects target Change Glitch Animated true
+Plugin Command
-HorrorEffects target Change Glitch Animated false
+  OpenNewTab http://www.google.com/     Opens link in a new tab.
-- Replace 'target' with a compatible effect target. This will animate (true)
+  OpenNewWindow http://www.google.com/  Opens link in a new window.
-or remove the animation (false) of the glitch effect.
-HorrorEffects target Change Glitch Frequency x
+Some web browsers may not differentiate these commands too much.
-- Replace 'target' with a compatible effect target. If animated, this will
+</nowiki>
-set the glitch frequency to x frames.
-HorrorEffects target Change Glitch Strength x
+== [[Footstep Sounds (YEP)|Footstep Sounds]] ==
-- Replace 'target' with a compatible effect target. If animated, this will
-set the glitch strength to x. The higher the number, the stronger the glitch
-effect will last. The lower the number, the weaker the effect.
-HorrorEffects target Change Glitch Refresh
+ <nowiki>
-- Replace 'target' with a compatible effect target. Refreshes the current
+If at any time you wish to enable/disable footstep sounds in your game, you
-glitched slices for a different setting.
+can use some plugin commands to do so.
-HorrorEffects target Change TV Thickness x
+Plugin Commands:
-- Replace 'target' with a compatible effect target. This will change the
-line thickness of the TV effect. Larger numbers mean thicker lines.
-HorrorEffects target Change TV Corner x
+  EnableFootsteps
-- Replace 'target' with a compatible effect target. This will change the
+  - Turns on footstep sounds.
-corner size. Use a value between 0 and 1. The larger the number, the larger
-the corners will be.
-HorrorEffects target Change TV Animated true
+  DisableFootsteps
-HorrorEffects target Change TV Animated false
+  - Turns off footstep sounds.
-- Replace 'target' with a compatible effect target. true will turn the TV
+</nowiki>
-effect on. false will turn the TV effect off.
-HorrorEffects target Change TV Speed x
+== [[Force Advantage (YEP)|Force Advantage]] ==
-- Replace 'target' with a compatible effect target. This will change the
-speed at which the TV animates.
-</pre>
-; Targets
+ <nowiki>
+Use the following plugin commands to force a battle advantage on the next
+upcoming battle:
-<pre>
+Plugin Command:
-These are things you can replace 'target' with:
-Screen
+  ForceAdvantage Pre-Emptive
-- Target becomes the visible map
+  ForceAdvantage Preemptive
+  ForceAdvantage First Strike
+  ForceAdvantage Player
+  - Forces a pre-emptive strike giving the player the advantage.
-Battle
+  ForceAdvantage Surprise
-- Target becomes the battle screen
+  ForceAdvantage Back Attack
+  ForceAdvantage Enemy
+  - Forces a surprise attack giving the enemy party the advantage.
-Player
+  ForceAdvantage None
-- Target becomes the first party member
+  ForceAdvantage Normal
+  ForceAdvantage Neutral
+  - Forces a neutral advantage where neither party has the advantage.
-Follower x
+  ForceAdvantage Clear
-- Target becomes the party member with slot x
+  - Clears any forced advantage settings imposed by the above commands.
+</nowiki>
-Event x
+== [[Gab Window (YEP)|Gab Window]] ==
-- Target becomes the map event with ID x
-Picture x
+ <nowiki>
-- Target becomes the picture with ID x
+Using the Gab Window is quite simple. By default, it can be used in either
+the map scene or the battle scene. To call upon it, you will to use a few
+Plugin Commands to set up what you wish for the Gab Window to display.
-Actor x
+Plugin Commands:
-- Target becomes the actor with ID x
-Party x
+--- Setup Commands ---
-- Target becomes the party member with slot x
-Enemy x
+GabText text
-- Target becomes the battle enemy with index x
+This will set the gab window to type out the above text. Text codes can be
-</pre>
+used for the Gab Window.
-== [[Icon Balloons (YEP)|Icon Balloons]] ==
+GabFaceName filename
+If you wish to display a face graphic, use this plugin command to have it
+display a face from the filename.
- <nowiki>
+GabFaceIndex x
-Use these plugin commands to get icon balloons playing on the player/events.
+Used in combination with the above plugin command to define which index the
+face will use.
+GabSpriteName filename
+If you wish to display a particular character sprite, use this plugin
+command to have it display a sprite from the filename.
-Plugin Commands
+GabSpriteIndex x
+Used in combination with the above plugin command to define which index the
+sprite will use.
-  ---
+GabActor x
+GabActorFace x
+This will display actor x's face graphic where x is the actor's ID.
-  ShowIconBalloon x on Player
+GabActorSprite x
-  ShowIconBalloon x on Player, Wait
+This will display actor x's sprite graphic where x is the actor's ID.
-  ShowIconBalloon x on Event y
+GabParty x
-  ShowIconBalloon x on Event y, Wait
+GabPartyFace x
+This will display party member x's face graphic where x is the position.
-  ShowIconBalloon x on Follower y
+GabPartySprite x
-  ShowIconBalloon x on Follower y, Wait
+This will display party member x's sprite graphic where x is the position.
-  ShowIconBalloon x on This Event
+GabSound filename
-  ShowIconBalloon x on This Event, wait
+This will play a sound from the SE folder under that particular filename.
-  - This will cause the Icon Balloon using icon index x to appear on the
-  player, event y, or follower y. If 'wait' is used, then the event will
-  wait until the balloon has finished playing.
-  ---
+GabSwitch x
+This will enable switch x when this gab finishes playing.
-  ShowIconBalloon x to y on Player
+WaitForGab
-  ShowIconBalloon x to y on Player, Wait
+Causes the game to wait until all gabs are finished playing.
-  ShowIconBalloon x to y on Event z
+--- Display Commands ---
-  ShowIconBalloon x to y on Event z, Wait
-  ShowIconBalloon x to y on Follower z
+ShowGab
-  ShowIconBalloon x to y on Follower z, Wait
+Once the above settings are complete, use this Plugin Command to launch the
+Gab Window and display the above data. This will put the gab data into a
+queue which means if there's another gab playing, this will be next in line.
-  ShowIconBalloon x to y on This Event
+*Note If multiple ShowGabs are used, they will be queued up. The current
-  ShowIconBalloon x to y on This Event, Wait
+playing gab will finish playing before moving onto the next. If it so
-  - This will cause the Icon Balloon start on icon index x and move through
+happens that the inputted Gab would have the same exact settings as a
-  to y, the next icon upward each few frames up to icon index y. This icon
+previously loaded gab within the same queue, it will not be inserted to
-  balloon will be played on the player, event z, or follower z. If 'wait' is
+prevent any redundancy amongst the conversation.
-  used, then the event will wait until the balloon has finished playing.
-  When using this command, x cannot be greater than y.
-</nowiki>
-== [[Improved Battlebacks (YEP)|Improved Battlebacks]] ==
+ForceGab
+Once the above settings are complete, use this Plugin Command to clear all
+the other gabs in the Gab Window and display the above data.
+ClearGab
+This clears out the Gab Window of the current gab and any gabs queued.
+</nowiki>
+== [[Help File Access (YEP)|Help File Access]] ==
   <nowiki>
-You can use the following plugin commands to alter how battlebacks behave in
+You can use the following plugin commands to adjust how accessing the help
-your game. Keep in mind that these plugin commands must be used while the
+file is done for your game.
-party is in battle.
----
+Plugin Commands
-BATTLEBACK id ADD: folder, filename
+  OpenHelp
-BATTLEBACK id ADD: folder, filename, hue
+  - This will open up the help file or URL for your game.
-- Replace 'id' with the battleback you wish to alter as a number larger than
-(i.e. 3 or above). Replace 'folder' with the exact folder name in your
-project's 'img' folder (case sensitive). Replace 'filename' with the image
-filename without the file extension (case sensitive). If 'hue' is used,
-replace 'hue' with a number between 0 and 360 to change the hue of the image
-used. This will add a new battleback stacked on top of battlebacks 1 and 2
-with higher ID's being on top. When newly added, the new battleback will
-start at opacity 0 and fade in with a duration of 20 frames.
-BATTLEBACK id REMOVE
+  ShowMenuHelpCommand
-- Replace 'id' with the battleback you wish to alter as a number larger than
+  - Will make the 'Help' command show up in the main menu.
-(i.e. 3 or above). This will remove the battleback from being shown. When
-this command is used, the battleback will fade with a duration of 20 frames.
-Once it reaches 0 opacity, the battleback will be removed from the battle.
-BATTLEBACK id CHANGE TO: folder, filename
+  HideMenuHelpCommand
-BATTLEBACK id CHANGE TO: folder, filename, hue
+  - Will make the 'Help' command hidden in the main menu.
-- Replace 'id' with the battleback you wish to alter. Replace 'folder' with
+</nowiki>
-the exact folder name in your project's 'img' folder (case sensitive).
-Replace 'filename' with the image filename without the file extension (case
-sensitive). This will change the designated battleback's image to use the
-desired image depicted by the folder and filename. If 'hue' is used, replace
-'hue' with a number between 0 and 360 to change the hue of the image used.
-BATTLEBACK id FADE OUT
+== [[Horror Effects (Olivia)|Horror Effects]] ==
-BATTLEBACK id FADE OUT: duration
-BATTLEBACK id FADE IN
-BATTLEBACK id FADE IN: duration
-- Replace 'id' with the battleback you wish to alter. This will cause the
-designated battleback to fade out/in. If 'duration' is used, replace it with
-a number to indicate how many frames will be used for the fade out/in. If
-no duration is specified, it will default to 20 frames.
-BATTLEBACK id OPACITY: n
+<html><img src='https://img.itch.zone/aW1hZ2UvMzI0NDQyLzE2MDM2MDIuZ2lm/original/11Kxzx.gif'></html>
-BATTLEBACK id OPACITY: n%
-- Replace 'id' with the battleback you wish to alter. Replace 'n' with the
-opacity value you wish to achieve (from 0 to 255) or replace 'n%' with the
-opacity rate you wish to set the battleback to (from 0% to 100%). This will
-set the designated battleback's opacity to that value. If there are any fade
-in or out commands occurring as this command is issued, they'll be disabled.
-BATTLEBACK id SCROLL SPEED X: +n
+To apply horror effects to your game, use these plugin commands in the
-BATTLEBACK id SCROLL SPEED X: -n
+following format:
-BATTLEBACK id SCROLL SPEED Y: +n
-BATTLEBACK id SCROLL SPEED Y: -n
-- Replace 'id' with the battleback you wish to alter. Replace 'n' with the
-value you wish to change the scroll speed X or scroll speed Y of. The higher
-the 'n' value, the faster it scrolls.
-BATTLEBACK id RESET SCROLL SPEED
+; Main
-- Replace 'id' with the battleback you wish to alter. Resets the scroll
-speeds for X and Y back to 0.
-</nowiki>
-== [[Item Core (YEP)|Item Core]] ==
+<pre>
+HorrorEffects target Create Noise
+HorrorEffects target Create Glitch
+HorrorEffects target Create TV
+- Replace 'target' with a compatible effect target. This will create a horror
+noise, glitch, or TV effect on the sprite.
- <nowiki>
+HorrorEffects target Remove Noise
-If you wish to be able to add items to your player's inventory without the
+HorrorEffects target Remove Glitch
-random variance being applied to it, you can use the following plugin
+HorrorEffects target Remove TV
-commands to adjust the settings for that.
+- Replace 'target' with a compatible effect target. This will remove the
+currently existing horror noise, glitch, or TV effect on the sprite.
-Plugin Command:
+HorrorEffects target Clear
-  EnableVarianceStock  - Causes all items acquired from this point forward
+- Replace 'target' with a compatible effect target. This will remove all
-                         to have its variance give stock (nonrandom) values.
+noise, glitch, or TV effects from the sprite.
-  DisableVarianceStock - Causes all items acquired from this point forward
-                         to have its variance give random values.
-A small note is that if you enabled the variance stock values, if the player
+HorrorEffects target Change Noise Rate x
-restarts the game by either going through the title screen or just turning
+- Replace 'target' with a compatible effect target. Replace 'x' with a number
-off the program and starting it back up, the random variance will be in
+value. The higher the number value, the more noise there is. The lower the
-effect again. This plugin command is meant to exist as a short term disable.
+number value, the less noise there is. This can be a decimal value.
-</nowiki>
-=== [[Attachable Augments (YEP)|Attachable Augments]] ===
+HorrorEffects target Change Noise Animated true
-<hr>
+HorrorEffects target Change Noise Animated false
+- Replace 'target' with a compatible effect target. This will animate the
+horror noise if true is used and stop animating the horror noise if false
+is used instead.
- <nowiki>
+HorrorEffects target Change Glitch Max x
-There's a couple of pluging commands you can use with this plugin.
+- Replace 'target' with a compatible effect target. This will set the maximum
+number of glitch slices to x.
-Plugin Command:
+HorrorEffects target Change Glitch Min x
+- Replace 'target' with a compatible effect target. This will set the minimum
+number of glitch slices to x.
-  EnableAugments
+HorrorEffects target Change Glitch Slice x
-  - This will enable augments in the item action menu. With them enabled,
+- Replace 'target' with a compatible effect target. This will set the maximum
-  the player can now attach and detach augments to their items.
+and minimum number of glitch slices to x.
-  DisableAugments
+HorrorEffects target Change Glitch Offset x
-  - This will disable augments in the item action menu and hide their
+- Replace 'target' with a compatible effect target. This will set the glitch
-  options so that the player will be unable to attach or detach augments
+offset (how wild it goes) to x. The higher the number, the further the glitch
-  from their items.
+can go. The lower the number, the closer to the base image it goes.
-  ShowAugments
+HorrorEffects target Change Glitch Animated true
-  - This will show the augments in the item info window when looking at
+HorrorEffects target Change Glitch Animated false
-  item details.
+- Replace 'target' with a compatible effect target. This will animate (true)
+or remove the animation (false) of the glitch effect.
-  HideAugments
+HorrorEffects target Change Glitch Frequency x
-  - This will hide the augments in the item info window when looking at
+- Replace 'target' with a compatible effect target. If animated, this will
-  item details.
+set the glitch frequency to x frames.
-</nowiki>
-=== [[Item Disassemble (YEP)|Item Disassemble]] ===
+HorrorEffects target Change Glitch Strength x
-<hr>
+- Replace 'target' with a compatible effect target. If animated, this will
+set the glitch strength to x. The higher the number, the stronger the glitch
+effect will last. The lower the number, the weaker the effect.
- <nowiki>
+HorrorEffects target Change Glitch Refresh
-You can use the following plugin commands to alter Item Disassemble related
+- Replace 'target' with a compatible effect target. Refreshes the current
-aspects of your game:
+glitched slices for a different setting.
-Plugin Command:
+HorrorEffects target Change TV Thickness x
+- Replace 'target' with a compatible effect target. This will change the
+line thickness of the TV effect. Larger numbers mean thicker lines.
-  ShowItemDisassemble
+HorrorEffects target Change TV Corner x
-  - Shows the Disassemble command in the item menu if the item permits
+- Replace 'target' with a compatible effect target. This will change the
-  disassembling.
+corner size. Use a value between 0 and 1. The larger the number, the larger
+the corners will be.
-  HideItemDisassemble
+HorrorEffects target Change TV Animated true
-  - Hides the Disassemble command in the item menu regardless.
+HorrorEffects target Change TV Animated false
-</nowiki>
+- Replace 'target' with a compatible effect target. true will turn the TV
+effect on. false will turn the TV effect off.
-=== [[Item Durability (YEP)|Item Durability]] ===
+HorrorEffects target Change TV Speed x
-<hr>
+- Replace 'target' with a compatible effect target. This will change the
+speed at which the TV animates.
+</pre>
- <nowiki>
+; Targets
-There are a few plugin commands you can utilize to show/hide the Repair
-option in the Item Action Window and/or enable/disable it.
-Plugin Commands
+<pre>
+These are things you can replace 'target' with:
-  ShowRepairDurability
+Screen
-  HideRepairDurability
+- Target becomes the visible map
-  - This will show/hide the Repair command in the Item Action Window.
-  EnableRepairDurability
+Battle
-  DisableRepairDurability
+- Target becomes the battle screen
-  - This will enable/disable the Repair command in the Item Action Window.
-</nowiki>
-=== [[Item Upgrade Slots (YEP)|Item Upgrade Slots]] ===
+Player
-<hr>
+- Target becomes the first party member
- <nowiki>
+Follower x
-The following are some Plugin Commands you can use for your game regarding
+- Target becomes the party member with slot x
-the upgrade option in the item menu:
-Plugin Command:
+Event x
-  ShowItemUpgrade    - Shows the upgrade option in the item menu.
+- Target becomes the map event with ID x
-  HideItemUpgrade    - Hides the upgrade option in the item menu.
-  DisableItemUpgrade - Disables the upgrade option in the item menu.
-  EnableItemUpgrade  - Enables the upgrade option in the item menu.
-You can use those Plugin Commands at any time to adjust the upgrade option.
+Picture x
-</nowiki>
+- Target becomes the picture with ID x
-== [[Item Synthesis (YEP)|Item Synthesis]] ==
+Actor x
+- Target becomes the actor with ID x
- <nowiki>
+Party x
-The following are Plugin Commands you may use with events.
+- Target becomes the party member with slot x
-Plugin Command:
+Enemy x
-  OpenSynthesis          Opens up the Synthesis Scene from the field.
+- Target becomes the battle enemy with index x
-  ShowSynthesis          Shows the Synthesis command from the main menu.
+</pre>
-  HideSynthesis          Hides the Synthesis command from the main menu.
-  EnableSynthesis        Enables the Synthesis command from the main menu.
-  DisableSynthesis       Disables the Synthesis command from the main menu.
-For those who wish to make the player synthesize only specific recipes, you
+== [[Icon Balloons (YEP)|Icon Balloons]] ==
-can use the following command.
-  OpenSynthesis Item 15 Recipe
+ <nowiki>
-  - or -
+Use these plugin commands to get icon balloons playing on the player/events.
-  OpenSynthesis Weapon 20 Recipe
-  - or -
-  OpenSynthesis Armor 30 Recipe
-This will make the synthesis menu, when opened up, only allow the recipes of
+Plugin Commands
-the Item 15, Weapon 20, or Armor 30 without needing it and not showing the
-recipes of any recipe items within the player's inventory.
-</nowiki>
-== [[Job Points (YEP)|Job Points]] ==
+  ---
- <nowiki>
+  ShowIconBalloon x on Player
-For those wondering how to manually give, remove, or set JP for an actor,
+  ShowIconBalloon x on Player, Wait
-you can use the following Plugin Commands.
-Plugin Commands:
+  ShowIconBalloon x on Event y
+  ShowIconBalloon x on Event y, Wait
-   gainJp actorId jp
+   ShowIconBalloon x on Follower y
-   gainJp actorId jp classId
+   ShowIconBalloon x on Follower y, Wait
-  Replace 'actorId' with the ID of the actor you wish to change the JP of.
-  Replace 'jp' with the amount of JP you wish to alter. If you are using
-  'classId', replace it with the ID of the actor's class you wish to alter.
-  This command will let the actor gain JP.
-   loseJp actorId jp
+   ShowIconBalloon x on This Event
-   loseJp actorId jp classId
+   ShowIconBalloon x on This Event, wait
-   Replace 'actorId' with the ID of the actor you wish to change the JP of.
+   - This will cause the Icon Balloon using icon index x to appear on the
-   Replace 'jp' with the amount of JP you wish to alter. If you are using
+   player, event y, or follower y. If 'wait' is used, then the event will
-  'classId', replace it with the ID of the actor's class you wish to alter.
+   wait until the balloon has finished playing.
-   This command will cause the actor to lose JP.
-   setJp actorId jp
+   ---
-  setJp actorId jp classId
-  Replace 'actorId' with the ID of the actor you wish to change the JP of.
-  Replace 'jp' with the amount of JP you wish to alter. If you are using
-  'classId', replace it with the ID of the actor's class you wish to alter.
-  This command will set the actor's JP to a particular value.
-</nowiki>
-== [[Map Gold Window (YEP)|Map Gold Window]] ==
+  ShowIconBalloon x to y on Player
+  ShowIconBalloon x to y on Player, Wait
- <nowiki>
+  ShowIconBalloon x to y on Event z
-Use the following plugin commands to control the gold window.
+  ShowIconBalloon x to y on Event z, Wait
-Plugin Command:
+  ShowIconBalloon x to y on Follower z
+  ShowIconBalloon x to y on Follower z, Wait
-   OpenMapGoldWindow
+   ShowIconBalloon x to y on This Event
-   Opens the map gold window.
+   ShowIconBalloon x to y on This Event, Wait
+   - This will cause the Icon Balloon start on icon index x and move through
-   CloseMapGoldWindow
+   to y, the next icon upward each few frames up to icon index y. This icon
-  Closes the map gold window.
+   balloon will be played on the player, event z, or follower z. If 'wait' is
+   used, then the event will wait until the balloon has finished playing.
-  MapGoldWindowPosition x
+   When using this command, x cannot be greater than y.
-   Changes the screen position of the map gold window to x. Refer to the
-   NumPad for the screen position like below:
-   8   9
-   5   6
-   2   3
-  If you set the value to 0, it will maintain its current position but will
-  automatically move itself to a different location if it intrudes on the
-   message window.
 </nowiki>
-== [[Map Select Equip (YEP)|Map Select Equip]] ==
+== [[Improved Battlebacks (YEP)|Improved Battlebacks]] ==
   <nowiki>
-Use the following plugin commands to utilize the Map Select Equip plugin.
+You can use the following plugin commands to alter how battlebacks behave in
+your game. Keep in mind that these plugin commands must be used while the
+party is in battle.
---- Plugin Commands ---
+---
-MapSelectEquip var type
+BATTLEBACK id ADD: folder, filename
-- This will open up the Map Select Equip window. Replace 'var' with the ID
+BATTLEBACK id ADD: folder, filename, hue
-of the variable you wish to set the selected item to. Replace 'type' with
+- Replace 'id' with the battleback you wish to alter as a number larger than
-'weapon', 'armor', or 'both'. The 'type' will decide the list type.
+(i.e. 3 or above). Replace 'folder' with the exact folder name in your
+project's 'img' folder (case sensitive). Replace 'filename' with the image
+filename without the file extension (case sensitive). If 'hue' is used,
+replace 'hue' with a number between 0 and 360 to change the hue of the image
+used. This will add a new battleback stacked on top of battlebacks 1 and 2
+with higher ID's being on top. When newly added, the new battleback will
+start at opacity 0 and fade in with a duration of 20 frames.
-MapSelectEquipColumns x
+BATTLEBACK id REMOVE
-- Sets the number of columns for the Map Select Equip Window to x.
+- Replace 'id' with the battleback you wish to alter as a number larger than
+(i.e. 3 or above). This will remove the battleback from being shown. When
+this command is used, the battleback will fade with a duration of 20 frames.
+Once it reaches 0 opacity, the battleback will be removed from the battle.
-MapSelectEquipRows x
+BATTLEBACK id CHANGE TO: folder, filename
-- Sets the number of rows for the Map Select Equip Window to x.
+BATTLEBACK id CHANGE TO: folder, filename, hue
+- Replace 'id' with the battleback you wish to alter. Replace 'folder' with
+the exact folder name in your project's 'img' folder (case sensitive).
+Replace 'filename' with the image filename without the file extension (case
+sensitive). This will change the designated battleback's image to use the
+desired image depicted by the folder and filename. If 'hue' is used, replace
+'hue' with a number between 0 and 360 to change the hue of the image used.
-MapSelectEquipWidth x
+BATTLEBACK id FADE OUT
-- Sets the width for the Map Select Equip Window to x. If 0 is used, then
+BATTLEBACK id FADE OUT: duration
-the window width will be the screen width.
+BATTLEBACK id FADE IN
+BATTLEBACK id FADE IN: duration
+- Replace 'id' with the battleback you wish to alter. This will cause the
+designated battleback to fade out/in. If 'duration' is used, replace it with
+a number to indicate how many frames will be used for the fade out/in. If
+no duration is specified, it will default to 20 frames.
-MapSelectEquipX left
+BATTLEBACK id OPACITY: n
-MapSelectEquipX center
+BATTLEBACK id OPACITY: n%
-MapSelectEquipX right
+- Replace 'id' with the battleback you wish to alter. Replace 'n' with the
-- Sets the Map Select Equip Window to be aligned to the left side of the
+opacity value you wish to achieve (from 0 to 255) or replace 'n%' with the
-screen, center of the screen, or right side of the screen.
+opacity rate you wish to set the battleback to (from 0% to 100%). This will
+set the designated battleback's opacity to that value. If there are any fade
+in or out commands occurring as this command is issued, they'll be disabled.
-MapSelectEquipY top
+BATTLEBACK id SCROLL SPEED X: +n
-MapSelectEquipY middle
+BATTLEBACK id SCROLL SPEED X: -n
-MapSelectEquipY bottom
+BATTLEBACK id SCROLL SPEED Y: +n
-- Sets the Map Select Equip Window to be aligned to the top of the screen,
+BATTLEBACK id SCROLL SPEED Y: -n
-middle of the screen, or bottom of the screen.
+- Replace 'id' with the battleback you wish to alter. Replace 'n' with the
+value you wish to change the scroll speed X or scroll speed Y of. The higher
+the 'n' value, the faster it scrolls.
-ShowMapSelectEquipQuantity
+BATTLEBACK id RESET SCROLL SPEED
-- Show the quantity of the Equips in the Map Select Equip Window.
+- Replace 'id' with the battleback you wish to alter. Resets the scroll
+speeds for X and Y back to 0.
-HideMapSelectEquipQuantity
-- Hide the quantity of the Equips in the Map Select Equip Window.
 </nowiki>
-== [[Map Select Skill (YEP)|Map Select Skill]] ==
+== [[Item Core (YEP)|Item Core]] ==
   <nowiki>
-Use the following plugin commands to utilize the Map Select Skill plugin.
+If you wish to be able to add items to your player's inventory without the
+random variance being applied to it, you can use the following plugin
+commands to adjust the settings for that.
---- Plugin Commands ---
+Plugin Command:
+  EnableVarianceStock  - Causes all items acquired from this point forward
+                         to have its variance give stock (nonrandom) values.
+  DisableVarianceStock - Causes all items acquired from this point forward
+                         to have its variance give random values.
-MapSelectSkill v a s
+A small note is that if you enabled the variance stock values, if the player
-- This will open up the Map Select Skill window. Replace 'v' with the ID of
+restarts the game by either going through the title screen or just turning
-the variable you wish to set to the selected skill. Replace 'a' with the ID
+off the program and starting it back up, the random variance will be in
-of the actor whose skill list you want to see. 's' is optional, but if used,
+effect again. This plugin command is meant to exist as a short term disable.
-it will display the skills from skill type 's' only. Replace 's' with the
+</nowiki>
-skill type's ID number.
-MapSelectSkillColumns x
+=== [[Attachable Augments (YEP)|Attachable Augments]] ===
-- Sets the number of columns for the Map Select Skill Window to x.
+<hr>
-MapSelectSkillRows x
+ <nowiki>
-- Sets the number of rows for the Map Select Skill Window to x.
+There's a couple of pluging commands you can use with this plugin.
-MapSelectSkillWidth x
+Plugin Command:
-- Sets the width for the Map Select Skill Window to x. If 0 is used, then
-the window width will be the screen width.
-MapSelectSkillX left
+  EnableAugments
-MapSelectSkillX center
+  - This will enable augments in the item action menu. With them enabled,
-MapSelectSkillX right
+  the player can now attach and detach augments to their items.
-- Sets the Map Select Skill Window to be aligned to the left side of the
-screen, center of the screen, or right side of the screen.
-MapSelectSkillY top
+  DisableAugments
-MapSelectSkillY middle
+  - This will disable augments in the item action menu and hide their
-MapSelectSkillY bottom
+  options so that the player will be unable to attach or detach augments
-- Sets the Map Select Skill Window to be aligned to the top of the screen,
+  from their items.
-middle of the screen, or bottom of the screen.
-EnableAllMapSelectSkills
+  ShowAugments
-- This will cause all of the skills listed to become selectable regardless
+  - This will show the augments in the item info window when looking at
-of whether or not the actor is able to use them at the time.
+  item details.
-NormalAllMapSelectSkills
+  HideAugments
-- This will cause all of the skills listed to be enabled or disabled based
+  - This will hide the augments in the item info window when looking at
-on whether or not the actor is able to use the skill at the time.
+  item details.
-ShowMapSelectSkillCost
-- Show the cost of the skills in the Map Select Skill Window.
-HideMapSelectSkillCost
-- Hide the cost of the skills in the Map Select Skill Window.
 </nowiki>
-== [[Map Status Window (YEP)|Map Status Window]] ==
+=== [[Item Disassemble (YEP)|Item Disassemble]] ===
+<hr>
   <nowiki>
-There's plugin commands associate with the Map Status Window that you may
+You can use the following plugin commands to alter Item Disassemble related
-use here!
+aspects of your game:
-Plugin Commands:
+Plugin Command:
- OpenMapStatusWindow
+  ShowItemDisassemble
- - This will open the Map Status Window while on the map scene. It will be
+  - Shows the Disassemble command in the item menu if the item permits
- automatically refreshed before opening.
+  disassembling.
- CloseMapStatusWindow
+  HideItemDisassemble
- - This will close the Map Status Window while on the map scene.
+  - Hides the Disassemble command in the item menu regardless.
+</nowiki>
- ToggleMapStatusWindow
+=== [[Item Durability (YEP)|Item Durability]] ===
- - This will switch the Map Status Window between the open and close status
+<hr>
- while on the map scene. When it opens, the window will be refreshed.
-  RefreshMapStatusWindow
+  <nowiki>
- - You can force the window to refresh with this command.
+There are a few plugin commands you can utilize to show/hide the Repair
+option in the Item Action Window and/or enable/disable it.
+Plugin Commands
- SetMapStatusWindowX n
+  ShowRepairDurability
- - This will set the X position of the Map Status Window to n. You can use a
+  HideRepairDurability
- formula for n. This position will persist.
+  - This will show/hide the Repair command in the Item Action Window.
- SetMapStatusWindowY n
+  EnableRepairDurability
- - This will set the Y position of the Map Status Window to n. You can use a
+  DisableRepairDurability
- formula for n. This position will persist.
+  - This will enable/disable the Repair command in the Item Action Window.
 </nowiki>
-== [[Message Core (YEP)|Message Core]] ==
+=== [[Item Upgrade Slots (YEP)|Item Upgrade Slots]] ===
+<hr>
-  <nowiki>The following are some plugin commands you can use through the Event Editor
+  <nowiki>
-to change various aspects about the Message system.
+The following are some Plugin Commands you can use for your game regarding
+the upgrade option in the item menu:
-Plugin Comand
+Plugin Command:
-   MessageRows 6
+   ShowItemUpgrade    - Shows the upgrade option in the item menu.
-   - Changes the Message Rows displayed to 6. If you are using continuous
+   HideItemUpgrade    - Hides the upgrade option in the item menu.
-   Show Text events, this will continue displaying the following lines's
+   DisableItemUpgrade - Disables the upgrade option in the item menu.
-  texts until it hits the row limit. Anything after that is cut off until
+   EnableItemUpgrade  - Enables the upgrade option in the item menu.
-   the next message starts to avoid accidental overlap.
-  MessageWidth 400
+You can use those Plugin Commands at any time to adjust the upgrade option.
-  - Changes the Message Window Width to 400 pixels. This will cut off any
+</nowiki>
-  words that are shown too far to the right so adjust accordingly!
-  EnableWordWrap
+== [[Item Synthesis (YEP)|Item Synthesis]] ==
-  - Enables wordwrapping. If a word extends past the window size, it will
-  automatically move onto the next line. Keep in mind, you will need to use
-  \br to perform line breaks.
-  DisableWordWrap
+ <nowiki>
-  - This disables wordwrapping. Line breaks will be automatic at points
+The following are Plugin Commands you may use with events.
-  where a new line is started in the editor.
-   EnableFastForward
+Plugin Command:
-   - Enables Fast Forward key from working with messages.
+  OpenSynthesis          Opens up the Synthesis Scene from the field.
+   ShowSynthesis          Shows the Synthesis command from the main menu.
+   HideSynthesis          Hides the Synthesis command from the main menu.
+  EnableSynthesis        Enables the Synthesis command from the main menu.
+  DisableSynthesis       Disables the Synthesis command from the main menu.
-  DisableFastForward
+For those who wish to make the player synthesize only specific recipes, you
-  - Disables Fast Forward key from working with messages.
+can use the following command.
-</nowiki>
-=== [[Extended Message Pack 1 (YEP)|Extended Message Pack 1]] ===
+  OpenSynthesis Item 15 Recipe
-<hr>
+  - or -
+  OpenSynthesis Weapon 20 Recipe
+  - or -
+  OpenSynthesis Armor 30 Recipe
- <nowiki>You can use the following plugin commands to adjust a few of the settings
+This will make the synthesis menu, when opened up, only allow the recipes of
-regarding the Message Window.
+the Item 15, Weapon 20, or Armor 30 without needing it and not showing the
+recipes of any recipe items within the player's inventory.
+</nowiki>
-Plugin Commands
+== [[Job Points (YEP)|Job Points]] ==
-  --- Letter Sounds ---
+ <nowiki>
+For those wondering how to manually give, remove, or set JP for an actor,
+you can use the following Plugin Commands.
-  EnableLetterSound
+Plugin Commands:
-  DisableLetterSound
-  - These commands will enable or disable the letter sounds respectively.
-   LetterSoundName Cursor2
+   gainJp actorId jp
-   - This will replace the current letter sound with the written filename.
+   gainJp actorId jp classId
-   The filename is case sensitive. Do not use the file extension.
+  Replace 'actorId' with the ID of the actor you wish to change the JP of.
+  Replace 'jp' with the amount of JP you wish to alter. If you are using
+   'classId', replace it with the ID of the actor's class you wish to alter.
+  This command will let the actor gain JP.
-   LetterSoundVolume 100
+   loseJp actorId jp
-   - This will change the letter sound volume to 100.
+   loseJp actorId jp classId
+  Replace 'actorId' with the ID of the actor you wish to change the JP of.
-   LetterSoundPitch 125
+  Replace 'jp' with the amount of JP you wish to alter. If you are using
-   - This will change the letter sound pitch to 125.
+   'classId', replace it with the ID of the actor's class you wish to alter.
+   This command will cause the actor to lose JP.
-   LetterSoundPitchVariance 10
+   setJp actorId jp
-   - This will cause the letter sound's pitch to fluctuate between -10 & 10.
+  setJp actorId jp classId
+  Replace 'actorId' with the ID of the actor you wish to change the JP of.
+  Replace 'jp' with the amount of JP you wish to alter. If you are using
+  'classId', replace it with the ID of the actor's class you wish to alter.
+   This command will set the actor's JP to a particular value.
+</nowiki>
-  LetterSoundPan 0
+== [[Map Gold Window (YEP)|Map Gold Window]] ==
-  - This will change the letter sound's pan to 0.
-  LetterSoundPanVariance 10
+ <nowiki>
-  - This will cause the letter sound's pan to fluctuate between -10 and 10.
+Use the following plugin commands to control the gold window.
-  LetterSoundInterval 2
+Plugin Command:
-  - This will change the interval at which the letter sounds are played to
-letters. Change it to 0 to play on every letter written out.
-   LetterSoundReset
+   OpenMapGoldWindow
-   - This will reset the letter sounds to their default settings.
+   Opens the map gold window.
-   --- Choice Settings ---
+   CloseMapGoldWindow
+  Closes the map gold window.
-   ChoiceRowMax 4
+   MapGoldWindowPosition x
-   - This will set the maximum amount of visible choices to 4.
+   Changes the screen position of the map gold window to x. Refer to the
+  NumPad for the screen position like below:
-   HideChoice 5
+   8   9
-   - This will cause choice 5 to be hidden.
+   5   6
+   2   3
-   ShowChoice 6
+   If you set the value to 0, it will maintain its current position but will
-   - This will cause choice 6 to be shown and no longer hidden.
+   automatically move itself to a different location if it intrudes on the
+  message window.
+</nowiki>
-  ClearHiddenChoices
+== [[Map Select Equip (YEP)|Map Select Equip]] ==
-  - All choices become visible and are no longer hidden.
-  DisableChoice 1
+ <nowiki>
-  - This will cause choice 1 to be disabled.
+Use the following plugin commands to utilize the Map Select Equip plugin.
-  EnableChoice 2
+--- Plugin Commands ---
-  - This will cause choice 2 to be enabled.
-  ClearDisabledChoices
+MapSelectEquip var type
-  - All choices become enabled and are no longer disabled.
+- This will open up the Map Select Equip window. Replace 'var' with the ID
+of the variable you wish to set the selected item to. Replace 'type' with
+'weapon', 'armor', or 'both'. The 'type' will decide the list type.
-  ClearChoiceSettings
+MapSelectEquipColumns x
-  - All choices are shown and enabled.
+- Sets the number of columns for the Map Select Equip Window to x.
-  --- Message Window Positions ---
+MapSelectEquipRows x
+- Sets the number of rows for the Map Select Equip Window to x.
-  MessageRows 6
+MapSelectEquipWidth x
-  - Changes the Message Rows displayed to 6. If you are using continuous
+- Sets the width for the Map Select Equip Window to x. If 0 is used, then
-  Show Text events, this will continue displaying the following lines's
+the window width will be the screen width.
-  texts until it hits the row limit. Anything after that is cut off until
-  the next message starts to avoid accidental overlap.
-  MessageWidth 400
+MapSelectEquipX left
-  - Changes the Message Window Width to 400 pixels. This will cut off any
+MapSelectEquipX center
-  words that are shown too far to the right so adjust accordingly!
+MapSelectEquipX right
+- Sets the Map Select Equip Window to be aligned to the left side of the
+screen, center of the screen, or right side of the screen.
-  MessagePositionX 300
+MapSelectEquipY top
-  - Sets the Message Window's X Position to 300. This position will be
+MapSelectEquipY middle
-  relative to its horizontal anchor point.
+MapSelectEquipY bottom
+- Sets the Map Select Equip Window to be aligned to the top of the screen,
+middle of the screen, or bottom of the screen.
-  MessagePositionY 400
+ShowMapSelectEquipQuantity
-  - Sets the Message Window's Y Position to 400. This position will be
+- Show the quantity of the Equips in the Map Select Equip Window.
-  relative to its vertical anchor point.
-  MessagePositionXAuto
+HideMapSelectEquipQuantity
-  - Sets the Message Window's X Position to be automatically fitted and not
+- Hide the quantity of the Equips in the Map Select Equip Window.
-  set relative to its horizontal anchor point.
+</nowiki>
-  MessagePositionYAuto
+== [[Map Select Skill (YEP)|Map Select Skill]] ==
-  - Sets the Message Window's Y Position to be automatically fitted and not
-  set relative to its vertical anchor point.
-  MessageAnchorX left
+ <nowiki>
-  - Sets the Message Window's x anchor to 'left', 'center', or 'right' if
+Use the following plugin commands to utilize the Map Select Skill plugin.
-  you are using specified coordinates.
-  MessageAnchorY bottom
+--- Plugin Commands ---
-  - Sets the Message Window's y anchor to 'top', 'center', or 'bottom' if
-  you are using specified coordinates.
-  MessagePositionReset
+MapSelectSkill v a s
-  - Resets both the Message Window's X and Y Positions to its automatic
+- This will open up the Map Select Skill window. Replace 'v' with the ID of
-  positions and not adjusted to its anchor points. The Message Width and the
+the variable you wish to set to the selected skill. Replace 'a' with the ID
-  Message Rows.
+of the actor whose skill list you want to see. 's' is optional, but if used,
-</nowiki>
+it will display the skills from skill type 's' only. Replace 's' with the
+skill type's ID number.
-=== [[Message Backlog (YEP)|Message Backlog]] ===
+MapSelectSkillColumns x
-<hr>
+- Sets the number of columns for the Map Select Skill Window to x.
- <nowiki>The following plugin commands can be used to alter various settings
+MapSelectSkillRows x
-regarding the Message Backlog.
+- Sets the number of rows for the Map Select Skill Window to x.
-Plugin Command:
+MapSelectSkillWidth x
+- Sets the width for the Map Select Skill Window to x. If 0 is used, then
+the window width will be the screen width.
-  EnableMessageBacklog
+MapSelectSkillX left
-  DisableMessageBacklog
+MapSelectSkillX center
-  - This enables/disables the message backlog from being playeraccessed.
+MapSelectSkillX right
+- Sets the Map Select Skill Window to be aligned to the left side of the
+screen, center of the screen, or right side of the screen.
-  EnableMessageLogging
+MapSelectSkillY top
-  DisableMessageLogging
+MapSelectSkillY middle
-  - If enabled, new messages will be recorded to the backlog.
+MapSelectSkillY bottom
-  If disabled, they won't be recorded.
+- Sets the Map Select Skill Window to be aligned to the top of the screen,
+middle of the screen, or bottom of the screen.
-  OpenMessageBacklog
+EnableAllMapSelectSkills
-  - This will forcefully open the message backlog if done on the map scene.
+- This will cause all of the skills listed to become selectable regardless
-  (Highly recommended to be used with Button Common Events)
+of whether or not the actor is able to use them at the time.
-</nowiki>
-== [[Music Menu (YEP)|Music Menu]] ==
+NormalAllMapSelectSkills
+- This will cause all of the skills listed to be enabled or disabled based
+on whether or not the actor is able to use the skill at the time.
+ShowMapSelectSkillCost
+- Show the cost of the skills in the Map Select Skill Window.
+HideMapSelectSkillCost
+- Hide the cost of the skills in the Map Select Skill Window.
+</nowiki>
+== [[Map Status Window (YEP)|Map Status Window]] ==
   <nowiki>
-You can use the following plugin commands to alter the music menu settings
+There's plugin commands associate with the Map Status Window that you may
-for your game in many ways.
+use here!
 Plugin Commands:
-  GoToMusicMenu
+ OpenMapStatusWindow
-  - Sends the player to the music menu scene.
+ - This will open the Map Status Window while on the map scene. It will be
+ automatically refreshed before opening.
-  AllMusicMenuSongs
+ CloseMapStatusWindow
-  - Unlocks all music for the player without the player needing to hear it
+ - This will close the Map Status Window while on the map scene.
-  in the game at least once.
-   NormalMusicMenuSongs
+ ToggleMapStatusWindow
-   - Removes the unlock all setting. The player now needs to hear music in
+ - This will switch the Map Status Window between the open and close status
-   the game at least once to unlock the song. This does not remove already
+ while on the map scene. When it opens, the window will be refreshed.
-   unlocked song entries.
+ RefreshMapStatusWindow
-   UnlockMusicMenuSong x
+ - You can force the window to refresh with this command.
-   UnlockMusicMenuSong x x x
-   - This will unlock song ID x for the game. Use multiple x's to unlock a
+ SetMapStatusWindowX n
-   group of songs at once. x will refer to the ID found in the plugin's
+ - This will set the X position of the Map Status Window to n. You can use a
-   parameters. The referred song will be unlocked without the player needing
+ formula for n. This position will persist.
-   to hear the song in the game at least once.
-</nowiki>
+ SetMapStatusWindowY n
+ - This will set the Y position of the Map Status Window to n. You can use a
-== [[Party System (YEP)|Party System]] ==
+ formula for n. This position will persist.
+</nowiki>
-  <nowiki>
-Here are some plugin commands you can use!
+== [[Message Core (YEP)|Message Core]] ==
-Plugin Command:
+ <nowiki>The following are some plugin commands you can use through the Event Editor
-   OpenPartyMenu     Opens up the Party Menu from the field.
+to change various aspects about the Message system.
-Actors can also be required, meaning the player must have that actor(s) in
+Plugin Comand
-the party before the player is able to leave the party menu. Required actors
+  MessageRows 6
-can be moved around, unlike locked actors. Keep in mind if you do make some
+  - Changes the Message Rows displayed to 6. If you are using continuous
-actors required, do not make the game require more actors than the possible
+  Show Text events, this will continue displaying the following lines's
-maximum battle members or else the player will be stuck in the party menu.
+  texts until it hits the row limit. Anything after that is cut off until
+  the next message starts to avoid accidental overlap.
-Plugin Command:
-   ShowBattleFormation    - Shows 'Formation' command in battle.
+  MessageWidth 400
-   HideBattleFormation    - Hides 'Formation' command in battle.
+  - Changes the Message Window Width to 400 pixels. This will cut off any
-   EnableBattleFormation  - Enables 'Formation' command in battle.
+  words that are shown too far to the right so adjust accordingly!
-   DisableBattleFormation - Disables 'Formation' command in battle.
+  EnableWordWrap
-   LockActor 3          - Locks actor 3.
+  - Enables wordwrapping. If a word extends past the window size, it will
-   LockActor 4 5 6      - Locks actors 4, 5, and 6.
+  automatically move onto the next line. Keep in mind, you will need to use
-   UnlockActor 3        - Unlocks actor 3.
+  \br to perform line breaks.
-   UnlockActor 4 5 6    - Unlocks actors 4, 5, and 6.
-                        * Locked Actors cannot be moved out of their current
+  DisableWordWrap
-                          position and must be in the party.
+  - This disables wordwrapping. Line breaks will be automatic at points
+  where a new line is started in the editor.
-   RequireActor 3       - Player must have actor 3 in party.
-   RequireActor 4 5 6   - Player must have actors 4, 5, and 6 in party.
+  EnableFastForward
-   UnrequireActor 3     - Player no longer needs actor 3 in party.
+  - Enables Fast Forward key from working with messages.
-   UnrequireActor 4 5 6 - Player no longer needs actors 4, 5, and 6 in party.
-                        * Required Actors must be in the party in order for
+  DisableFastForward
-                          the player to be able to exit the party menu.
+  - Disables Fast Forward key from working with messages.
+</nowiki>
-   ChangePartyMax 5     - Changes max party size to 5.
-</nowiki>
+=== [[Extended Message Pack 1 (YEP)|Extended Message Pack 1]] ===
+<hr>
-=== [[Actor Party Switch (YEP)|Actor Party Switch]] ===
-<hr>
+ <nowiki>You can use the following plugin commands to adjust a few of the settings
+regarding the Message Window.
+Plugin Commands
+  --- Letter Sounds ---
+  EnableLetterSound
+  DisableLetterSound
+  - These commands will enable or disable the letter sounds respectively.
+  LetterSoundName Cursor2
+  - This will replace the current letter sound with the written filename.
+  The filename is case sensitive. Do not use the file extension.
+  LetterSoundVolume 100
+  - This will change the letter sound volume to 100.
+  LetterSoundPitch 125
+  - This will change the letter sound pitch to 125.
+  LetterSoundPitchVariance 10
+  - This will cause the letter sound's pitch to fluctuate between -10 & 10.
+  LetterSoundPan 0
+  - This will change the letter sound's pan to 0.
+  LetterSoundPanVariance 10
+  - This will cause the letter sound's pan to fluctuate between -10 and 10.
+  LetterSoundInterval 2
+  - This will change the interval at which the letter sounds are played to
+letters. Change it to 0 to play on every letter written out.
+  LetterSoundReset
+  - This will reset the letter sounds to their default settings.
+  --- Choice Settings ---
+  ChoiceRowMax 4
+  - This will set the maximum amount of visible choices to 4.
+  HideChoice 5
+  - This will cause choice 5 to be hidden.
+  ShowChoice 6
+  - This will cause choice 6 to be shown and no longer hidden.
+  ClearHiddenChoices
+  - All choices become visible and are no longer hidden.
+  DisableChoice 1
+  - This will cause choice 1 to be disabled.
+  EnableChoice 2
+  - This will cause choice 2 to be enabled.
+  ClearDisabledChoices
+  - All choices become enabled and are no longer disabled.
+  ClearChoiceSettings
+  - All choices are shown and enabled.
+  --- Message Window Positions ---
+  MessageRows 6
+  - Changes the Message Rows displayed to 6. If you are using continuous
+  Show Text events, this will continue displaying the following lines's
+  texts until it hits the row limit. Anything after that is cut off until
+  the next message starts to avoid accidental overlap.
+  MessageWidth 400
+  - Changes the Message Window Width to 400 pixels. This will cut off any
+  words that are shown too far to the right so adjust accordingly!
+  MessagePositionX 300
+  - Sets the Message Window's X Position to 300. This position will be
+  relative to its horizontal anchor point.
+  MessagePositionY 400
+  - Sets the Message Window's Y Position to 400. This position will be
+  relative to its vertical anchor point.
+  MessagePositionXAuto
+  - Sets the Message Window's X Position to be automatically fitted and not
+  set relative to its horizontal anchor point.
+  MessagePositionYAuto
+  - Sets the Message Window's Y Position to be automatically fitted and not
+  set relative to its vertical anchor point.
+  MessageAnchorX left
+  - Sets the Message Window's x anchor to 'left', 'center', or 'right' if
+  you are using specified coordinates.
+  MessageAnchorY bottom
+  - Sets the Message Window's y anchor to 'top', 'center', or 'bottom' if
+  you are using specified coordinates.
+  MessagePositionReset
+  - Resets both the Message Window's X and Y Positions to its automatic
+  positions and not adjusted to its anchor points. The Message Width and the
+  Message Rows.
+</nowiki>
+=== [[Message Backlog (YEP)|Message Backlog]] ===
+<hr>
+ <nowiki>The following plugin commands can be used to alter various settings
+regarding the Message Backlog.
+Plugin Command:
+  EnableMessageBacklog
+  DisableMessageBacklog
+  - This enables/disables the message backlog from being playeraccessed.
+  EnableMessageLogging
+  DisableMessageLogging
+  - If enabled, new messages will be recorded to the backlog.
+  If disabled, they won't be recorded.
+  OpenMessageBacklog
+  - This will forcefully open the message backlog if done on the map scene.
+  (Highly recommended to be used with Button Common Events)
+</nowiki>
+== [[Music Menu (YEP)|Music Menu]] ==
+ <nowiki>
+You can use the following plugin commands to alter the music menu settings
+for your game in many ways.
+Plugin Commands:
+  GoToMusicMenu
+  - Sends the player to the music menu scene.
+  AllMusicMenuSongs
+  - Unlocks all music for the player without the player needing to hear it
+  in the game at least once.
+   NormalMusicMenuSongs
+   - Removes the unlock all setting. The player now needs to hear music in
+   the game at least once to unlock the song. This does not remove already
+   unlocked song entries.
+   UnlockMusicMenuSong x
+   UnlockMusicMenuSong x x x
+   - This will unlock song ID x for the game. Use multiple x's to unlock a
+   group of songs at once. x will refer to the ID found in the plugin's
+   parameters. The referred song will be unlocked without the player needing
+   to hear the song in the game at least once.
+</nowiki>
+== [[Notification Window (Arisu)|Notification Window]] ==
+<html><img src='https://img.itch.zone/aW1nLzI0Mzg2ODcucG5n/original/xSWbyO.png' width='300'></html>
+Displaying a notification can be achieved through Plugin Commands.
+Notifications may appear in any scene.
+<pre>
+  Notify: text
+  - Replace 'text' with the text you wish to display.
+  - This can use text codes.
+  - This will appear in the 'Default Location' set by the Plugin Parameter.
+</pre>
+<pre>
+  Notify1: text
+  Notify2: text
+  Notify3: text
+  Notify4: text
+  Notify5: text
+  Notify6: text
+  Notify7: text
+  Notify8: text
+  Notify9: text
+  - Use the number corresponding to the NumPad to determine screen location.
+  - Replace 'text' with the text you wish to display.
+  - This can use text codes.
+</pre>
+<pre>
+  NotifyColor: rgba(255, 0, 0, 1)
+  - This changes the color of the next notification's background to the
+  shown rgba color.
+  Read more about it here: https://www.w3schools.com/cssref/func_rgba.asp
+</pre>
+== [[Patch Notes (YEP)|Patch Notes]] ==
+<pre>
+You can use the following plugin commands to adjust how accessing the Patch
+file is done for your game.
+Plugin Commands
+  OpenPatchNotes
+  - This will open up the Patch file or URL for your game.
+  ShowMenuPatchNotesCommand
+  - Will make the 'PatchNotes' command show up in the main menu.
+  HideMenuPatchNotesCommand
+  - Will make the 'PatchNotes' command hidden in the main menu.
+</pre>
+== [[Party System (YEP)|Party System]] ==
+  <nowiki>
+Here are some plugin commands you can use!
+Plugin Command:
+   OpenPartyMenu     Opens up the Party Menu from the field.
+Actors can also be required, meaning the player must have that actor(s) in
+the party before the player is able to leave the party menu. Required actors
+can be moved around, unlike locked actors. Keep in mind if you do make some
+actors required, do not make the game require more actors than the possible
+maximum battle members or else the player will be stuck in the party menu.
+Plugin Command:
+   ShowBattleFormation    - Shows 'Formation' command in battle.
+   HideBattleFormation    - Hides 'Formation' command in battle.
+   EnableBattleFormation  - Enables 'Formation' command in battle.
+   DisableBattleFormation - Disables 'Formation' command in battle.
+   LockActor 3          - Locks actor 3.
+   LockActor 4 5 6      - Locks actors 4, 5, and 6.
+   UnlockActor 3        - Unlocks actor 3.
+   UnlockActor 4 5 6    - Unlocks actors 4, 5, and 6.
+                        * Locked Actors cannot be moved out of their current
+                          position and must be in the party.
+   RequireActor 3       - Player must have actor 3 in party.
+   RequireActor 4 5 6   - Player must have actors 4, 5, and 6 in party.
+   UnrequireActor 3     - Player no longer needs actor 3 in party.
+   UnrequireActor 4 5 6 - Player no longer needs actors 4, 5, and 6 in party.
+                        * Required Actors must be in the party in order for
+                          the player to be able to exit the party menu.
+   ChangePartyMax 5     - Changes max party size to 5.
+</nowiki>
+=== [[Actor Party Switch (YEP)|Actor Party Switch]] ===
+<hr>
   <nowiki>
@@ Line 2,185: / Line 2,405: @@
    all of the keys of that original function.
 </nowiki>
+== [[Picture Spritesheets (YEP)|Picture Spritesheets]] ==
+<pre>
+Using the Plugin Command event, you can set a specific picture to change to
+a different cell by using the Plugin Command below:
+Plugin Commands:
+  Picture x Frame y
+  - Replace 'x' with the ID of the picture you wish to change the frame of.
+  - Replace 'y' with the frame ID to change the picture to.
+</pre>
 == [[Proximity Compass (Olivia)|Proximity Compass]] ==
@@ Line 2,751: / Line 2,984: @@
    Allows player to move again via input.
 </nowiki>
+== [[Tool Ring System (Irina)|Tool Ring System]] ==
+<html><img src='https://img.itch.zone/aW1hZ2UvNjAwNDg2LzMxODIyODUuZ2lm/original/1pzCl7.gif'></html>
+<pre>
+Open Tool Ring
+- Opens up the tool ring forcefully.
+</pre>
 == [[Victory Aftermath (YEP)|Victory Aftermath]] ==

Difference between revisions of "Category:Plugin Commands (MV)"

Revision as of 19:24, 1 April 2020

Contents

Pages in category "Plugin Commands (MV)"

A

B

C

D

E

F

G

H

I

J

M

N

O

P

Q

R

S

T

V

W

Navigation menu

Search