Difference between revisions of "Category:Plugin Commands (MZ)"

From Yanfly.moe Wiki
Jump to navigation Jump to search
(Animated Map Destination)
Line 16: Line 16:
 
{{VisuMZ Aggro Control System Plugin Commands}}
 
{{VisuMZ Aggro Control System Plugin Commands}}
  
== [[Animated Map Destination]] ==
+
== [[Animated Map Destination VisuStella MZ]] ==
  
 
{{VisuMZ Animated Map Destination Plugin Commands}}
 
{{VisuMZ Animated Map Destination Plugin Commands}}

Revision as of 00:46, 3 January 2022

Welcome to the wiki! This is where you can find resources from Yanfly.moe, Ækashics.moe,
VisuStella, Caz Wolf, Fallen Angel Olivia, Atelier Irina, and other affiliated content creators.


Contents

Plugin Commands are event commands that are used to call upon functions added by a plugin that aren't inherently a part of RPG Maker MZ.

Here is a list of Plugin Command(s) that you may use:

---

Aggro Control System VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

---

AggroControlSystem Aggro.png

AggroControlSystem Command1.png

Actor: Change Aggro
- Changes target actor's aggro value.

  Actor ID:
  - Select which Actor ID to affect.

  Change Aggro By:
  - Change aggro by this amount.
  - Use negative numbers to reduce aggro.

---

AggroControlSystem Command2.png

Actor: Set Aggro
- Set target actor's aggro value.

  Actor ID:
  - Select which Actor ID to affect.

  Set Aggro To:
  - Sets target's aggro to this amount.
  - Aggro must be at least a value of 1.

---

Enemy Plugin Commands

---

AggroControlSystem Aggro.png

AggroControlSystem Command3.png

Enemy: Change Aggro
- Changes target enemy's aggro value.

  Enemy Index:
  - Select which Enemy Index to affect.

  Change Aggro By:
  - Change aggro by this amount.
  - Use negative numbers to reduce aggro.

---

AggroControlSystem Command4.png

Enemy: Set Aggro
- Set target enemy's aggro value.

  Enemy Index:
  - Select which Enemy Index to affect.

  Set Aggro To:
  - Sets target's aggro to this amount.
  - Aggro must be at least a value of 1.

---

Animated Map Destination VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

System Plugin Commands

---

AniDest Command1.png

System: Alter Destination Type
- Alter the destination animation type.

  Sprite Type:
  - Change the sprite type to this.
  - None - No effect
  - Animation - Uses an animation from the database
  - Circle - Drawn circle effect
  - Image - Uses a custom image from img/system/
  - Square - Default box-like effect

---

AniDest Animation.gif

AniDest Command2.png

System: Change Animation Settings
- Change settings used for a 'Animation' Sprite Type.

  Animation ID:
  - Select an animation to play.

  Mirror Animation?:
  - Mirror the animation played?

  Mute SFX?:
  - Mute any sound effects played by the animation?

---

AniDest Circle.gif

AniDest Command3.png

System: Change Circle Settings
- Change settings used for a 'Circle' Sprite Type.

  Hex Color:
  - Use #rrggbb for a hex color.

  Blend Mode:
  - The blend mode used for the sprite.

  Opacity Multiplier:
  - Alter the opacity of the sprite as it animates.

  Scale Multiplier:
  - Increase the size of this sprite by a scale.
  - Use a value of 1.0 for 100% scale.

---

AniDest Image.gif

AniDest Command4.png

System: Change Image Settings
- Change settings used for a 'Image' Sprite Type.

  Filename:
  - Select an image from img/system/ to use as the sprite's bitmap.

  Blend Mode:
  - The blend mode used for the sprite.

  Opacity Multiplier:
  - Alter the opacity of the sprite as it animates.

  Rotate Speed:
  - Rotation speed for the sprite.
  - Use 0 for no rotation.

  Scale Multiplier:
  - Increase the size of this sprite by a scale.
  - Use a value of 1.0 for 100% scale.

---

AniDest Square.gif

AniDest Command5.png

System: Change Square Settings
- Change settings used for a 'Square' Sprite Type.

  Hex Color:
  - Use #rrggbb for a hex color.

  Blend Mode:
  - The blend mode used for the sprite.

  Opacity Multiplier:
  - Alter the opacity of the sprite as it animates.

  Rotate Speed:
  - Rotation speed for the sprite.
  - Use 0 for no rotation.

  Scale Multiplier:
  - Increase the size of this sprite by a scale.
  - Use a value of 1.0 for 100% scale.

---

Animated Pictures VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Animated Picture Plugin Command

---

AniPic Command1.png

Animated Picture: Change Properties
- Changes the properties used for the animated picture.

  Picture ID:
  - Select which Picture ID to affect.

  Loop?:
  - Animated pictures will loop back to beginning once it reaches the
    last frame.

  Wait Frames:
  - Number of frames to wait before moving to next picture cell.

---

Attached Pictures VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Message Plugin Commands

AttachedPictures Msg.gif

---

Message: Attach Picture(s)
- Select which Picture ID's to attach to the Message Window.

  Picture ID(s):
  - Select which Picture ID's to attach to the Message Window.

---

Message: Remove Picture(s)
- Select which Picture ID's to remove from the Message Window.

  Picture ID(s):
  - Select which Picture ID's to remove from the Message Window.

---

Picture Plugin Commands

AttachedPictures Pic.gif

---

Picture: Attach Picture(s)
- Select which Picture ID's to attach to another picture.

  Picture ID(s):
  - Select which Picture ID's to attach to another picture.

  Target Picture ID:
  - Select which Picture ID to attach the above picture(s) to.

---

Picture: Remove Picture(s)
- Select which Picture ID's to remove from any other pictures.

  Picture ID(s):
  - Select which Picture ID's to remove from any other pictures.

---

Battle Core VisuStella MZ

BattleCoreActSeq.png

Skills and items, when used in battle, have a pre-determined series of actions to display to the player as a means of representing what's going on with the action. For some game devs, this may not be enough and they would like to get more involved with the actions themselves.

Action Sequences, added through this plugin, enable this. To give a skill or item a Custom Action Sequence, a couple of steps must be followed:

---

BattleCorePentaSlash.gif

1. Insert the <Custom Action Sequence> notetag into the skill or item's notebox (or else this would not work as intended). 2. Give that skill/item a Common Event through the Effects box. The selected Common Event will contain all the Action Sequence data. 3. Create the Common Event with Action Sequence Plugin Commands and/or event commands to make the skill/item do what you want it to do.

---

The Plugin Commands added through the Battle Core plugin focus entirely on Action Sequences. However, despite the fact that they're made for skills and items, some of these Action Sequence Plugin Commands can still be used for regular Troop events and Common Events.

---

Action Sequence - Action Sets

BattleCoreActSeqSet.gif

Action Sequence Action Sets are groups of commonly used Action Sequence Commands put together for more efficient usage.

---

ACSET: Setup Action Set
- The generic start to most actions.

  Display Action:
  Immortal: On:
  Battle Step:
  Wait For Movement:
  Cast Animation:
  Wait For Animation:
  - Use this part of the action sequence?

---

ACSET: All Targets Action Set
- Affects all targets simultaneously performing the following.

  Dual/Multi Wield?
  - Add times struck based on weapon quantity equipped?

  Perform Action:
  Wait Count:
  Action Animation:
  Wait For Animation:
  Action Effect:
  Immortal: Off:
  - Use this part of the action sequence?
  - Insert values for the Wait Count(s).

---

ACSET: Each Target Action Set
- Goes through each target one by one to perform the following.

  Dual/Multi Wield?
  - Add times struck based on weapon quantity equipped?

  Perform Action:
  Wait Count:
  Action Animation:
  Wait Count:
  Action Effect:
  Immortal: Off:
  - Use this part of the action sequence?
  - Insert values for the Wait Count(s).

---

ACSET: Finish Action
- The generic ending to most actions.

  Immortal: Off:
  Wait For New Line:
  Wait For Effects:
  Clear Battle Log:
  Home Reset:
  Wait For Movement:
  - Use this part of the action sequence?

---

Action Sequences - Angle (Camera)

VisuMZ ActSeqCamera Angle.gif

These action sequences allow you to have control over the camera angle. Requires VisuMZ_3_ActSeqCamera!

---

ANGLE: Change Angle
- Changes the camera angle.
- Requires VisuMZ_3_ActSeqCamera!

  Angle:
  - Change the camera angle to this many degrees.

  Duration:
  - Duration in frames to change camera angle.

  Angle Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Angle?:
  - Wait for angle changes to complete before performing next command?

---

ANGLE: Reset Angle
- Reset any angle settings.
- Requires VisuMZ_3_ActSeqCamera!

  Duration:
  - Duration in frames to reset camera angle.

  Angle Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Angle?:
  - Wait for angle changes to complete before performing next command?

---

ANGLE: Wait For Angle
- Waits for angle changes to complete before performing next command.
- Requires VisuMZ_3_ActSeqCamera!

---

Action Sequences - Animations

BattleCoreCastAni.gif

These Action Sequences are related to the 'Animations' that can be found in the Animations tab of the Database.

---

ANIM: Action Animation
- Plays the animation associated with the action.

  Targets:
  - Select unit(s) to play the animation on.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Attack Animation
- Plays the animation associated with the user's weapon.

  Targets:
  - Select unit(s) to play the animation on.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Attack Animation 2+
- Plays the animation associated with the user's other weapons.
- Plays nothing if there is no other weapon equipped.

  Targets:
  - Select unit(s) to play the animation on.

  Slot:
  - Which weapon slot to get this data from?
  - Main-hand weapon is weapon slot 1.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

BattleCore Update132 Preview.png

ANIM: Balloon Animation
- Plays a balloon animation on target(s).

  Targets:
  - Select unit(s) to play the animation on.

  Balloon Type:
  - What kind of balloon should be played on target(s)?

  Wait for Completion:
  - Wait for balloon animation completion before continuing?

---

ANIM: Balloon Icon (Single)
- Plays a balloon animation using an icon on target(s).
- Requires VisuMZ_4_IconBalloons!

  Targets:
  - Select unit(s) to play the animation on.

  Icon Index:
  - Insert the ID of the icon to show.
  - Tip: Right click > Insert Icon Index

  Wait for Completion:
  - Wait for balloon animation completion before continuing?

---

ANIM: Balloon Icon (Range)
- Plays a balloon animation an icon range on target(s).
- Requires VisuMZ_4_IconBalloons!

  Targets:
  - Select unit(s) to play the animation on.

  Starting Icon Index:
  - Insert the ID of the icon to show.
  - Tip: Right click > Insert Icon Index

  Ending Icon Index:
  - Insert the ID of the icon to show.
  - Tip: Right click > Insert Icon Index

  Wait for Completion:
  - Wait for balloon animation completion before continuing?

---

ANIM: Balloon Icon (Specific)
- Plays a balloon animation with specific icons on target(s).
- Requires VisuMZ_4_IconBalloons!

  Targets:
  - Select unit(s) to play the animation on.

  Icons:
  - Insert the ID(s) of the icon to show.
  - Tip: Right click > Insert Icon Index

  Wait for Completion:
  - Wait for balloon animation completion before continuing?

---

ANIM: Cast Animation
- Plays the cast animation associated with the action.

  Targets:
  - Select unit(s) to play the animation on.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Change Battle Portrait
- Changes the battle portrait of the actor (if it's an actor).
- Can be used outside of battle/action sequences.

  Targets:
  - Select unit(s) to play the animation on.
  - Valid units can only be actors.

  Filename:
  - Select the file to change the actor's portrait to.

---

ANIM: Guard Animation
- Plays the animation associated with the user's guard action (if any).

  Targets:
  - Select unit(s) to play the animation on.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Item Animation
- Plays the animation associated with a specific item.

  Item ID:
  - Which item ID will the animation come from?

  Targets:
  - Select unit(s) to play the animation on.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

CoreEngine PointAni.gif

ANIM: Play at Coordinate
- Plays an animation on the screen at a specific x, y coordinate.
- Requires VisuMZ_0_CoreEngine!

  Animation ID:
  - Plays this animation.

  Coordinates:

    X:
    Y:
    - X/Y coordinate used for the animation.
      You may use JavaScript code.

  Mirror Animation?:
  - Mirror the animation?

  Mute Animation?:
  - Mute the animation?

  Wait for Completion?:
  - Wait the animation to finish before continuing?

---

ANIM: Show Animation
- Plays the a specific animation on unit(s).

  Targets:
  - Select unit(s) to play the animation on.

  Animation ID:
  - Select which animation to play on unit(s).

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Show Animation JS
- Plays the a specific animation on unit(s).
- Uses JavaScript to determine animation ID.

  Targets:
  - Select unit(s) to play the animation on.

  JS: Animation ID:
  - Select which animation to play on unit(s).
  - Uses JavaScript to determine animation ID.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Skill Animation
- Plays the animation associated with a specific skill.

  Skill ID:
  - Which skill ID will the animation come from?

  Targets:
  - Select unit(s) to play the animation on.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Wait For Animation
- Causes the interpreter to wait for any animation(s) to finish.

---

Action Sequences - Battle Log

BattleCoreBattleLog.png

These Action Sequences are related to the Battle Log Window, the window found at the top of the battle screen.

---

BTLOG: Add Text
- Adds a new line of text into the Battle Log.

  Text:
  - Add this text into the Battle Log.
  - Text codes allowed.

  Copy to Combat Log?:
  - Copies text to the Combat Log.
  - Requires VisuMZ_4_CombatLog

    Combat Log Icon:
    - What icon would you like to bind to this entry?
    - Requires VisuMZ_4_CombatLog

---

BTLOG: Clear Battle Log
- Clears all the text in the Battle Log.

---

BTLOG: Display Action
- plays the current action in the Battle Log.

---

BTLOG: Pop Base Line
- Removes the Battle Log's last added base line and  all text up to its
  former location.

---

BTLOG: Push Base Line
- Adds a new base line to where the Battle Log currently is at.

---

BTLOG: Refresh Battle Log
- Refreshes the Battle Log.

---

BTLOG: UI Show/Hide
- Shows or hides the Battle UI (including the Battle Log).

  Show/Hide?:
  - Shows/hides the Battle UI.

---

BTLOG: Wait For Battle Log
- Causes the interpreter to wait for the Battle Log to finish.

---

BTLOG: Wait For New Line
- Causes the interpreter to wait for a new line in the Battle Log.

---

Action Sequences - Camera

VisuMZ ActSeqCamera Pan.gif

These Action Sequences are battle camera-related. Requires VisuMZ_3_ActSeqCamera!

---

CAMERA: Clamp ON/OFF
- Turns battle camera clamping on/off.
- Requires VisuMZ_3_ActSeqCamera!

  Setting:
  - Turns camera clamping on/off.

---

CAMERA: Focus Point
- Focus the battle camera on a certain point in the screen.
- Requires VisuMZ_3_ActSeqCamera!

  X Coordinate:
  - Insert the point to focus the camera on.
  - You may use JavaScript code.

  Y Coordinate:
  - Insert the point to focus the camera on.
  - You may use JavaScript code.

  Duration:
  - Duration in frames for camera focus change.

  Camera Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Camera?
  - Wait for camera changes to complete before performing next command?

---

CAMERA: Focus Target(s)
- Focus the battle camera on certain battler target(s).
- Requires VisuMZ_3_ActSeqCamera!

  Targets:
  - Select unit(s) to focus the battle camera on.

  Duration:
  - Duration in frames for camera focus change.

  Camera Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Camera?
  - Wait for camera changes to complete before performing next command?

---

CAMERA: Offset
- Offset the battle camera from the focus target.
- Requires VisuMZ_3_ActSeqCamera!

  Offset X:
  - How much to offset the camera X by.
  - Negative: left. Positive: right.

  Offset Y:
  - How much to offset the camera Y by.
  - Negative: up. Positive: down.

  Duration:
  - Duration in frames for offset change.

  Camera Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Camera?
  - Wait for camera changes to complete before performing next command?

---

CAMERA: Reset
- Reset the battle camera settings.
- Requires VisuMZ_3_ActSeqCamera!

  Reset Focus?:
  - Reset the focus point?

  Reset Offset?:
  - Reset the camera offset?

  Duration:
  - Duration in frames for reset change.

  Camera Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Camera?
  - Wait for camera changes to complete before performing next command?

---

CAMERA: Wait For Camera
- Waits for camera changes to complete before performing next command.
- Requires VisuMZ_3_ActSeqCamera!

---

Action Sequences - Dragonbones

DragonbonesBattler.gif

These Action Sequences are Dragonbones-related. Requires VisuMZ_2_DragonbonesUnion!

---

DB: Dragonbones Animation
- Causes the unit(s) to play a Dragonbones motion animation.
- Requires VisuMZ_2_DragonbonesUnion!

  Targets:
  - Select which unit(s) to perform a motion animation.

  Motion Animation:
  - What is the name of the Dragonbones motion animation you wish to play?

---

DB: Dragonbones Time Scale
- Causes the unit(s) to change their Dragonbones time scale.
- Requires VisuMZ_2_DragonbonesUnion!

  Targets:
  - Select which unit(s) to perform a motion animation.

  Time Scale:
  - Change the value of the Dragonbones time scale to this.

---

Action Sequences - Elements

Elements.png

These Action Sequences can change up the element(s) used for the action's damage calculation midway through an action.

They also require the VisuMZ_1_ElementStatusCore plugin to be present in order for them to work.

---

ELE: Add Elements
- Adds element(s) to be used when calculating damage.
- Requires VisuMZ_1_ElementStatusCore!

  Elements:
  - Select which element ID to add onto the action.
  - Insert multiple element ID's to add multiple at once.

---

ELE: Clear Element Changes
- Clears all element changes made through Action Sequences.
- Requires VisuMZ_1_ElementStatusCore!

---

ELE: Force Elements
- Forces only specific element(s) when calculating damage.
- Requires VisuMZ_1_ElementStatusCore!

  Elements:
  - Select which element ID to force in the action.
  - Insert multiple element ID's to force multiple at once.

---

ELE: Null Element
- Forces no element to be used when calculating damage.
- Requires VisuMZ_1_ElementStatusCore!

---

Action Sequences - Grid

These Action Sequences are Battle Grid System-related. Requires VisuMZ_2_BattleGridSystem!

---

BattleGridSystem SelectNode.gif

GRID: Action Animation at Node
- Plays action animation at target node.
- Requires VisuMZ_2_BattleGridSystem!

  Action-Selected Node?:
  - Use Action-Selected Node Coordinates if possible?
  - Requires "Empty" or "Any" for <Target: x Grid Node>
  - If the no action is in effect or the action doesn't use that target
    structure, use the node coordinates below:

    Unit:
    - Which unit's Node do you want to play an animation on?

    Rank:
    - Input the number representing the Rank of the Node you want to play an
      animation on.

    Flank:
    - Input the number representing the Flank of the Node you want to play
      an animation on.

  Offset X:
  - Offsets the animation x position.
  - Negative: left. Positive: right.

  Offset Y:
  - Offsets the animation y position.
  - Negative: up. Positive: down.

---

BattleGridSystem NodePassives.gif

GRID: Add Passive State(s) to Node
- Adds Passive State(s) at target node.
- Requires VisuMZ_2_BattleGridSystem!

  State ID(s):
  - Select which State ID(s) to add as a Passive State.

  Action-Selected Node?:
  - Use Action-Selected Node Coordinates if possible?
  - Requires "Empty" or "Any" for <Target: x Grid Node>
  - If the no action is in effect or the action doesn't use that target
    structure, use the node coordinates below:

    Unit:
    - Which unit do you want to add the Passive State Node effect for?

    Rank:
    - Input the number representing the Rank of the Node you want to add a
      Passive State(s) to.

    Flank:
    - Input the number representing the Flank of the Node you want to add a
      Passive State(s) to.

---

BattleGridSystem NodeTraps.gif

GRID: Add Trigger to Node
- Adds Trigger to target node.
- Target node cannot have battler.
- Each node can only contain ONE trigger!
- Otherwise, newly placed triggers will overwrite the old ones.
- Requires VisuMZ_2_BattleGridSystem!

  Skill ID:
  - Select which Skill ID(s) to add as the trigger.

  Action-Selected Node?:
  - Use Action-Selected Node Coordinates if possible?
  - Requires "Empty" or "Any" for <Target: x Grid Node>
  - If the no action is in effect or the action doesn't use that target
    structure, use the node coordinates below:

    Unit:
    - Which unit do you want to add the Trigger Node effect for?

    Rank:
    - Input the number representing the Rank of the Node you want to add a
      Trigger to.

    Flank:
    - Input the number representing the Flank of the Node you want to add a
      Trigger to.

---

BattleGridSystem SelectNode.gif

GRID: Animation ID at Node
- Plays specific animation ID at target node.

  Animation ID:
  - Play this animation at target node.

    Mirror?:
    - Mirror this animation?

    Mute?:
    - Mute this animation?

  Action-Selected Node?:
  - Use Action-Selected Node Coordinates if possible?
  - Requires "Empty" or "Any" for <Target: x Grid Node>
  - If the no action is in effect or the action doesn't use that target
    structure, use the node coordinates below:

    Unit:
    - Which unit's Node do you want to play an animation on?

    Rank:
    - Input the number representing the Rank of the Node you want to play an
      animation on.

    Flank:
    - Input the number representing the Flank of the Node you want to play
      an animation on.

  Offset X:
  - Offsets the animation x position.
  - Negative: left. Positive: right.

  Offset Y:
  - Offsets the animation y position.
  - Negative: up. Positive: down.

---

BattleGridSystem SelectNode.gif

GRID: Animation JS at Node
- Uses JS to calculate which animation to play at target node.

  JS: Animation ID:
  - Calculate which animation to play on unit(s).
  - Uses JavaScript to determine animation ID.

    Mirror?:
    - Mirror this animation?

    Mute?:
    - Mute this animation?

  Action-Selected Node?:
  - Use Action-Selected Node Coordinates if possible?
  - Requires "Empty" or "Any" for <Target: x Grid Node>
  - If the no action is in effect or the action doesn't use that target
    structure, use the node coordinates below:

    Unit:
    - Which unit's Node do you want to play an animation on?

    Rank:
    - Input the number representing the Rank of the Node you want to play an
      animation on.

    Flank:
    - Input the number representing the Flank of the Node you want to play
      an animation on.

  Offset X:
  - Offsets the animation x position.
  - Negative: left. Positive: right.

  Offset Y:
  - Offsets the animation y position.
  - Negative: up. Positive: down.

---

BattleGridSystem SelectNode.gif

GRID: Animation Type at Node
- Plays certain animation type at target node.
- Requires VisuMZ_2_BattleGridSystem!

  Type:
  - What is the animation type you would like to play?
    - Attack
    - Guard
    - Item
    - Skill

    Slot (Attack Type):
    - Which weapon slot to get this data from?
    - Main-hand weapon is weapon slot 1.

    Item ID (Item Type):
    - Which item ID will the animation come from?

    Skill ID (Skill Type):
    - Which skill ID will the animation come from?

  Action-Selected Node?:
  - Use Action-Selected Node Coordinates if possible?
  - Requires "Empty" or "Any" for <Target: x Grid Node>
  - If the no action is in effect or the action doesn't use that target
    structure, use the node coordinates below:

    Unit:
    - Which unit's Node do you want to play an animation on?

    Rank:
    - Input the number representing the Rank of the Node you want to play an
      animation on.

    Flank:
    - Input the number representing the Flank of the Node you want to play
      an animation on.

  Offset X:
  - Offsets the animation x position.
  - Negative: left. Positive: right.

  Offset Y:
  - Offsets the animation y position.
  - Negative: up. Positive: down.

---

BattleGridSystem Knockback.gif

GRID: Move Target(s) In Direction
- Moves target(s) in a specific direction to other Nodes.
- Requires VisuMZ_2_BattleGridSystem!
- This will bypass the "once per action" condition used for both the
  <rule Move User Node direction: x> & <rule Move Target Node direction: x>
  notetags as this is not a notetag effect.

  Targets:
  - Select unit(s) to move.

  Movement Type:
  - Select the Movement type rulings.
  - See VisuMZ_2_BattleGridSystem help file for details.

    Direction:
    - Select the movement direction.

    Distance:
    - The number of nodes to be moved.
    - You may use JavaScript code.

  Duration:
  - Input the number representing the frames used to move.

  Silent Change?:
  - Silent: Discreet changes shown. More apparent later.
  - Visual: Instant changes shown.

---

BattleGridSystem Knockback.gif

GRID: Pull To Target Node
- Pulls battlers towards target node.
- Requires VisuMZ_2_BattleGridSystem!

  Action-Selected Node?:
  - Use Action-Selected Node Coordinates if possible?
  - Requires "Empty" or "Any" for <Target: x Grid Node>

    Unit:
    - Which unit do you want to pull on?

    Rank:
    - Input the number representing the Rank of the Node you want to
      pull to.

    Flank:
    - Input the number representing the Flank of the Node you want to
      pull to.

  Strength:
  - Input the strength level of the pull.

  Duration:
  - Input the number representing the frames used to move.

---

BattleGridSystem Knockback.gif

GRID: Push From Target Node
- Pushes battlers away from target node.
- Requires VisuMZ_2_BattleGridSystem!

  Action-Selected Node?:
  - Use Action-Selected Node Coordinates if possible?
  - Requires "Empty" or "Any" for <Target: x Grid Node>

    Unit:
    - Which unit do you want to push from?

    Rank:
    - Input the number representing the Rank of the Node you want to
      push from.

    Flank:
    - Input the number representing the Flank of the Node you want to
      push from.

  Strength:
  - Input the strength level of the push.

  Duration:
  - Input the number representing the frames used to move.

---

BattleGridSystem NodePassives.gif

GRID: Remove All Passive States from Node
- Removes all Passive State effects at target node.
- Requires VisuMZ_2_BattleGridSystem!

  Action-Selected Node?:
  - Use Action-Selected Node Coordinates if possible?
  - Requires "Empty" or "Any" for <Target: x Grid Node>
  - If the no action is in effect or the action doesn't use that target
    structure, use the node coordinates below:

    Unit:
    - Which unit do you want to clear the Node for?

    Rank:
    - Input the number representing the Rank of the Node you want to clear
      Passive States from.

    Flank:
    - Input the number representing the Flank of the Node you want to clear
      Passive States from.

---

BattleGridSystem NodePassives.gif

GRID: Remove Passive State(s) from Node
- Remove Passive State(s) at target node.
- Requires VisuMZ_2_BattleGridSystem!

  State ID(s):
  - Select which State ID(s) to remove as a Passive State.

  Action-Selected Node?:
  - Use Action-Selected Node Coordinates if possible?
  - Requires "Empty" or "Any" for <Target: x Grid Node>
  - If the no action is in effect or the action doesn't use that target
    structure, use the node coordinates below:

    Unit:
    - Which unit do you want to remove the Passive State Node effect for?

    Rank:
    - Input the number representing the Rank of the Node you want to remove
      a Passive State(s) from.

    Flank:
    - Input the number representing the Flank of the Node you want to remove
      a Passive State(s) from.

---

BattleGridSystem NodeTraps.gif

GRID: Remove Trigger from Node
- Removes Trigger at target node.
- Requires VisuMZ_2_BattleGridSystem!

  Action-Selected Node?:
  - Use Action-Selected Node Coordinates if possible?
  - Requires "Empty" or "Any" for <Target: x Grid Node>
  - If the no action is in effect or the action doesn't use that target
    structure, use the node coordinates below:

    Unit:
    - Which unit do you want to clear Triggers for?

    Rank:
    - Input the number representing the Rank of the Node you want to clear
      Triggers from.

    Flank:
    - Input the number representing the Flank of the Node you want to clear
      Triggers from.

---


Action Sequences - Horror Effects

HorrorEffects Battle.gif

HorrorEffects BattleParty.gif

HorrorEffects BattleEnemy.gif

These Action Sequences are Horror Effects-related.

Requires VisuMZ_2_HorrorEffects!

---

HORROR: Clear All Filters
- Clear all Horror Effects filters on the target battler(s).

  Targets:
  - Select unit(s) to remove Horror Effects for.

---

HORROR: Glitch Create
- Creates the glitch effect on the target battler(s).

  Targets:
  - Select unit(s) to create the Horror Effect for.

  Glitch Slices:
  - Glitch slices to be used with the target.

  Glitch Offset:
  - Default offset value.

  Glitch Animated?:
  - Animate the glitch effect?

  Glitch Frequency:
  - If animated, how frequent to make the glitch effect?
  - Lower = often     Higher = rarer

  Glitch Strength:
  - If animated, how strong is the glitch effect?
  - Lower = weaker     Higher = stronger

---

HORROR: Glitch Remove
- Removes the glitch effect on the target battler(s).

  Targets:
  - Select unit(s) to remove the Horror Effect for.

---

HORROR: Noise Create
- Creates the noise effect on the target battler(s).

  Targets:
  - Select unit(s) to create the Horror Effect for.

  Noise Rate:
  - Noise rate to be used with the target.

  Noise Animated:
  - Animate the noise for the target?

---

HORROR: Noise Remove
- Removes the noise effect on the target battler(s).

  Targets:
  - Select unit(s) to remove the Horror Effect for.

---

HORROR: TV Create
- Creates the TV effect on the target battler(s).

  Targets:
  - Select unit(s) to create the Horror Effect for.

  TV Line Thickness:
  - Default TV line thickness
  - Lower = thinner     Higher = thicker

  TV Corner Size:
  - Default TV line corner size
  - Lower = smaller     Higher = bigger

  TV Animated:
  - Animate the TV?

  TV Speed:
  - Speed used to animate the TV if animated
  - Lower = slower     Higher = faster

---

HORROR: TV Remove
- Removes the TV effect on the target battler(s).

  Targets:
  - Select unit(s) to remove the Horror Effect for.

---


---

Action Sequences - Impact

These Action Sequences are related to creating impact.

Requires VisuMZ_3_ActSeqImpact!

---

ActionSequenceImpact Bizarro.png

IMPACT: Bizarro Inversion
- Swaps blue/red colors on the battlefield.
- Requires VisuMZ_3_ActSeqImpact!

  Bizarro?:
  - Enable Bizarro Inversion effect?

---

ActSeqImpact ColorBreak.gif

IMPACT: Color Break
- Breaks the colors on the screen before reassembling.
- Requires VisuMZ_3_ActSeqImpact!

  Intensity:
  - What is the intensity of the color break effect?

  Duration:
  - What is the duration of the color break effect?

  Easing Type:
  - Select which easing type you wish to apply.

---

ActionSequenceImpact Desat.png

IMPACT: Desaturation
- Desaturates all colors on the battlefield.
- Requires VisuMZ_3_ActSeqImpact!
- Created by Manu Gaming!

  Desaturate?:
  - Enable Desaturation effect?

---

ActSeqImpact MotionBlur.gif

IMPACT: Motion Blur Screen
- Creates a motion blur on the whole screen.
- Requires VisuMZ_3_ActSeqImpact!

  Angle:
  - Determine what angle to make the motion blur at.

  Intensity Rate:
  - This determines intensity rate of the motion blur.
  - Use a number between 0 and 1.

  Duration:
  - How many frames should the motion blur last?
  - What do you want to be its duration?

  Easing Type:
  - Select which easing type you wish to apply.

---

IMPACT: Motion Blur Target(s)
- Creates a motion blur on selected target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to create motion blur effects for.

  Angle:
  - Determine what angle to make the motion blur at.

  Intensity Rate:
  - This determines intensity rate of the motion blur.
  - Use a number between 0 and 1.

  Duration:
  - How many frames should the motion blur last?
  - What do you want to be its duration?

  Easing Type:
  - Select which easing type you wish to apply.

---

ActSeqImpact MotionTrail.gif

IMPACT: Motion Trail Create
- Creates a motion trail effect for the target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to create motion trail effects for.

  Delay:
  - How many frames to delay by when creating a motion trail?
  - The higher the delay, the less motion trails there are.

  Duration:
  - How many frames should the motion trail last?
  - What do you want to be its duration?

  Hue:
  - What do you want to be the hue for the motion trail?

  Starting Opacity:
  - What starting opacity value do you want for the motion trail?
  - Opacity values decrease over time.

  Tone:
  - What tone do you want for the motion trail?
  - Format: [Red, Green, Blue, Gray]

---

IMPACT: Motion Trail Remove
- Removes the motion trail effect from the target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to clear motion trail effects for.

---

ActionSequenceImpact Negative.png

IMPACT: Negative Inversion
- Inverts all the colors on the battlefield.
- Requires VisuMZ_3_ActSeqImpact!
- Created by Manu Gaming!

  Negative?:
  - Enable Negative Inversion effect?

---

ActionSequenceImpact Oversat.png

IMPACT: Oversaturation
- Oversaturates colors on the battlefield.
- Requires VisuMZ_3_ActSeqImpact!

  Oversaturate?:
  - Enable Oversaturation effect?

---

ActSeqImpact Shockwave.gif

IMPACT: Shockwave at Point
- Creates a shockwave at the designated coordinates.
- Requires VisuMZ_3_ActSeqImpact!

  Point: X:
  Point: Y:
  - What x/y coordinate do you want to create a shockwave at?
  - You can use JavaScript code.

  Amplitude:
  - What is the aplitude of the shockwave effect?

  Wavelength:
  - What is the wavelength of the shockwave effect?

  Duration:
  - What is the duration of the shockwave?

---

IMPACT: Shockwave from Each Target(s)
- Creates a shockwave at each of the target(s) location(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to start a shockwave from.

  Target Location:
  - Select which part target group to start a shockwave from.

    Offset X:
    Offset Y:
    - How much to offset the shockwave X/Y point by.

  Amplitude:
  - What is the aplitude of the shockwave effect?

  Wavelength:
  - What is the wavelength of the shockwave effect?

  Duration:
  - What is the duration of the shockwave?

---

IMPACT: Shockwave from Target(s) Center
- Creates a shockwave from the center of the target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to start a shockwave from.

  Target Location:
  - Select which part target group to start a shockwave from.

    Offset X:
    Offset Y:
    - How much to offset the shockwave X/Y point by.

  Amplitude:
  - What is the aplitude of the shockwave effect?

  Wavelength:
  - What is the wavelength of the shockwave effect?

  Duration:
  - What is the duration of the shockwave?

---

ActionSequenceImpact TimeSlow.gif

ActionSequenceImpact TimeFast.gif

IMPACT: Time Scale
- Adjust time to go faster or slower!
- Requires VisuMZ_3_ActSeqImpact!
- Created by Manu Gaming!

  Scale:
  - Adjusts how fast/slow time goes.
  - 1.00 is normal. Lower is slower. Higher is faster.

---

ActionSequenceImpact TimeStop.gif

IMPACT: Time Stop
- Stops time for a set amount of milliseconds.
- Requires VisuMZ_3_ActSeqImpact!
- Created by Manu Gaming!

  Milliseconds:
  - How many milliseconds should time stop for?
  - 1000 milliseconds = 1 second.

---

ActSeqImpact ZoomBlur.gif

IMPACT: Zoom Blur at Point
- Creates a zoom blur at the designated coordinates.
- Requires VisuMZ_3_ActSeqImpact!

  Point: X:
  Point: Y:
  - What x/y coordinate do you want to focus the zoom at?
  - You can use JavaScript code.

  Zoom Strength:
  - What is the strength of the zoom effect?
  - Use a number between 0 and 1.

  Visible Radius:
  - How much of a radius should be visible from the center?

  Duration:
  - What is the duration of the zoom blur?

  Easing Type:
  - Select which easing type you wish to apply.

---

IMPACT: Zoom Blur at Target(s) Center
- Creates a zoom blur at the center of targets.
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to start a zoom blur from.

  Target Location:
  - Select which part target group to start a zoom blur from.

    Offset X:
    Offset Y:
    - How much to offset the zoom blur X/Y point by.

  Zoom Strength:
  - What is the strength of the zoom effect?
  - Use a number between 0 and 1.

  Visible Radius:
  - How much of a radius should be visible from the center?

  Duration:
  - What is the duration of the zoom blur?

  Easing Type:
  - Select which easing type you wish to apply.

---

Action Sequences - Inject

These Action Sequences are related to injecting sprite animations. Requires VisuMZ_3_ActSeqImpact!

---

ActSeqImpact Inject.gif

INJECT: Animation Begin
- Injects and plays a whole spritesheet animation.
- The spritesheet animation will play over the battler until it is finished.
- The battler's original sprite will be invisible until finished.
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to inject the animation on.

  Filename:
  - Select the animation spritesheet file.
  - Located in the /img/sv_actors/ folder.

    Horizontal Cells:
    - How many horizontal cells (or columns) are there?

    Vertical Cells:
    - How many vertical cells (or rows) are there?

    Frame Delay:
    - How many frames are played inbetween cells?

    Smooth Bitmap?:
    - Smooth the spritesheet graphic?

  Offset:

    Offset X:
    - Offsets the X position of the injected animation.
    - Negative: left. Positive: right.

    Offset Y:
    - Offsets the Y position of the injected animation.
    - Negative: up. Positive: down.

---

INJECT: Animation End
- Stops and ends any injected animations on target(s).
- Any inject animation will be prematurely terminated.
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to stop injected animation(s).

---

INJECT: Animation Pause/Resume
- Pauses/resumes any injected animations on target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to pause/resume injected animation(s).

  Pause?:
  - Pause the injected animation?

---

INJECT: Wait For Injected Animation
- Waits for injected animations to complete before performing next command.
- Requires VisuMZ_3_ActSeqImpact!

---

Action Sequences - Mechanics

BattleCoreDmgPopups.png

These Action Sequences are related to various mechanics related to the battle system.

---

MECH: Action Effect
- Causes the unit(s) to take damage/healing from action and incurs any
  changes made such as buffs and states.

  Targets:
  - Select unit(s) to receive the current action's effects.

---

MECH: Active Chain Input Disable
- Disables input for Active Chain Skills at this time.
- Requires VisuMZ_3_ActiveChainSkills!

---

MECH: Add Buff/Debuff
- Adds buff(s)/debuff(s) to unit(s).
- Determine which parameters are affected and their durations.

  Targets:
  - Select unit(s) to receive the buff(s) and/or debuff(s).

  Buff Parameters:
  - Select which parameter(s) to buff.
  - Insert a parameter multiple times to raise its stacks.

  Debuff Parameters:
  - Select which parameter(s) to debuff.
  - Insert a parameter multiple times to raise its stacks.

  Turns:
  - Number of turns to set the parameter(s) buffs to.
  - You may use JavaScript code.

---

MECH: Add State
- Adds state(s) to unit(s).

  Targets:
  - Select unit(s) to receive the buff(s).

  States:
  - Select which state ID(s) to add to unit(s).
  - Insert multiple state ID's to add multiple at once.

---

MECH: Analyze Weakness
- Reveal elemental weakness(es) from target(s).
- Requires VisuMZ_3_WeaknessDisplay!

  Targets:
  - Select unit(s) to reveal elemental weaknesses for.

  Reveal:
  - How many elemental weaknesses do you wish to reveal?
  - You may use JavaScript code.

---

MECH: Armor Penetration
- Adds an extra layer of defensive penetration/reduction.
- You may use JavaScript code for any of these.

  Armor/Magic Penetration:

    Rate:
    - Penetrates an extra multiplier of armor by this value.

    Flat:
    - Penetrates a flat amount of armor by this value.

  Armor/Magic Reduction:

    Rate:
    - Reduces an extra multiplier of armor by this value.

    Flat:
    - Reduces a flat amount of armor by this value.

---

MECH: ATB Gauge
- Alters the ATB/TPB Gauges.
- Requires VisuMZ_2_BattleSystemATB!

  Targets:
  - Select unit(s) to alter the ATB/TPB Gauges for.

  Charging:

    Charge Rate:
    - Changes made to the ATB Gauge if it is currently charging.

  Casting:

    Cast Rate:
    - Changes made to the ATB Gauge if it is currently casting.

    Interrupt?:
    - Interrupt the ATB Gauge if it is currently casting?

---

MECH: Boost Points Change
- Changes Boost Points for target(s).
- Requires VisuMZ_3_BoostAction!

  Targets:
  - Select unit(s) to alter the Boost Points for.

  Alter Boost Points By:
  - Alters the unit(s) Boost Points.
  - Positive for gaining points. Negative for losing points.

---

MECH: Boost Store Data
- Stores the number of Boosts used this action inside a variable.
- Requires VisuMZ_3_BoostAction!

  Variable ID:
  - Which variable do you want to store the data inside?

---

MECH: Break Shield Change
- Changes Break Shields for target(s) if not Break Stunned.
- Requires VisuMZ_4_BreakShields!

  Targets:
  - Select unit(s) to alter the Break Shields for.

  Alter Break Shields By:
  - Alters the unit(s) Break Shields.
  - Positive for gaining shields. Negative for losing shields.

---

MECH: Break Shield Reset
- Resets Break Shields for target(s) if not Break Stunned.
- Requires VisuMZ_4_BreakShields!

  Targets:
  - Select unit(s) to reset the Break Shields for.

---

MECH: BTB Brave Points
- Alters the target(s) Brave Points to an exact value.
- Requires VisuMZ_2_BattleSystemBTB!

  Targets:
  - Select unit(s) to alter the ATB/TPB Gauges for.

  Alter Brave Points By:
  - Alters the target(s) Brave Points.
  - Positive for gaining BP.
  - Negative for losing BP.

---

MECH: Collapse
- Causes the unit(s) to perform its collapse animation if the unit(s)
  has died.

  Targets:
  - Select unit(s) to process a death collapse.

  Force Death:
  - Force death even if the unit has not reached 0 HP?
  - This will remove immortality.

  Wait For Effect?:
  - Wait for the collapse effect to complete before performing next command?

---

MECH: CTB Order
- Alters the CTB Turn Order.
- Requires VisuMZ_2_BattleSystemCTB!

  Targets:
  - Select unit(s) to alter the CTB Turn Order for.

  Change Order By:
  - Changes turn order for target(s) by this amount.
  - Positive increases wait. Negative decreases wait.

---

MECH: CTB Speed
- Alters the CTB Speed.
- Requires VisuMZ_2_BattleSystemCTB!

  Targets:
  - Select unit(s) to alter the CTB Speed for.

  Charge Rate:
  - Changes made to the CTB Speed if it is currently charging.

  Cast Rate:
  - Changes made to the CTB Speed if it is currently casting.

---

MECH: Custom Damage Formula
- Changes the current action's damage formula to custom.
- This will assume the MANUAL damage style.

  Formula:
  - Changes the current action's damage formula to custom.
  - Use 'default' to revert the damage formula.

---

MECH: Damage Popup
- Causes the unit(s) to display the current state of damage received
  or healed.

  Targets:
  - Select unit(s) to prompt a damage popup.

---

MECH: Emulate Attack Effect
- Emulate an "Action Effect" but using a the user's attack skill instead of
  the current action.
- Essentially lets you perform the mechanics of another action without
  having to use another action or needing to pay that action's costs.

  User(s):
  - Select unit(s) to perform the action's effects.

  Targets:
  - Select unit(s) to receive the current action's effects.

---

MECH: Emulate Guard Effect
- Emulate an "Action Effect" but using a the user's guard skill instead of
  the current action.
- Essentially lets you perform the mechanics of another action without
  having to use another action or needing to pay that action's costs.

  User(s):
  - Select unit(s) to perform the action's effects.

  Targets:
  - Select unit(s) to receive the current action's effects.

---

MECH: Emulate Item Effect
- Emulate an "Action Effect" but using a specific item instead of the
  current action.
- Essentially lets you perform the mechanics of another action without
  having to use another action or needing to pay that action's costs.

  Item ID:
  - Which item ID will be emulated?

  User(s):
  - Select unit(s) to perform the action's effects.

  Targets:
  - Select unit(s) to receive the current action's effects.

---

MECH: Emulate Skill Cost
- Pick a skill for target(s) to emulate paying the cost of.
- Lets you cause characters to perform paying the costs of a specific skill
  without needing to actually use them.
- This will include Skill Cooldowns and Limited Skill Uses.

  Skill ID:
  - Which skill ID will have its cost paid for?
  - Use 0 for current action's skill.

  User(s):
  - Select unit(s) to perform the action's effects.

---

MECH: Emulate Skill Effect
- Emulate an "Action Effect" but using a specific skill instead of the
  current action.
- Essentially lets you perform the mechanics of another action without
  having to use another action or needing to pay that action's costs.

  Skill ID:
  - Which skill ID will be emulated?

  User(s):
  - Select unit(s) to perform the action's effects.

  Targets:
  - Select unit(s) to receive the current action's effects.

---

MECH: Enemy Escape
- Causes the enemy unit(s) to escape.

  Targets:
  - Select unit(s) to escape.

---

MECH: Dead Label Jump
- If the active battler is dead, jump to a specific label in the
  common event.

  Jump To Label:
  - If the active battler is dead, jump to this specific label in the
    common event.

---

MECH: ETB Energy Count
- Alters the subject team's available Energy Count.
- Requires VisuMZ_2_BattleSystemETB!

  Energy Count:
  - Alters the subject team's available Energy Count.
  - Positive for gaining energy. Negative for losing energy.

---

MECH: FTB Action Count
- Alters the subject team's available Action Count.
- Requires VisuMZ_2_BattleSystemFTB!

  Action Count:
  - Alters the subject team's available Action Count.
  - Positive for gaining actions. Negative for losing actions.

---

MECH: HP, MP, TP
- Alters the HP, MP, and TP values for unit(s).
- Positive values for healing. Negative values for damage.

  Targets:
  - Select unit(s) to receive the current action's effects.

  HP, MP, TP:

    Rate:
    - Changes made to the parameter based on rate.
    - Positive values for healing. Negative values for damage.

    Flat:
    - Flat changes made to the parameter.
    - Positive values for healing. Negative values for damage.

  Damage Popup?:
  - Display a damage popup after?

---

MECH: Immortal
- Changes the immortal flag of targets. If immortal flag is removed and a
  unit would die, collapse that unit.

  Targets:
  - Alter the immortal flag of these groups. If immortal flag is removed and
    a unit would die, collapse that unit.

  Immortal:
  - Turn immortal flag for unit(s) on/off?

---

MECH: Multipliers
- Changes the multipliers for the current action.
- You may use JavaScript code for any of these.

  Critical Hit%:

    Rate:
    - Affects chance to land a critical hit by this multiplier.

    Flat:
    - Affects chance to land a critical hit by this flat bonus.

  Critical Damage

    Rate:
    - Affects critical damage by this multiplier.

    Flat:
    - Affects critical damage by this flat bonus.

  Damage/Healing

    Rate:
    - Sets the damage/healing multiplier for current action.

    Flat:
    - Sets the damage/healing bonus for current action.

  Hit Rate

    Rate:
    - Affects chance to connect attack by this multiplier.

    Flat:
    - Affects chance to connect attack by this flat bonus.

---

MECH: Once Parallel
- Plays a Common Event parallel to the battle event once without repeating
  itself when done.

  Common Event ID:
  - The ID of the parallel Common Event to play.
  - Does NOT repeat itself when finished.
  - When exiting battle scene, all Once Parallels are cleared.
  - Once Parallels are not retained upon reentering the scene.
  - Once Parallels are not stored in memory and cannot be saved.

---

MECH: OTB Order
- Alters the OTB Turn Order. Best used with single targets.
- Requires VisuMZ_2_BattleSystemOTB!

  Targets:
  - Select unit(s) to alter the OTB Turn Order for.

  Current Turn By:
  - Changes turn order for target(s) by this amount.
  - Positive increases wait. Negative decreases wait.

  Next Turn By:
  - Changes turn order for target(s) by this amount.
  - Positive increases wait. Negative decreases wait.

  Follow Turn By:
  - Changes turn order for target(s) by this amount.
  - Positive increases wait. Negative decreases wait.

---

MECH: PTB Alter Cost
- Alters the action's cost settings.
- Requires VisuMZ_2_BattleSystemPTB!

  Override?:
  - Overrides any 'permanent' settings for Changeability?

  Alter Changeability:
  - Allow the cost type and value to be changeable?

  Alter Cost Type:
  - Change the cost type to this scenario.
  - Use 'Unchanged' for no changes.

  Alter Cost Value:
  - What is the default action cost for this scenario?

---

MECH: PTB Conversion
- Converts full actions into half actions.
- Requires VisuMZ_2_BattleSystemPTB!

  Conversion Count:
  - Converts full actions into half actions.
  - If not enough, consume half actions.

---

MECH: PTB Full/Half Action(s)
- Alters the subject team's available Full/Half Actions.
- Requires VisuMZ_2_BattleSystemPTB!

  Full Actions:
  - Alters the subject team's available Full Actions.
  - Positive for gaining. Negative for losing.

  Half Actions:
  - Alters the subject team's available Half Actions.
  - Positive for gaining. Negative for losing.

---

MECH: Remove Buff/Debuff
- Removes buff(s)/debuff(s) from unit(s).
- Determine which parameters are removed.

  Targets:
  - Select unit(s) to have the buff(s) and/or debuff(s) removed.

  Buff Parameters:
  - Select which buffed parameter(s) to remove.

  Debuff Parameters:
  - Select which debuffed parameter(s) to remove.

---

MECH: Remove State
- Remove state(s) from unit(s).

  Targets:
  - Select unit(s) to have states removed from.

  States:
  - Select which state ID(s) to remove from unit(s).
  - Insert multiple state ID's to remove multiple at once.

---

MECH: State Turns Change By
- Changes target(s) state turns by an amount.
- Requires VisuMZ_1_SkillsStatesCore!

  Targets:
  - Select unit(s) to affect state turns for.

  State ID:
  - What is the ID of the state you wish to change turns for?
  - Only works on states that can have turns.

  Change Turns By:
  - How many turns should the state be changed to?
  - You may use JavaScript code.

  Auto-Add State?:
  - Automatically adds state if actor(s) does not have it applied?

---

MECH: State Turns Change To
- Changes target(s) state turns to a specific value.
- Requires VisuMZ_1_SkillsStatesCore!

  Targets:
  - Select unit(s) to affect state turns for.

  State ID:
  - What is the ID of the state you wish to change turns for?
  - Only works on states that can have turns.

  Change Turns To:
  - How many turns should the state be changed to?
  - You may use JavaScript code.

  Auto-Add State?:
  - Automatically adds state if target(s) does not have it applied?

---

MECH: STB Exploit Effect
- Utilize the STB Exploitation mechanics!
- Requires VisuMZ_2_BattleSystemSTB!

  Target(s) Exploited?:
  - Exploit the below targets?

    Targets:
    - Select unit(s) to become exploited.

    Force Exploitation:
    - Force the exploited status?

  User Exploiter?:
  - Allow the user to become the exploiter?

    Force Exploitation:
    - Force the exploiter status?

---

MECH: STB Extra Action
- Adds an extra action for the currently active battler.
- Requires VisuMZ_2_BattleSystemSTB!

  Extra Actions:
  - How many extra actions should the active battler gain?
  - You may use JavaScript code.

---

MECH: STB Remove Excess Actions
- Removes excess actions from the active battler.
- Requires VisuMZ_2_BattleSystemSTB!

  Remove Actions:
  - How many actions to remove from the active battler?
  - You may use JavaScript code.

---

MECH: Swap Weapon
- Causes the unit(s) to swap their weapon for another.
- Requires VisuMZ_2_WeaponSwapSystem!

  Targets:
  - Select unit(s) to swap weapons for.

  Weapon Type ID:
  - Which weapon type to swap to?
  - This is NOT the weapon's ID.
  - It's the weapon TYPE.

---

MECH: Text Popup
- Causes the unit(s) to display a text popup.

  Targets:
  - Select unit(s) to prompt a text popup.

  Text:
  - What text do you wish to display?

  Text Color:
  - Use #rrggbb for custom colors or regular numbers for text colors from
    the Window Skin.

  Flash Color:
  - Adjust the popup's flash color.
  - Format: [red, green, blue, alpha]

  Flash Duration:
  - What is the frame duration of the flash effect?

---

MECH: Variable Popup
- Causes the unit(s) to display a popup using the data stored inside
  a variable.

  Targets:
  - Select unit(s) to prompt a text popup.

  Variable:
  - Get data from which variable to display as a popup?

  Digit Grouping:
  - Use digit grouping to separate numbers?
  - Requires VisuMZ_0_CoreEngine!

  Text Color:
  - Use #rrggbb for custom colors or regular numbers for text colors from
    the Window Skin.

  Flash Color:
  - Adjust the popup's flash color.
  - Format: [red, green, blue, alpha]

  Flash Duration:
  - What is the frame duration of the flash effect?

---

MECH: Wait For Effect
- Waits for the effects to complete before performing next command.

---

Action Sequences - Motion

BattleCoreActSeqSet.gif

These Action Sequences allow you the ability to control the motions of sideview sprites.

---

MOTION: Clear Freeze Frame
- Clears any freeze frames from the unit(s).

  Targets:
  - Select which unit(s) to clear freeze frames for.

---

MOTION: Freeze Motion Frame
- Forces a freeze frame instantly at the selected motion.
- Automatically clears with a new motion.

  Targets:
  - Select which unit(s) to freeze motions for.

  Motion Type:
  - Freeze this motion for the unit(s).

  Frame Index:
  - Which frame do you want to freeze the motion on?
  - Frame index values start at 0.

  Show Weapon?:
  - If using 'attack', 'thrust', 'swing', or 'missile', display the
    weapon sprite?

---

MOTION: Motion Type
- Causes the unit(s) to play the selected motion.

  Targets:
  - Select which unit(s) to perform a motion.

  Motion Type:
  - Play this motion for the unit(s).

  Show Weapon?:
  - If using 'attack', 'thrust', 'swing', or 'missile', display the
    weapon sprite?

---

MOTION: Perform Action
- Causes the unit(s) to play the proper motion based on the current action.

  Targets:
  - Select which unit(s) to perform a motion.

---

MOTION: Refresh Motion
- Cancels any set motions unit(s) has to do and use their most natural
  motion at the moment.

  Targets:
  - Select which unit(s) to refresh their motion state.

---

MOTION: Wait By Motion Frame
- Creates a wait equal to the number of motion frames passing.
- Time is based on Plugin Parameters => Actors => Motion Speed.

  Motion Frames to Wait?:
  - Each "frame" is equal to the value found in
    Plugin Parameters => Actors => Motion Speed

---

Action Sequences - Movement

BattleCoreActSeqSet.gif

These Action Sequences allow you the ability to control the sprites of actors and enemies in battle.

---

MOVE: Battle Step
- Causes the unit(s) to move forward past their home position to prepare
  for action.

  Targets:
  - Select which unit(s) to move.

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Change Home By Distance
- Change unit(s)'s home position by a distance from their current home
  position(s).
- Sideview-only!

  Targets:
  - Select which unit(s) to change home position(s) for.

  Distance Adjustment:
  - Makes adjustments to distance values to determine which direction to
    change by.
    - Normal - No adjustments made
    - Horizontal - Actors adjust left, Enemies adjust right
    - Vertical - Actors adjust Up, Enemies adjust down
    - Both - Applies both Horizontal and Vertical

    Distance: X:
    - Horizontal distance to move.
    - You may use JavaScript code.

    Distance: Y:
    - Vertical distance to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total change amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Change Home To JS Coordinates
- Change home position(s) to specified JS Coordinates.
- Sideview-only! Uses JavaScript!

  Targets:
  - Select which unit(s) to change home position(s) for.

  JS: Coordinates:
  - Code used to determine the coordinates for the target(s)'s new home
    position.

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total change amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Change Home To Point
- Change home position(s) to a target point on the screen.
- Sideview-only! Points based off Graphics.boxWidth/Height.

  Targets:
  - Select which unit(s) to change home position(s) for.

  Destination Point:
  - Select which point to face.
    - Center
    - Point X, Y
      - Replace 'x' and 'y' with coordinates

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total change amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Change Home To Target(s)
- Moves unit(s) to another unit(s) on the battle field.
- Sideview-only!

  Targets (Moving):
  - Select which unit(s) to change home position(s) for.

  Targets (Destination):
  - Select which unit(s) to change home position to.

    Target Location:
    - Select which part target group to change home position to.
      - front head
      - front center
      - front base
      - middle head
      - middle center
      - middle base
      - back head
      - back center
      - back base

    Melee Distance:
    - The melee distance away from the target location in addition to the
      battler's width.

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total change amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Face Direction
- Causes the unit(s) to face forward or backward.
- Sideview-only!

  Targets:
  - Select which unit(s) to change direction.

  Direction:
  - Select which direction to face.

---

MOVE: Face JS Coordinates
- Causes the unit(s) to face specified JS Coordinates.
- Sideview-only! Uses JavaScript!

  Targets:
  - Select which unit(s) to change direction.

  JS: Coordinates:
  - Code used to determine the coordinates for the target(s) to face
    towards.

  Face Away From?:
  - Face away from the point instead?

---

MOVE: Face Point
- Causes the unit(s) to face a point on the screen.
- Sideview-only!

  Targets:
  - Select which unit(s) to change direction.

  Point:
  - Select which point to face.
    - Home
    - Center
    - Point X, Y
      - Replace 'x' and 'y' with coordinates

  Face Away From?:
  - Face away from the point instead?

---

MOVE: Face Target(s)
- Causes the unit(s) to face other targets on the screen.
- Sideview-only!

  Targets (facing):
  - Select which unit(s) to change direction.

  Targets (destination):
  - Select which unit(s) for the turning unit(s) to face.

  Face Away From?:
  - Face away from the unit(s) instead?

---

MOVE: Float
- Causes the unit(s) to float above the ground.
- Sideview-only!

  Targets:
  - Select which unit(s) to make float.

  Desired Height:
  - Vertical distance to float upward.
  - You may use JavaScript code.

  Duration:
  - Duration in frames for total float amount.

  Float Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Float?:
  - Wait for floating to complete before performing next command?

---

MOVE: Home Reset
- Causes the unit(s) to move back to their home position(s) and face back to
  their original direction(s).

  Targets:
  - Select which unit(s) to move.

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Jump
- Causes the unit(s) to jump into the air.
- Sideview-only!

  Targets:
  - Select which unit(s) to make jump.

  Desired Height:
  - Max jump height to go above the ground
  - You may use JavaScript code.

  Duration:
  - Duration in frames for total jump amount.

  Wait For Jump?:
  - Wait for jumping to complete before performing next command?

---

MOVE: Move Distance
- Moves unit(s) by a distance from their current position(s).
- Sideview-only!

  Targets:
  - Select which unit(s) to move.

  Distance Adjustment:
  - Makes adjustments to distance values to determine which direction to
    move unit(s).
    - Normal - No adjustments made
    - Horizontal - Actors adjust left, Enemies adjust right
    - Vertical - Actors adjust Up, Enemies adjust down
    - Both - Applies both Horizontal and Vertical

    Distance: X:
    - Horizontal distance to move.
    - You may use JavaScript code.

    Distance: Y:
    - Vertical distance to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total movement amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Move To JS Coordinates
- Moves unit(s) to specified JS Coordinates.
- Sideview-only! Uses JavaScript!

  Targets:
  - Select which unit(s) to move.

  JS: Coordinates:
  - Code used to determine the coordinates for the target(s) to move to.

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total movement amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Move To Point
- Moves unit(s) to a designated point on the screen.
- Sideview-only! Points based off Graphics.boxWidth/Height.

  Targets:
  - Select which unit(s) to move.

  Destination Point:
  - Select which point to face.
    - Home
    - Center
    - Point X, Y
      - Replace 'x' and 'y' with coordinates

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total movement amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Move To Target(s)
- Moves unit(s) to another unit(s) on the battle field.
- Sideview-only!

  Targets (Moving):
  - Select which unit(s) to move.

  Targets (Destination):
  - Select which unit(s) to move to.

    Target Location:
    - Select which part target group to move to.
      - front head
      - front center
      - front base
      - middle head
      - middle center
      - middle base
      - back head
      - back center
      - back base

    Melee Distance:
    - The melee distance away from the target location in addition to the
      battler's width.

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total movement amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Opacity
- Causes the unit(s) to change opacity.
- Sideview-only!

  Targets:
  - Select which unit(s) to change opacity.

  Desired Opacity:
  - Change to this opacity value.
  - You may use JavaScript code.

  Duration:
  - Duration in frames for opacity change.

  Opacity Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Opacity?:
  - Wait for opacity changes to complete before performing next command?

---

ActSeqGrowShrink.gif

MOVE: Scale/Grow/Shrink
- Causes the unit(s) to scale, grow, or shrink?.
- Sideview-only!

  Targets:
  - Select which unit(s) to change the scale of.

  Scale X:
  Scale Y:
  - What target scale value do you want?
  - 1.0 is normal size.

  Duration:
  - Duration in frames to scale for.

  Scale Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Scale?:
  - Wait for scaling to complete before performing next command?

---

ActSeqSkew.gif

MOVE: Skew/Distort
- Causes the unit(s) to skew.
- Sideview-only!

  Targets:
  - Select which unit(s) to skew.

  Skew X:
  Skew Y:
  - What variance to skew?
  - Use small values for the best results.

  Duration:
  - Duration in frames to skew for.

  Skew Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Skew?:
  - Wait for skew to complete before performing next command?

---

ActSeqSpin.gif

MOVE: Spin/Rotate
- Causes the unit(s) to spin.
- Sideview-only!

  Targets:
  - Select which unit(s) to spin.

  Angle:
  - How many degrees to spin?

  Duration:
  - Duration in frames to spin for.

  Spin Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Revert Angle on Finish:
  - Upon finishing the spin, revert the angle back to 0.

  Wait For Spin?:
  - Wait for spin to complete before performing next command?

---

MOVE: Wait For Float
- Waits for floating to complete before performing next command.

---

MOVE: Wait For Jump
- Waits for jumping to complete before performing next command.

---

MOVE: Wait For Movement
- Waits for movement to complete before performing next command.

---

MOVE: Wait For Opacity
- Waits for opacity changes to complete before performing next command.

---

MOVE: Wait For Scale
- Waits for scaling to complete before performing next command.

---

MOVE: Wait For Skew
- Waits for skewing to complete before performing next command.

---

MOVE: Wait For Spin
- Waits for spinning to complete before performing next command.

---


Action Sequences - Projectiles

Create projectiles on the screen and fire them off at a target. Requires VisuMZ_3_ActSeqProjectiles!

---

ActSeqProj Ani.gif

PROJECTILE: Animation
- Create an animation projectile and fire it at a target.
- Requires VisuMZ_3_ActSeqProjectiles!

  Coordinates:

    Start Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should start from.
        - Target - Start from battler target(s)
        - Point - Start from a point on the screen

        Target(s):
        - Select which unit(s) to start the projectile from.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile from.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to start the projectile at.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

    Goal Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should go to.
        - Target - Goal is battler target(s)
        - Point - Goal is a point on the screen

        Target(s):
        - Select which unit(s) for projectile to go to.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile to.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to send the projectile to.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

  Settings:

    Animation ID:
    - Determine which animation to use as a projectile.

    Duration:
    - Duration for the projectile(s) to travel.

    Wait For Projectile?:
    - Wait for projectile(s) to reach their destination before going onto
      the next command?

    Wait For Animation?:
    - Wait for animation to finish before going to the next command?

    Extra Settings:
    - Add extra settings to the projectile?

      Auto Angle?:
      - Automatically angle the projectile to tilt the direction
        it's moving?

      Angle Offset:
      - Alter the projectile's tilt by this many degrees.

      Arc Peak:
      - This is the height of the project's trajectory arc in pixels.

      Easing:
      - Select which easing type to apply to the projectile's trajectory.

      Spin Speed:
      - Determine how much angle the projectile spins per frame.
      - Does not work well with "Auto Angle".

    Effect Emulation:

      Action Effect?:
      - Emulate current Action Effect when projectile reaches target?
      - Only works with start and goal targets.

      Item Effect ID?:
      - Emulate an Item Effect when projectile reaches target?
      - Use 0 to not use.
      - Only works with start and goal targets.

      Skill Effect ID?:
      - Emulate a Skill Effect when projectile reaches target?
      - Use 0 to not use.
      - Only works with start and goal targets.

      Common Event ID:
      - Plays a Once Parallel Common Event upon reaching target.
      - Use 0 to not use.
      - Works regardless of start/goal targets.

---

ActSeqProj Icon.gif

PROJECTILE: Icon
- Create an icon projectile and fire it at a target.
- Requires VisuMZ_3_ActSeqProjectiles!

  Coordinates:

    Start Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should start from.
        - Target - Start from battler target(s)
        - Point - Start from a point on the screen

        Target(s):
        - Select which unit(s) to start the projectile from.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile from.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to start the projectile at.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

    Goal Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should go to.
        - Target - Goal is battler target(s)
        - Point - Goal is a point on the screen

        Target(s):
        - Select which unit(s) for projectile to go to.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile to.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to send the projectile to.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

  Settings:

    Icon:
    - Determine which icon to use as a projectile.
    - You may use JavaScript code.

    Duration:
    - Duration for the projectile(s) to travel.

    Wait For Projectile?:
    - Wait for projectile(s) to reach their destination before going onto
      the next command?

    Extra Settings:
    - Add extra settings to the projectile?

      Auto Angle?:
      - Automatically angle the projectile to tilt the direction
        it's moving?

      Angle Offset:
      - Alter the projectile's tilt by this many degrees.

      Arc Peak:
      - This is the height of the project's trajectory arc in pixels.

      Blend Mode:
      - What kind of blend mode do you wish to apply to the projectile?
        - Normal
        - Additive
        - Multiply
        - Screen

      Easing:
      - Select which easing type to apply to the projectile's trajectory.

      Hue:
      - Adjust the hue of the projectile.
      - Insert a number between 0 and 360.

      Scale:
      - Adjust the size scaling of the projectile.
      - Use decimals for exact control.

      Spin Speed:
      - Determine how much angle the projectile spins per frame.
      - Does not work well with "Auto Angle".

    Effect Emulation:

      Action Effect?:
      - Emulate current Action Effect when projectile reaches target?
      - Only works with start and goal targets.

      Item Effect ID?:
      - Emulate an Item Effect when projectile reaches target?
      - Use 0 to not use.
      - Only works with start and goal targets.

      Skill Effect ID?:
      - Emulate a Skill Effect when projectile reaches target?
      - Use 0 to not use.
      - Only works with start and goal targets.

      Common Event ID:
      - Plays a Once Parallel Common Event upon reaching target.
      - Use 0 to not use.
      - Works regardless of start/goal targets.

---

ActSeqProj Picture.gif

PROJECTILE: Picture
- Create a picture projectile and fire it at a target.
- Requires VisuMZ_3_ActSeqProjectiles!

  Coordinates:

    Start Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should start from.
        - Target - Start from battler target(s)
        - Point - Start from a point on the screen

        Target(s):
        - Select which unit(s) to start the projectile from.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile from.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to start the projectile at.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

    Goal Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should go to.
        - Target - Goal is battler target(s)
        - Point - Goal is a point on the screen

        Target(s):
        - Select which unit(s) for projectile to go to.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile to.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to send the projectile to.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

  Settings:

    Picture Filename:
    - Determine which picture to use as a projectile.

    Duration:
    - Duration for the projectile(s) to travel.

    Wait For Projectile?:
    - Wait for projectile(s) to reach their destination before going onto
      the next command?

    Extra Settings:
    - Add extra settings to the projectile?

      Auto Angle?:
      - Automatically angle the projectile to tilt the direction
        it's moving?

      Angle Offset:
      - Alter the projectile's tilt by this many degrees.

      Arc Peak:
      - This is the height of the project's trajectory arc in pixels.

      Blend Mode:
      - What kind of blend mode do you wish to apply to the projectile?
        - Normal
        - Additive
        - Multiply
        - Screen

      Easing:
      - Select which easing type to apply to the projectile's trajectory.

      Hue:
      - Adjust the hue of the projectile.
      - Insert a number between 0 and 360.

      Scale:
      - Adjust the size scaling of the projectile.
      - Use decimals for exact control.

      Spin Speed:
      - Determine how much angle the projectile spins per frame.
      - Does not work well with "Auto Angle".

    Effect Emulation:

      Action Effect?:
      - Emulate current Action Effect when projectile reaches target?
      - Only works with start and goal targets.

      Item Effect ID?:
      - Emulate an Item Effect when projectile reaches target?
      - Use 0 to not use.
      - Only works with start and goal targets.

      Skill Effect ID?:
      - Emulate a Skill Effect when projectile reaches target?
      - Use 0 to not use.
      - Only works with start and goal targets.

      Common Event ID:
      - Plays a Once Parallel Common Event upon reaching target.
      - Use 0 to not use.
      - Works regardless of start/goal targets.

---

Action Sequences - Skew (Camera)

VisuMZ ActSeqCamera Skew.gif

These action sequences allow you to have control over the camera skew. Requires VisuMZ_3_ActSeqCamera!

---

SKEW: Change Skew
- Changes the camera skew.
- Requires VisuMZ_3_ActSeqCamera!

  Skew X:
  - Change the camera skew X to this value.

  Skew Y:
  - Change the camera skew Y to this value.

  Duration:
  - Duration in frames to change camera skew.

  Skew Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Skew?:
  - Wait for skew changes to complete before performing next command?

---

SKEW: Reset Skew
- Reset any skew settings.
- Requires VisuMZ_3_ActSeqCamera!

  Duration:
  - Duration in frames to reset camera skew.

  Skew Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Skew?:
  - Wait for skew changes to complete before performing next command?

---

SKEW: Wait For Skew
- Waits for skew changes to complete before performing next command.
- Requires VisuMZ_3_ActSeqCamera!

---

Action Sequences - Target

BattleCoreTargetActSeq.png

If using a manual target by target Action Sequence, these commands will give you full control over its usage.

Refer to the image above for reference on how this works.

---

TARGET: Current Index
- Sets the current index to this value.
- Then decide to jump to a label (optional).

  Set Index To:
  - Sets current targeting index to this value.
  - 0 is the starting index of a target group.

  Jump To Label:
  - If a target is found after the index change, jump to this label in the
    Common Event.

---

TARGET: Next Target
- Moves index forward by 1 to select a new current target.
- Then decide to jump to a label (optional).

  Jump To Label:
  - If a target is found after the index change, jump to this label in the
    Common Event.

---

TARGET: Previous Target
- Moves index backward by 1 to select a new current target.
- Then decide to jump to a label (optional).

  Jump To Label:
  - If a target is found after the index change, jump to this label in the
    Common Event.

---

TARGET: Random Target
- Sets index randomly to determine new currernt target.
- Then decide to jump to a label (optional).

  Force Random?:
  - Index cannot be its previous index amount after random.

  Jump To Label:
  - If a target is found after the index change, jump to this label in the
    Common Event.

---

Action Sequences - Voice

VisuMZ.131.jpg

---

VOICE: Common Line
- Plays a common voice line from target battler(s).
- Requires VisuMZ_3_BattleVoices!

  Speaker Target(s):
  - Select unit(s) to play voice lines from.

  Voice Line:
  - What voice line do you wish to play?

---

VOICE: Play Special Line
- Plays a special voice line from target battler(s).
- Requires VisuMZ_3_BattleVoices!

  Speaker Target(s):
  - Select unit(s) to play voice lines from.

  Voice Line Type:
  - What voice line type do you wish to play?
    - Action Name
    - Chant Line
    - Item Name
    - Skill Name
    - Spell Name
    - Unique Lines

  Name / Letter:
  - What voice letter/name do you want to play?

---

Action Sequences - Weapon

BattleCore DualWield.gif

Allows for finer control over Dual/Multi Wielding actors.

Only works for Actors.

---

WEAPON: Clear Weapon Slot
- Clears the active weapon slot (making others valid again).
- Only works for Actors.

  Targets:
  - Select unit(s) to clear the active weapon slot for.

---

WEAPON: Next Weapon Slot
- Goes to next active weapon slot (making others invalid).
- If next slot is weaponless, don't label jump.

  Targets:
  - Select unit(s) to change the next active weapon slot for.

---

WEAPON: Set Weapon Slot
- Sets the active weapon slot (making others invalid).
- Only works for Actors.

  Targets:
  - Select unit(s) to change the active weapon slot for.

  Weapon Slot ID:
  - Select weapon slot to make active (making others invalid).
  - Use 0 to clear and normalize. You may use JavaScript code.

---

Action Sequences - Zoom (Camera)

VisuMZ ActSeqCamera Zoom.gif

These Action Sequences are zoom-related. Requires VisuMZ_3_ActSeqCamera!

---

ZOOM: Change Scale
- Changes the zoom scale.
- Requires VisuMZ_3_ActSeqCamera!

  Scale:
  - The zoom scale to change to.

  Duration:
  - Duration in frames to reset battle zoom.

  Zoom Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Zoom?
  - Wait for zoom changes to complete before performing next command?

---

ZOOM: Reset Zoom
- Reset any zoom settings.
- Requires VisuMZ_3_ActSeqCamera!

  Duration:
  - Duration in frames to reset battle zoom.

  Zoom Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Zoom?
  - Wait for zoom changes to complete before performing next command?

---

ZOOM: Wait For Zoom
- Waits for zoom changes to complete before performing next command.
Requires VisuMZ_3_ActSeqCamera!

---

Battle Cursor VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Battle Cursor Plugin Commands

BattleCursor Preview.gif

---

BattleCursor Command1.png

Battle Cursor: Change Actor Cursor
- Change target actor's battle cursor settings.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Appearance Type:
  - Select the appearance type for the battle select cursor.

    Icon Index:
    - If "icon" is selected as the appearance type, use this icon as
      the cursor.

    Picture Filename:
    - If "picture" is selected as the appearance type, use this image from
      img/pictures/ as the cursor.

    System Filename:
    - If "system" is selected as the appearance type, use this image from
      img/system/ as the cursor.

    Frame Delay:
    - The frame delay for any animated "picture" or "system" cursors before
      moving onto the next frame.

  Anchor:

    Anchor X:
    Anchor Y:
    - Select the position to determine where the cursor's Anchor
      is located.

  Position:

    Position X:
    Position Y:
    - Select the placement to determine where the cursor's Position
      is located.

  Offset:

    Offset X:
    Offset Y:
    - Select how much to offset the cursor's X/Y position by.

  Wave:

    Wave Type:
    - Determine how the cursor moves while active.

    Speed:
    - Select how fast the cursor oscillates.
    - Lower is slower. Higher is faster.

    Distance:
    - Select how far the cursor sprite will oscillate from its origin.

---

BattleCursor Command2.png

Battle Cursor: Change Party Member Cursor
- Change target party member's battle cursor settings.

  Party Index(es):
  - Select which party member index(es) to affect.

  Appearance Type:
  - Select the appearance type for the battle select cursor.

    Icon Index:
    - If "icon" is selected as the appearance type, use this icon as
      the cursor.

    Picture Filename:
    - If "picture" is selected as the appearance type, use this image from
      img/pictures/ as the cursor.

    System Filename:
    - If "system" is selected as the appearance type, use this image from
      img/system/ as the cursor.

    Frame Delay:
    - The frame delay for any animated "picture" or "system" cursors before
      moving onto the next frame.

  Anchor:

    Anchor X:
    Anchor Y:
    - Select the position to determine where the cursor's Anchor
      is located.

  Position:

    Position X:
    Position Y:
    - Select the placement to determine where the cursor's Position
      is located.

  Offset:

    Offset X:
    Offset Y:
    - Select how much to offset the cursor's X/Y position by.

  Wave:

    Wave Type:
    - Determine how the cursor moves while active.

    Speed:
    - Select how fast the cursor oscillates.
    - Lower is slower. Higher is faster.

    Distance:
    - Select how far the cursor sprite will oscillate from its origin.

---

BattleCursor Command3.png

Battle Cursor: Change Enemy Member Cursor
- Change target enemy's battle cursor settings.

  Enemy Index(es):
  - Select which enemy troop index(es) to affect.

  Appearance Type:
  - Select the appearance type for the battle select cursor.

    Icon Index:
    - If "icon" is selected as the appearance type, use this icon as
      the cursor.

    Picture Filename:
    - If "picture" is selected as the appearance type, use this image from
      img/pictures/ as the cursor.

    System Filename:
    - If "system" is selected as the appearance type, use this image from
      img/system/ as the cursor.

    Frame Delay:
    - The frame delay for any animated "picture" or "system" cursors before
      moving onto the next frame.

  Anchor:

    Anchor X:
    Anchor Y:
    - Select the position to determine where the cursor's Anchor
      is located.

  Position:

    Position X:
    Position Y:
    - Select the placement to determine where the cursor's Position
      is located.

  Offset:

    Offset X:
    Offset Y:
    - Select how much to offset the cursor's X/Y position by.

  Wave:

    Wave Type:
    - Determine how the cursor moves while active.

    Speed:
    - Select how fast the cursor oscillates.
    - Lower is slower. Higher is faster.

    Distance:
    - Select how far the cursor sprite will oscillate from its origin.

---

Battle System - ATB VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

VisuMZ ATB Preview1.png

---

VisuMZ ATB Command1.png

Actor: Change Field Gauge Icon
- Changes the icons used for the specific actor(s) on the ATB Field Gauge.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Icon:
  - Changes the graphic to this icon.

---

VisuMZ ATB Update11 Command1.png

Actor: Change Field Gauge Face
- Changes the faces used for the specific actor(s) on the ATB Field Gauge.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Face Name:
  - This is the filename for the target face graphic.

  Face Index:
  - This is the index for the target face graphic.

---

VisuMZ ATB Command2.png

Actor: Clear Field Gauge Graphic
- Clears the ATB Field Gauge graphics for the actor(s).
- The settings will revert to the Plugin Parameter settings.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

---

Enemy Plugin Commands

VisuMZ ATB Preview1.png

---

VisuMZ ATB Command3.png

Enemy: Change Field Gauge Icon
- Changes the icons used for the specific enemy(ies) on the ATB Field Gauge.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

  Icon:
  - Changes the graphic to this icon.

---

VisuMZ ATB Command4.png

Enemy: Change Field Gauge Face
- Changes the faces used for the specific enemy(ies) on the ATB Field Gauge.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

  Face Name:
  - This is the filename for the target face graphic.

  Face Index:
  - This is the index for the target face graphic.

---

VisuMZ ATB Command5.png

Enemy: Clear Field Gauge Graphic
- Clears the ATB Field Gauge graphics for the enemy(ies).
- The settings will revert to the Plugin Parameter settings.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

---

System Plugin Commands

---

BattleSysATB Update7 Command1.png

System: ATB Field Gauge Visibility
- Determine the visibility of the ATB Field Gauge.

  Visibility:
  - Changes the visibility of the ATB Field Gauge.

---

Battle System - BTB VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

BattleSysBTB TurnOrder.png

---

BattleSysBTB Command 1.png

Actor: Change BTB Turn Order Icon
- Changes the icons used for the specific actor(s) on the BTB Turn Order.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Icon:
  - Changes the graphic to this icon.

---

BattleSysBTB Command 2.png

Actor: Change BTB Turn Order Face
- Changes the faces used for the specific actor(s) on the BTB Turn Order.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Face Name:
  - This is the filename for the target face graphic.

  Face Index:
  - This is the index for the target face graphic.

---

BattleSysBTB Command 3.png

Actor: Clear BTB Turn Order Graphic
- Clears the BTB Turn Order graphics for the actor(s).
- The settings will revert to the Plugin Parameter settings.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

---

Enemy Plugin Commands

BattleSysBTB TurnOrder.png

---

BattleSysBTB Command 4.png

Enemy: Change BTB Turn Order Icon
- Changes the icons used for the specific enemy(ies) on the BTB Turn Order.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

  Icon:
  - Changes the graphic to this icon.

---

BattleSysBTB Command 5.png

Enemy: Change BTB Turn Order Face
- Changes the faces used for the specific enemy(ies) on the BTB Turn Order.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

  Face Name:
  - This is the filename for the target face graphic.

  Face Index:
  - This is the index for the target face graphic.

---

BattleSysBTB Command 6.png

Enemy: Clear BTB Turn Order Graphic
- Clears the BTB Turn Order graphics for the enemy(ies).
- The settings will revert to the Plugin Parameter settings.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

---

System Plugin Commands

BattleSysBTB TurnOrder.png

---

BattleSysBTB Command 7.png

System: BTB Turn Order Visibility
- Determine the visibility of the BTB Turn Order Display.

  Visibility:
  - Changes the visibility of the BTB Turn Order Display.

---

Battle System - CTB VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

CTB TurnOrder.png

---

CTB Command1.png

Actor: Change CTB Turn Order Icon
- Changes the icons used for the specific actor(s) on the CTB Turn Order.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Icon:
  - Changes the graphic to this icon.

---

CTB Update11 Command1.png

Actor: Change CTB Turn Order Face
- Changes the faces used for the specific actor(s) on the CTB Turn Order.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Face Name:
  - This is the filename for the target face graphic.

  Face Index:
  - This is the index for the target face graphic.

---

CTB Command2.png

Actor: Clear CTB Turn Order Graphic
- Clears the CTB Turn Order graphics for the actor(s).
- The settings will revert to the Plugin Parameter settings.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

---

Enemy Plugin Commands

CTB TurnOrder.png

---

CTB Command3.png

Enemy: Change CTB Turn Order Icon
- Changes the icons used for the specific enemy(ies) on the CTB Turn Order.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

  Icon:
  - Changes the graphic to this icon.

---

CTB Command4.png

Enemy: Change CTB Turn Order Face
- Changes the faces used for the specific enemy(ies) on the CTB Turn Order.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

  Face Name:
  - This is the filename for the target face graphic.

  Face Index:
  - This is the index for the target face graphic.

---

CTB Command5.png

Enemy: Clear CTB Turn Order Graphic
- Clears the CTB Turn Order graphics for the enemy(ies).
- The settings will revert to the Plugin Parameter settings.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

---

System Plugin Commands

---

CTB Command6.png

System: CTB Turn Order Visibility
- Determine the visibility of the CTB Turn Order Display.

  Visibility:
  - Changes the visibility of the CTB Turn Order Display.

---

Battle System - ETB VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

System Plugin Commands

BattleSysETB Layout.png

BattleSysETB Command1.png

---

System: ETB Energy Count Visibility
- Determine the visibility of the ETB Energy Count Display.

  Visibility:
  - Changes the visibility of the ETB Energy Count Display.

---

Battle System - FTB VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

System Plugin Commands

BattleSysFTB Actions.png

---

BattleSysFTB Command1.png

System: FTB Action Count Visibility
- Determine the visibility of the FTB Action Count Display.

  Visibility:
  - Changes the visibility of the FTB Action Count Display.

---

Battle System - OTB VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

BattleSysOTB TurnOrderDisplay.png

---

BattleSysOTB Command1.png

Actor: Change OTB Turn Order Icon
- Changes the icons used for the specific actor(s) on the OTB Turn Order.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Icon:
  - Changes the graphic to this icon.

---

BattleSysOTB Command2.png

Actor: Change OTB Turn Order Face
- Changes the faces used for the specific actor(s) on the OTB Turn Order.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Face Name:
  - This is the filename for the target face graphic.

  Face Index:
  - This is the index for the target face graphic.

---

BattleSysOTB Command3.png

Actor: Clear OTB Turn Order Graphic
- Clears the OTB Turn Order graphics for the actor(s).
- The settings will revert to the Plugin Parameter settings.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

---

Enemy Plugin Commands

BattleSysOTB TurnOrderDisplay.png

---

BattleSysOTB Command4.png

Enemy: Change OTB Turn Order Icon
- Changes the icons used for the specific enemy(ies) on the OTB Turn Order.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

  Icon:
  - Changes the graphic to this icon.

---

BattleSysOTB Command5.png

Enemy: Change OTB Turn Order Face
- Changes the faces used for the specific enemy(ies) on the OTB Turn Order.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

  Face Name:
  - This is the filename for the target face graphic.

  Face Index:
  - This is the index for the target face graphic.

---

BattleSysOTB Command6.png

Enemy: Clear OTB Turn Order Graphic
- Clears the OTB Turn Order graphics for the enemy(ies).
- The settings will revert to the Plugin Parameter settings.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

---

System Plugin Commands

BattleSysOTB Preview.png

---

BattleSysOTB Command7.png

System: OTB Turn Order Visibility
- Determine the visibility of the OTB Turn Order Display.

  Visibility:
  - Changes the visibility of the OTB Turn Order Display.

---

Battle System - PTB VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

System Plugin Commands

BattleSys PTB Weakness.gif

---

BattleSys PTB Command1.png

System: PTB Press Count Visibility
- Determine the visibility of the PTB Press Count Display.

  Visibility:
  - Changes the visibility of the PTB Press Count Display.

---

Battle System - STB VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

BattleSysSTB TurnOrder.png


---

BattleSysSTB Command1.png

Actor: Change STB Turn Order Icon
- Changes the icons used for the specific actor(s) on the STB Turn Order.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Icon:
  - Changes the graphic to this icon.

---

BattleSysSTB Command2.png

Actor: Change STB Turn Order Face
- Changes the faces used for the specific actor(s) on the STB Turn Order.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Face Name:
  - This is the filename for the target face graphic.

  Face Index:
  - This is the index for the target face graphic.

---

BattleSysSTB Command3.png

Actor: Clear STB Turn Order Graphic
- Clears the STB Turn Order graphics for the actor(s).
- The settings will revert to the Plugin Parameter settings.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

---

Enemy Plugin Commands

BattleSysSTB TurnOrder.png

---

BattleSysSTB Command4.png

Enemy: Change STB Turn Order Icon
- Changes the icons used for the specific enemy(ies) on the STB Turn Order.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

  Icon:
  - Changes the graphic to this icon.

---

BattleSysSTB Command5.png

Enemy: Change STB Turn Order Face
- Changes the faces used for the specific enemy(ies) on the STB Turn Order.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

  Face Name:
  - This is the filename for the target face graphic.

  Face Index:
  - This is the index for the target face graphic.

---

BattleSysSTB Command6.png

Enemy: Clear STB Turn Order Graphic
- Clears the STB Turn Order graphics for the enemy(ies).
- The settings will revert to the Plugin Parameter settings.

  Enemy Index(es):
  - Select which enemy index(es) to affect.

---

System Plugin Commands

BattleSysSTB TurnOrder.png

---

BattleSysSTB Command7.png

System: STB Turn Order Visibility
- Determine the visibility of the STB Turn Order Display.

  Visibility:
  - Changes the visibility of the STB Turn Order Display.

---

Bright Effects VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Bloom Plugin Commands

---

Bloom: Change Settings
- Change the Bloom filter settings for the screen.

  Bloom Scale:
  - Change bloom scale for the screen.

  Bloom Brightness:
  - Change bloom brightness for the screen.

  Bloom Threshold:
  - Change bloom threshold for the screen.

  Shift Duration:
  - The amount of time it takes for the change to occur.

---

Bloom: Reset
- Reset the Bloom filter settings for the settings found in the Plugin
  Parameters or map notetags.

  Shift Duration:
  - The amount of time it takes for the reset to occur.

---

Blur Plugin Commands

BrightEffects Blur Preview.png

---

BrightEffects Blur Command1.png

Blur: Change Settings
- Change the Blur filter settings for the screen.

  Blur Strength:
  - Change blur strength for the screen.
  - For best results, use numbers between 0 and 5  where 0 is no blur and
    higher numbers mean higher blur strength.

  Blur Duration:
  - The amount of time it takes for the change to occur.

---

BrightEffects Blur Command2.png

Blur: Reset
- Clears the Blur filter.

  Blur Duration:
  - The amount of time it takes for the reset to occur.

---

Godray Plugin Commands

---

Godray: Change Settings
- Change the Godray filter settings for the screen.

  Visible?:
  - Show godrays on the screen?
  - Visibility changes are immediate.

  Godray Speed:
  - Change godray speed for the screen.

  Godray Gain:
  - Change godray gain for the screen.

  Godray Lacunarity:
  - Change godray lacunarity for the screen.

  Godray Angle:
  - Change godray angle for the screen.

  Shift Duration:
  - The amount of time it takes for the change to occur.
  - Visibility changes are immediate.

---

Godray: Reset
- Reset the Godray filter settings for the settings found in the Plugin
  Parameters or map notetags.

  Shift Duration:
  - The amount of time it takes for the reset to occur.
  - Visibility changes are immediate.

---

Color Adjust Plugin Commands

---

Color Adjust: Change Settings
- Change the Color Adjustment filter settings for the screen.

  Adjust Brightness:
  - Change color adjust brightness for the screen.

  Adjust Contrast:
  - Change color adjust contrast for the screen.

  Adjust Saturation:
  - Change color adjust saturation for the screen.

  Shift Duration:
  - The amount of time it takes for the change to occur.

---

Color Adjust: Reset
- Reset the Color Adjustment filter settings for the settings found in the
  Plugin Parameters or map notetags.

  Shift Duration:
  - The amount of time it takes for the reset to occur.

---

Tilt Shift Plugin Commands

BrightEffects TiltShift.png

---

Tilt Shift: Change Settings
- Change the Tilt Shift filter settings for the screen.

  Pixel Blur:
  - What is the default pixel blur amount for tilt shift?
  - Smaller = less blur. Higher = more blur.

  Gradient Blur:
  - What is the default gradient blur amount for tilt shift?
  - Smaller = less gradient. Higher = more gradient.

  Shift Duration:
  - The amount of time it takes for the change to occur.

---

Tilt Shift: Reset
- Reset the Tilt Shift filter settings for the settings found in the
  Plugin Parameters or map notetags.

  Shift Duration:
  - The amount of time it takes for the change to occur.

---

Button Common Events VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

System Plugin Commands

---

ButtonCommonEventsToolbar.png

VisuMZButtonCommonEventsCommand1.png

System: Change Button Common Event - Change the Common Event bound to specific key(s).

 Keys:
 - Select which key(s) to change.
 Common Event ID:
 - Change the Common Event bound to specific key(s).
 Button Icon:
 - What icon do you want to show on this button?

---

VisuMZButtonCommonEventsCommand2.png

System: Change Visibility - Determines whether or not buttons are shown on screen.

 Visible?
 - Show or hide the visible Button Common Events on the screen?

---

VisuMZButtonCommonEventsCommand3.png

System: Clear All Button Common Events - Clears Common Events from all keys.

---

VisuMZButtonCommonEventsCommand4.png

System: Clear Button Common Event - Clears any Common Events bound to specific key(s).

 Keys:
 - Select which key(s) to clear.

---

ButtonCommonEvents Update19 Command1.png

System: Clear Common Event ID(s) - Clears any keys with the marked Common Event ID(s).

 Common Event ID(s):
 - Clears any keys with the marked Common Event ID(s).

---

ButtonCommonEvents Update19 Command2.png

System: Run Stored Button Common Event - Run the Common Event stored on a specific key.

 Target Key:
 - Run the Common Event stored in this key.

---

Chain Battles VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Chain Battle Plugin Commands

ChainBattles Preview1.png

---

ChainBattles Command1.png

Chain Battle: Queue Troop ID(s)
- Setup the next Troop ID as a part of a chain battle.
- If there are multiple, one will be randomly picked.

  Troop ID(s):
  - Select which Troop ID(s) to register as the next potential battle.

  Change Battleback?:
  - Change the battlebacks for this queued battle?

    Battleback 1:
    Battleback 2:
    - Filename used for the battleback image.
    - Leave empty if you don't wish to use one.

---

ChainBattles Command2.png

Chain Battle: Queue Encounter Pool
- Setup the next battle from the random encounter pool.
- If there are multiple, one will be randomly picked.

  Change Battleback?:
  - Change the battlebacks for this queued battle?

    Battleback 1:
    Battleback 2:
    - Filename used for the battleback image.
    - Leave empty if you don't wish to use one.

---

ChainBattles Command3.png

Chain Battle: Queue JavaScript ID
- Use JavaScript to determine which Troop ID to queue up for a chain battle.

  JS: Troop ID:
  - Use JavaScript code to determine what Troop ID to queue up for a
    chain battle.

  Change Battleback?:
  - Change the battlebacks for this queued battle?

    Battleback 1:
    Battleback 2:
    - Filename used for the battleback image.
    - Leave empty if you don't wish to use one.

---

ChainBattles Command4.png

Chain Battle: Clear Chains
- Clears any stored Chain Battles, allowing the battle to end after
the current one.

---

Next Victory Plugin Commands

---

ChainBattles Update02 Command1.png

Next Victory: Queue Common Event
- Queue a Common Event(s) to run next victory.
- If multiple, Common Events run in queued order.
- The Common Events will run before the next queued chain battle.

  Common Event ID(s):
  - Select which Common Event(s) to run upon the next victory.
  - If multiple, Common Events run in queued order.

  - The "Next Victory: Queue Common Event" Plugin Command will always refer
    to the immediate next victory sequence.
    - Even if you put it after a "Chain Battle: Queue Troop ID(s)", it does
      not mean it will occur for that next queued troop's victory.
    - Instead, the common event will run for the immediate next victory
      sequence regardless.
    - If you would like for the queued troop ID's to have a "Next Victory"
      effect, run this Plugin Command AFTER the queued troop ID has been
      initiated in battle first.

  - If enemies revive in the middle of the Common Event queue, the queue is
    paused and resumed after the enemies are defeated once again.
    - For example:
    - Common Events A, B, C, D, E are queued.
    - Enemies are set to revive on Common Event B.
    - When the player achieves battle victory, Common Events A and B run.
    - The enemies will revive.
    - The player has to defeat the enemies again.
    - Once the enemies are defeated, Common Events C, D, and E then run.
    - Afterwards, any chain battles will occur.

---

ChainBattles Update02 Command2.png

Next Victory: Clear Common Event Queue
- Clear queued Common Event(s) for next victory.

---

Class Change System VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Unlock Class Plugin Commands

ClassChangeSys Unlocked.png

ClassChangeSys Command 01.png

---

Unlock Class: Add For Actor(s)
- Unlock class(es) for target actor(s).

  Actor ID(s):
  - Select which Actor ID(s) to unlock class(es) for.

  Class ID(s):
  - Select which Class ID(s) to be unlocked.

---

ClassChangeSys Command 02.png

Unlock Class: Add For Global
- Unlock class(es) for all party members.

  Class ID(s):
  - Select which Class ID(s) to be unlocked.

---

ClassChangeSys Command 03.png

Unlock Class: Remove From Actor(s)
- Remove unlock class(es) for target actor(s).

  Actor ID(s):
  - Select which Actor ID(s) to remove an unlocked class(es) for.

  Class ID(s):
  - Select which Class ID(s) to be removed from the unlocked status.

---

ClassChangeSys Command 04.png

Unlock Class: Remove From Global
- Remove unlock class(es) for all party members.

  Class ID(s):
  - Select which Class ID(s) to be removed from the unlocked status.

---

Change Restriction Plugin Commands

---

ClassChangeSys Command 05.png

Change Restriction: Add Tier Restriction
- Add restrictions to prevent class changing specific tier(s) to
  target actor(s).

  Actor ID(s):
  - Select which Actor ID(s) to restrict class tier(s) for.

  Tiers(s):
  - Select which class tier(s) to restrict changing for.

---

ClassChangeSys Command 06.png

Change Restriction: Remove Tier Restriction
- Remove restrictions to allow class changing specific tier(s) for
  target actor(s).

  Actor ID(s):
  - Select which Actor ID(s) to remove class tier(s) restrictions for.

  Tiers(s):
  - Select which class tier(s) to remove restrictions for.

---

Multiclass Plugin Commands

---

ClassChangeSys Command 07.png

Multiclass: Change Actor(s) Multiclass
- Changes a specific multiclass for target actor(s).

  Actor ID(s):
  - Select which Actor ID(s) to change the multiclass limit to.

  Tier:
  - Which multiclass tier to change for the target actor(s)?

  Class ID:
  - Which class should go into this multiclass tier slot?

---

ClassChangeSys Command 08.png

Multiclass: Raise Limit for Actor(s)
- Raise the multiclass limit for target actor(s).

  Actor ID(s):
  - Select which Actor ID(s) to change the multiclass limit to.

  Raise Limit By:
  - Raise the multiclass limit for target actor(s) by this much.

---

ClassChangeSys Command 09.png

Multiclass: Lower Limit for Actor(s)
- Lower the multiclass limit for target actor(s).

  Actor ID(s):
  - Select which Actor ID(s) to change the multiclass limit to.

  Reduce Limit By:
  - Lower the multiclass limit for target actor(s) by this much.

---

ClassChangeSys Command 10.png

Multiclass: Set Limit for Actor(s)
- Set multiclass limit for target actor(s).

  Actor ID(s):
  - Select which Actor ID(s) to change the multiclass limit to.

  Set Limit To:
  - Set multiclass limit for target actor(s) to this much.

---

Class Points Plugin Commands

---

ClassChangeSys Command 11.png

Class Points: Gain
- The target actor(s) gains Class Points.
- Gained amounts are affected by Class Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to gain Class Points for.
  - Use "0" for the current class.

  Class Points:
  - Determine how many Class Points will be gained.
  - You may use code.

---

ClassChangeSys Command 12.png

Class Points: Add
- The target actor(s) receives Class Points.
- Received amounts are NOT affected by Class Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to receive Class Points for.
  - Use "0" for the current class.

  Class Points:
  - Determine how many Class Points will be added.
  - You may use code.

---

ClassChangeSys Command 13.png

Class Points: Lose
- The target actor(s) loses Class Points.
- Lost amounts are NOT affected by Class Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to lose Class Points for.
  - Use "0" for the current class.

  Class Points:
  - Determine how many Class Points will be lost.
  - You may use code.

---

ClassChangeSys Command 14.png

Class Points: Set
- Changes the exact Class Points for the target actor(s).
- Changed amounts are NOT affected by Class Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to change Class Points for.
  - Use "0" for the current class.

  Class Points:
  - Determine how many Class Points will be set exactly to.
  - You may use code.

---

Job Points Plugin Commands

---

ClassChangeSys Command 15.png

Job Points: Gain
- The target actor(s) gains Job Points.
- Gained amounts are affected by Job Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to gain Job Points for.
  - Use "0" for the current class.

  Job Points:
  - Determine how many Job Points will be gained.
  - You may use code.

---

ClassChangeSys Command 16.png

Job Points: Add
- The target actor(s) receives Job Points.
- Received amounts are NOT affected by Job Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to receive Job Points for.
  - Use "0" for the current class.

  Job Points:
  - Determine how many Job Points will be added.
  - You may use code.

---

ClassChangeSys Command 17.png

Job Points: Lose
- The target actor(s) loses Job Points.
- Lost amounts are NOT affected by Job Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to lose Job Points for.
  - Use "0" for the current class.

  Job Points:
  - Determine how many Job Points will be lost.
  - You may use code.

---

ClassChangeSys Command 18.png

Job Points: Set
- Changes the exact Job Points for the target actor(s).
- Changed amounts are NOT affected by Job Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to change Job Points for.
  - Use "0" for the current class.

  Job Points:
  - Determine how many Job Points will be set exactly to.
  - You may use code.

---

System Plugin Commands

---

ClassChangeSys Command 19.png

System: Enable Class Change in Menu?
- Enables/disables Class Change inside the main menu.

  Enable/Disable?:
  - Enables/disables Class Change inside the main menu.

---

ClassChangeSys Command 20.png

System: Show Class Change in Menu?
- Shows/hides Class Change inside the main menu.

  Show/Hide?:
  - Shows/hides Class Change inside the main menu.

---

Combat Log VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Combat Log Plugin Commands

CombatLog Preview1.png

---

CombatLog Command1.png

Combat Log: Add Text
- Adds custom text to the current Combat Log.

  Text:
  - What text would you like to add to the Combat Log?

  Icon:
  - What icon would you like to bind to this entry?

---

CombatLog Command2.png

Combat Log: Add Horizontal Line
- Adds a horizontal line to the current Combat Log.

---

CombatLog Command3.png

Combat Log: Bypass Text?
- Temporarily bypass adding any new text to the Combat Log until this
  is turned off?

  Bypass?:
  - Bypass text from being added to the Combat Log temporarily?

---

CombatLog Command4.png

Combat Log: Hot Key Enable?
- Enables/disables the Combat Log hot key in battle?

  Enable?:
  - Enables/disables the Combat Log hot key in battle.

---

System Plugin Commands

---

CombatLog MenuAccess.png

CombatLog Command5.png

System: Show in Main Menu?
- Shows/hides CombatLog menu inside the Main Menu.

  Show/Hide?:
  - Shows/hides Combat Log command inside the Main Menu.
  - Note! This command will be disabled if the player does not have any
    Combat Logs recorded.

---

CombatLog PartyCommand.png

CombatLog Command6.png

System: Show in Party Command?
- Shows/hides CombatLog menu inside the Window_PartyCommand.

  Show/Hide?:
  - Shows/hides Combat Log command inside Window_PartyCommand.

---

CombatLog ActorCommand.png

CombatLog Command7.png

System: Show in Actor Command?
- Shows/hides CombatLog menu inside the Window_ActorCommand.

  Show/Hide?:
  - Shows/hides Combat Log command inside Window_ActorCommand.

---

Common Event Menu VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Common Event Menu Plugin Command

CommonEventMenu Layout 062 Standard Sub-Corner-List.png

CommonEventMenu Command1.png

This is the Plugin Command that lets you create the Common Event Menu. The Common Event Menu is inaccessible from any other way.

---

Common Event Menu: Start
- Start a Common Event Menu with the below settings.

  Common Events:
  - Select the Common Events you want shown in the menu.

    Cancel Event:
    - Runs this Common Event when Cancel is pressed.
    - Insert 0 to disable Cancel.

  Layout:
  - Pick a layout to use for the Common Event Menu.
  - Select "Custom" to position windows via JavaScript.
  - Picking '-' will not create any Common Event Menus.
  - Look on Yanfly.moe for a visual list of all the layouts.

    Custom Layout:
    - Modify the settings for a Custom layout.
    - Requires the above parameter to be "Custom".

  Optional Settings:
  - Optional settings for the Common Event Menu.

!! WARNING !!

Not all pre-made layouts work with all screen resolutions as this is very much so the case if you plan on using a smaller-than-normal screen resolution. If a specific layout does not work with a resolution you want, pick another layout that works. These layouts are made under the industry standard of a 16:9, 1280x720 screen resolution.

---

CommonEventMenu Command2.png

Common Events (Sub Settings)
- Select the Common Events you want shown in the menu.

  Specific ID's:

    ID(s):
    - Select the Common Events you want displayed in the menu based on their
      exact ID's.

  ID Range:

    Range Start:
    - Select the Common Event ID range to start from.
    - This will select all the ID's up to the end range.

    Range End:
    - Select the Common Event ID range to end with.
    - This will select all the ID's from the start range.

  JS:

    Custom JS:
    - Create a list of Common Event ID's with JavaScript.

  Filters:

    Empty Name:
    - Apply filter for Common Events without a name?

    ----- Name:
    - Apply filter for Common Events with ----- in their name?

---

CommonEventMenu Command3.png

Custom Layout (Sub Settings)
- Modify the settings for a Custom layout.
- Requires the above parameter to be "Custom".

  Main Windows:

    JS: List Window:
    JS: Picture Window:
    JS: Help Window:
    JS: Sub Window:
    - Determine how this Window is positioned.
    - Only applies with Custom layouts.

  Extra Windows:

    JS: Extra Window 1:
    JS: Extra Window 2:
    JS: Extra Window 3:
    JS: Extra Window 4:
    JS: Extra Window 5:
    JS: Extra Window 6:
    JS: Extra Window 7:
    JS: Extra Window 8:
    JS: Extra Window 9:
    JS: Extra Window 10:
    - Determine how this Extra Window is positioned.
    - Only applies with Custom layouts.

!! WARNING !!

These settings do NOT apply to Custom Layouts in order to reduce confusion for the game dev. If the game dev wishes to implement them in, then utilize Scene_Base's "isBottomHelpMode" and "isRightInputMode" functions when inserting the JavaScript code needed.

---

CommonEventMenu Command4.png

Optional Settings (Sub Settings)
- Optional settings for the Common Event Menu.

  All Windows:

    Background Type:
    - Select the background type for all of the Common Event Menu windows.
      - 0 - Window
      - 1 - Dim
      - 2 - Transparent

    Boundary Size:
    - Pick the boundary size for the layout.
    - Does NOT apply to Custom Layouts.
      - Full      (Game Screen)
      - UI Size   (UI Resolution)
      - Padded    (16 px Border)
      - Huge      (32 px Border)
      - Large     (48 px Border)
      - Medium    (64 px Border)
      - Small     (96 px Border)
      - Tiny      (128 px Border)
      - Micro     (160 px Border)
      - Wut       (192 px Border)

  List Window:

    List Columns:
    - The number of columns the List Window has.
    - Use 'auto' to determine it automatically.
    - You may use JavaScript.

    Auto Select:
    - Which Common Event should be selected at the start?
    - Use 'last' for last picked ID.
    - You may use JavaScript.

    Auto-Sort ID's:
    - Automatically sort the Common Event's inserted into the Plugin Command
      by their database ID's?
    - This only applies to the "Specific" and "Custom JS" list where the
      order of the ID's inserted can be controlled. "ID Range" settings are
      always going to be sorted by ID.
    - This can be disabled for those who wish to manually switch around the
      order of their displayed Common Event ID's.

    Text Alignment:
    - How do you want the text to be aligned for the List Window?

  Cancel Button:

    Show Cancel Button:
    - Show the Cancel Button?
    - Requires a Cancel Common Event.

    Button Scale:
    - Scale the button size by this much.

    Button Position:
    - Select where the button appears.

    Button Offset X:
    - Offset the Cancel Button X position by this much.

    Button Offset Y:
    - Offset the Cancel Button Y position by this much.

  Picture Window:

    Auto-Fit Image:
    - Automatically fit the picture to the size of the Picture Window if the
      picture is larger than the window?

    Image Anchor X:
    - Pick how the picture is anchored horizontally in the Picture Window.

    Image Anchor Y:
    - Pick how the picture is anchored vertically in the Picture Window.

---

Core Engine VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Animation Commands

CoreEngine PointAni.gif

CoreEngine Update53 Command1.png

Animation: Play at Coordinate
- Plays an animation on the screen at a specific x, y coordinate even if
  there is no sprite attached.

  Animation ID:
  - Plays this animation.

  Coordinates:

    X:
    Y:
    - X/Y coordinate used for the animation.
      You may use JavaScript code.

  Mirror Animation?:
  - Mirror the animation?

  Mute Animation?:
  - Mute the animation?

---

Audio Plugin Commands

---

CoreEngine Update103 Command1.png

Audio: Change Current BGM Volume
- Changes the current BGM volume without changing any of the current BGM's
  other properties and without restarting the BGM.

  Volume:
  - Change the current BGM's volume to what amount?
  - You may use JavaScript code.
  - Use numbers from 0 to 100.

---

CoreEngine Update103 Command2.png

Audio: Change Current BGM Pitch
- Changes the current BGM pitch without changing any of the current BGM's
  other properties and without restarting the BGM.

  Pitch:
  - Change the current BGM's pitch to what amount?
  - You may use JavaScript code.
  - Use numbers from 50 to 150.

---

CoreEngine Update103 Command3.png

Audio: Change Current BGM Pan
- Changes the current BGM pan without changing any of the current BGM's
  other properties and without restarting the BGM.

  Pan:
  - Change the current BGM's pan to what amount?
  - You may use JavaScript code.
  - Use numbers from -100 to 100.

---

CoreEngine Update103 Command4.png

Audio: Change Current BGM Volume
- Changes the current BGM volume without changing any of the current BGM's
  other properties and without restarting the BGM.

  Volume:
  - Change the current BGM's volume to what amount?
  - You may use JavaScript code.
  - Use numbers from 0 to 100.

---

CoreEngine Update103 Command5.png

Audio: Change Current BGM Pitch
- Changes the current BGM pitch without changing any of the current BGM's
  other properties and without restarting the BGM.

  Pitch:
  - Change the current BGM's pitch to what amount?
  - You may use JavaScript code.
  - Use numbers from 50 to 150.

---

CoreEngine Update103 Command6.png

Audio: Change Current BGM Pan
- Changes the current BGM pan without changing any of the current BGM's
  other properties and without restarting the BGM.

  Pan:
  - Change the current BGM's pan to what amount?
  - You may use JavaScript code.
  - Use numbers from -100 to 100.

---

Debug Plugin Commands

---

CoreEngine Update95 Command1.png

Debug: Current Controller ID
- PLAY TEST ONLY.
- Shows current controller ID in debug console.
- If you press a key on the keyboard, this data will be erased.
- Also copies to computer clipboard if possible.

---


Export Plugin Commands

CoreEngine Update39 Command1.png

---

Export: All Maps Text
- PLAY TEST ONLY. Exports all of the text from all maps,
  their events, event pages, and any associated Common Events.

  - Exports 'Show Text' event commands.
  - Exports 'Show Choices' event commands.
  - Exports 'Show Scrolling Text' event commands.
  - Exports 'Comments' event commands.
  - Only the raw text will be exported.
  - Only usable during Play Test.

---

Export: All Troops Text
- PLAY TEST ONLY. Exports all of the text from all troops,
  their event pages, and any associated Common Events.

  - Exports 'Show Text' event commands.
  - Exports 'Show Choices' event commands.
  - Exports 'Show Scrolling Text' event commands.
  - Exports 'Comments' event commands.
  - Only the raw text will be exported.
  - Only usable during Play Test.

---

Export: Current Map Text
- PLAY TEST ONLY. Exports all of the text on the current map,
  its events, the event pages, and any associated Common Events.

  - Exports 'Show Text' event commands.
  - Exports 'Show Choices' event commands.
  - Exports 'Show Scrolling Text' event commands.
  - Exports 'Comments' event commands.
  - Only the raw text will be exported.
  - Only usable during Play Test.
  - If not in battle, this Plugin Command will not work.

---

Export: Current Troop Text
- PLAY TEST ONLY. Exports all of the text on the current troop,
  the troop's event pages, and any associated Common Events.

  - Exports 'Show Text' event commands.
  - Exports 'Show Choices' event commands.
  - Exports 'Show Scrolling Text' event commands.
  - Exports 'Comments' event commands.
  - Only the raw text will be exported.
  - Only usable during Play Test.
  - If not in battle, this Plugin Command will not work.

---

Game Plugin Commands

---

CoreEnginePluginCommand01.png

Game: Open URL
- Opens a website URL from the game.

  URL:
  - Where do you want to take the player?

---

Gold Plugin Commands

---

CoreEnginePluginCommand02.png

Gold: Gain/Lose
- Allows you to give/take more gold than the event editor limit.

  Value:
  - How much gold should the player gain/lose?
  - Use negative values to remove gold.

---

Map Plugin Commands

---

Map: Once Parallel
- Plays a Common Event parallel to the event once without repeating itself
  when done.
- Map only!

  Common Event ID:
  - The ID of the parallel Common Event to play.
  - Does NOT repeat itself when finished.
  - When exiting map scene or changing maps, all Once Parallels are cleared.
  - Once Parallels are not retained upon reentering the scene or map.
  - Once Parallels are not stored in memory and cannot be saved.

---

Picture Plugin Commands

---

CoreEngine PictureCoordinates2.gif

Picture: Coordinates Mode
- Play Test Mode only! Gets the coordinates of a specific picture as you
  move it across the screen.

  Picture ID:
  - The ID of the pictures to track the coordinates of.

---

CoreEnginePluginCommand03.png

CoreEnginePluginCommand03a.png

Picture: Easing Type
- Changes the easing type to a number of options.

  Picture ID:
  - Which picture do you wish to apply this easing to?

  Easing Type:
  - Select which easing type you wish to apply.

  Instructions:
  - Insert this Plugin Command after a "Move Picture" event command.
  - Turn off "Wait for Completion" in the "Move Picture" event.
  - You may have to add in your own "Wait" event command after.

---

CoreEngine Update43 Command2.png

Picture: Erase All
- Erases all pictures on the screen because it's extremely tedious to do it
  one by one.

---

CoreEngine Update43 Command3.png

Picture: Erase Range
- Erases all pictures within a range of numbers because it's extremely
  tedious to do it one by one.

  Starting ID:
  - The starting ID of the pictures to erase.

  Ending ID:
  - The ending ID of the pictures to erase.

---

CoreEngine Update128 Command1.png

Picture: Rotate by Angle
- Rotates target picture by a amount angle over a set duration instead of
  continuously.

  Picture ID Number:
  - What is the ID of the picture you wish to rotate?
  - Use a number between 1 and 100.
  - You may use JavaScript code.

  Adjust Angle:
  - What is the angle you wish to rotate the picture by?
  - Use degrees (360 degrees per full rotation).
  - You may use JavaScript code.

  Easing Type:
  - Select which easing type you wish to apply.

  Duration:
  - Duration of rotation effect in frames.
  - 60 frames = 1 second.
  - You may use JavaScript code.

  Wait for Completion:
  - Wait until completion before moving onto the next event?

---

CoreEngine Update128 Command2.png

Picture: Rotate to Angle
- Rotates target picture to a certain angle over a set duration
  instead of continuously.

  Picture ID Number:
  - What is the ID of the picture you wish to rotate?
  - Use a number between 1 and 100.
  - You may use JavaScript code.

  Target Angle:
  - What is the target angle you wish to rotate the picture?
  - Use degrees (360 degrees per full rotation).
  - You may use JavaScript code.

  Easing Type:
  - Select which easing type you wish to apply.

  Duration:
  - Duration of rotation effect in frames.
  - 60 frames = 1 second.
  - You may use JavaScript code.

  Wait for Completion:
  - Wait until completion before moving onto the next event?
<pre>

---

[[File:CoreEngine_Update43_Command1.png]]

[[File:CoreEngine_Update43_Command1_Ani2.gif]]

<pre>
Picture: Show Icon
- Shows an icon instead of a picture image.
- The picture icon can be controlled like any other picture.

  General:

    Picture ID Number:
    - What is the ID of the picture you wish to show at?
    - Use a number between 1 and 100.
    - You may use JavaScript code.

    Icon Index:
    - Select the icon index to use for this picture.
    - You may use JavaScript code.

    Smooth Icon?:
    - This will make the icon smoothed out or pixelated.

  Picture Settings:

    Position:

      Origin:
      - What is the origin of this picture icon?
        - Upper Left
        - Center

      Position X:
      - X coordinate of the picture.
      - You may use JavaScript code.

      Position Y:
      - Y coordinate of the picture.
      - You may use JavaScript code.

    Scale:

      Width %:
      - Horizontal scale of the picture.
      - You may use JavaScript code.
      - 100 is 100%

      Height %:
      - Vertical scale of the picture.
      - You may use JavaScript code.
      - 100 is 100%

    Blend:

      Opacity:
      - Insert a number to determine opacity level.
      - Use a number between 0 and 255.
      - You may use JavaScript code.

      Blend Mode:
      - What kind of blend mode do you wish to apply to the picture?

---

Screen Shake Plugin Commands

---

CoreEngineCommandScreenShake.png

Screen Shake: Custom:
- Creates a custom screen shake effect and also sets the following uses of
  screen shake to this style.

  Shake Style:
  - Select shake style type.
  - Original
  - Random
  - Horizontal
  - Vertical

  Power:
  - Power level for screen shake.

  Speed:
  - Speed level for screen shake.

  Duration:
  - Duration of screenshake.
  - You can use code as well.

  Wait for Completion:
  - Wait until completion before moving onto the next event?

---

Switch Plugin Commands

---

Switches: Randomize ID(s)
- Select specific Switch ID's to randomize ON/OFF.

  Switch ID(s):
  - Select which Switch ID(s) to toggle.

  Chance for ON:
  - Chance out of 100 that determines the switches to be ON.

---

Switches: Randomize Range
- Select specific Switch ID Range to randomize ON/OFF.
- The ratio determines the ON/OFF distribution.

  Starting ID:
  - The starting ID of the Switch to toggle.

  Ending ID:
  - The ending ID of the Switch to toggle.

  Chance for ON:
  - Chance out of 100 that determines the switches to be ON.

---

Switches: Toggle ID(s)
- Select specific Switch ID's to toggle ON/OFF.
- ON becomes OFF. OFF becomes ON.

  Switch ID(s):
  - Select which Switch ID(s) to toggle.

---

Switches: Toggle Range
- Select specific Switch ID Range to toggle ON/OFF.
- ON becomes OFF. OFF becomes ON.

  Starting ID:
  - The starting ID of the Switch to toggle.

  Ending ID:
  - The ending ID of the Switch to toggle.

---

System Plugin Commands

---

CoreEngine Update5 Command1.png

System: Battle System Change
- Switch to a different battle system in-game.

  Change To:
  - Choose which battle system to switch to.
    - Database Default (Use game database setting)
    - -
    - DTB: Default Turn Battle
    - TPB Active: Time Progress Battle (Active)
    - TPB Wait: Time Progress Battle (Wait)
    - -
    - BTB: Brave Turn Battle (Req VisuMZ_2_BattleSystemBTB)
    - CTB: Charge Turn Battle (Req VisuMZ_2_BattleSystemCTB)
    - OTB: Order Turn Battle (Req VisuMZ_2_BattleSystemOTB)
    - STB: Standard Turn Battle (Req VisuMZ_2_BattleSystemSTB)

---

CoreEngine Update14 Command1.png

System: Load Images
- Allows you to (pre) load up images ahead of time.

  img/animations/:
  img/battlebacks1/:
  img/battlebacks2/:
  img/enemies/:
  img/faces/:
  img/parallaxes/:
  img/pictures/:
  img/sv_actors/:
  img/sv_enemies/:
  img/system/:
  img/tilesets/:
  img/titles1/:
  img/titles2/:
  - Which files do you wish to load from this directory?

---

CoreEnginePluginCommand04.png

System: Main Font Size
- Set the game's main font size.

  Change To:
  - Change the font size to this number.

---

CoreEnginePluginCommand05.png

System: Side View Battle
- Switch between Front View or Side View for battle.

  Change To:
  - Choose which view type to switch to.

---

CoreEnginePluginCommand07.png

System: Window Padding
- Change the game's window padding amount.

  Change To:
  - Change the game's standard window padding to this value.

---

Text Popup Command

CoreEngine TextPopup.png

---

CoreEngine TextPopupCmd.png

Text Popup: Show Text
- Adds text to a text popup window to briefly appear.
- Multiple text popups will be queued.
- Does not halt the game and works parallel to game activity.

  Text:
  - Write the text that you want to appear here.
  - You may use text codes.

---

Variable Plugin Commands

---

CoreEngine Update89 Command1.png

Variable: JS Eval
- Pick a variable ID and value to alter through JS.
- Allows one line of code for variable ID and operand.
- Functions like RM2k3's Variable Pointers.

  Variable ID:
  - This is the target variable to alter.
  - You may use JavaScript.
  - ie: $gameVariables.value(1)

  Operation Type:
  - What operation do you wish to use for this Plugin Command?

  Operand Modifier:
  - Value to be used in calculating the target variable.
  - You may use JavaScript.
  - ie: $gameVariables.value(1)

---

CoreEngine Update89 Command2.png

Variable: JS Block
- Pick a variable ID and value to alter through JS.
- Allows JS block code for variable ID and operand.
- Functions like RM2k3's Variable Pointers.

  Variable ID:
  - This is the target variable to alter.
  - You may use JavaScript.
  - ie: $gameVariables.value(1)

  Operation Type:
  - What operation do you wish to use for this Plugin Command?

  Operand Modifier:
  - Value to be used in calculating the target variable.
  - You may use JavaScript.
  - ie: $gameVariables.value(1)

---

Dragonbones Union VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Battler Plugin Commands

---

DragonBonesUnionPluginCommand01.png

Battler: Actor Change Settings
- Change target actor's Dragonbones armature settings for battle.

  Actor ID:
  - Select which Actor ID to affect.

    Filename:
    - Change the armature's filename.

    Offset X:
    - Change the armature's Offset X value.

    Offset Y:
    - Change the armature's Offset Y value.

    Scale X:
    - Change the armature's Scale X value.

    Scale Y:
    - Change the armature's Scale Y value.

    Time Scale:
    - Change the armature's Time Scale value.

    Width:
    - Change the battler width size.

    Height:
    - Change the battler height size.

  Motion Settings:

    Walk:
    Wait:
    Chant:
    Guard:
    Damage:
    Evade:
    Thrust:
    Swing:
    Missile:
    Skill:
    Spell:
    Item:
    Escape:
    Victory:
    Dying:
    Abnormal:
    Sleep:
    Dead:
    - Change the animation used for this motion.

---

Map Sprite Plugin Commands

---

DragonbonesMapPlayer.gif

DragonBonesUnionPluginCommand02.png

Map Sprite: Actor Change Settings
- Change target actor's Dragonbones armature settings for map sprites.

  Actor ID:
  - Select which Actor ID to affect.

    Filename:
    - Change the armature's filename.

    Offset X:
    - Change the armature's Offset X value.

    Offset Y:
    - Change the armature's Offset Y value.

    Scale X:
    - Change the armature's Scale X value.

    Scale Y:
    - Change the armature's Scale Y value.

    Time Scale:
    - Change the armature's Time Scale value.

      Walk Rate:
      - Change the armature's walk animation rate.

      Dash Rate:
      - Change the armature's dash animation rate.

    Width:
    - Change the battler width size.

    Height:
    - Change the battler height size.

  Flip Settings:

    Flip Left?:
    Flip Right:
    - Flip the scale x value when facing left/right-ward directions?

  Motion Settings:

    Idle:
    Walk:
    Dash:
    Jump:
    Ladder (Idle):
    Ladder (Climb):
    Rope (Idle):
    Rope (Climb):
    - Base rope climbing animation name used.

---

DragonBonesAnimate.gif

DragonBonesUnionPluginCommand03.png

Map Sprite: Actor Play Animation
- Target actor plays a custom Dragonbones animation.

  Actor ID:
  - Select which Actor ID to affect.

  Play Animation:
  - Play this animation.

NOTE: An alternative to this is to put the following code inside of a
      Movement Route's script call:

      this.dragonbonesAnimation = "AnimationName";

      Replace 'AnimationName' (keep the quotes) with the name of the
      Dragonbones animation.

---

DragonBonesUnionPluginCommand04.png

Map Sprite: Actor Stop Animation
- Stops a target actor's custom Dragonbones animation.

  Actor ID:
  - Select which Actor ID to affect.

---

DragonBonesAnimate.gif

DragonBonesUnionPluginCommand05.png

Map Sprite: Event Play Animation
- Target event plays a custom Dragonbones animation.

  Event ID:
  - Select which Event ID to affect.

  Play Animation:
  - Play this animation.

---

DragonBonesUnionPluginCommand06.png

Map Sprite: Event Stop Animation
- Stops a target event's custom Dragonbones animation.

  Event ID:
  - Select which Event ID to affect.

---

DragonBonesUnionPluginCommand07.png

Map Sprite: Follower Play Animation
- Target follower plays a custom Dragonbones animation.

  Follower Index:
  - Select which Follower Index to affect.

  Play Animation:
  - Play this animation.

---

DragonBonesUnionPluginCommand08.png

Map Sprite: Follower Stop Animation
- Stops a target follower's custom Dragonbones animation.

  Follower ID:
  - Select which Follower Index to affect.

---

DragonBonesUnionPluginCommand09.png

Map Sprite: Player Play Animation
- Player plays a custom Dragonbones animation.

  Play Animation:
  - Play this animation.

---

DragonBonesUnionPluginCommand10.png

Map Sprite: Player Stop Animation
- Stops player's custom Dragonbones animation.

---

Picture Plugin Commands

---

DragonBonesUnionPluginCommand11.png

Picture: Dragonbones Setup
- Setup a Dragonbones armature for a picture.

  Picture ID:
  - Select which Picture ID(s) to give a Dragonbones armature.

  Armature Filename:
  - What is the armature's filename?

  Play Animation:
  - Play this animation once it starts.

  Offset: X:
  - Default X offset value for this Dragonbones armature.

  Offset: Y:
  - Default Y offset value for this Dragonbones armature.

  Scale: X:
  - Default X scaling for this Dragonbones armature.
  - This will be amplified by the picture's scaling value.

  Scale: Y:
  - Default Y scaling for this Dragonbones armature.
  - This will be amplified by the picture's scaling value.

  Time Scale:
  - Default time scale for this Dragonbones armature.
  - Higher values play faster. Lower values play slower.

---

DragonBonesUnionPluginCommand12.png

Picture: Play Dragonbones Animation
- Make an existing Dragonbones armature attached to a picture play
  an animation.

  Picture ID:
  - Select which Picture ID to modify.

  Play Animation:
  - Play this animation.

  Finish: Revert Idle:
  - Revert animation to 'idle' animation after finishing?

---

DragonBonesUnionPluginCommand13.png

Picture: Offset Dragonbones
- Offset the X, Y attachment point of the Dragonbones armature.

  Picture ID:
  - Select which Picture ID to modify.

  Offset: X:
  - X offset value for this Dragonbones armature.

  Offset: Y:
  - Y offset value for this Dragonbones armature.

---

DragonBonesUnionPluginCommand14.png

Picture: Scale Dragonbones
- Change the scaling values of the Dragonbones armature.

  Picture ID:
  - Select which Picture ID to modify.

  Scale: X:
  - X scaling for this Dragonbones armature.
  - This will be amplified by the picture's scaling value.

  Scale: Y:
  - Y scaling for this Dragonbones armature.
  - This will be amplified by the picture's scaling value.

---

DragonBonesUnionPluginCommand15.png

Picture: Time Scale Dragonbones
- Change the speed at which Dragonbones animations play.

  Picture ID:
  - Select which Picture ID to modify.

  Time Scale:
  - Time scale for this Dragonbones armature.
  - Higher values play faster. Lower values play slower.

---

Elements and Status Menu Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

---

ElementStatusMenuCoreBios.png

ElementsStatusMenuCorePluginCommand01.png

Actor: Change Biography (Group)
Actor: Change Biography (Range)
Actor: Change Biography (JS)
- Changes the biography of the selected actor(s).
- Each version has a different means of selecting Actor ID's.

  Step 1: Target ID
  - Select which Actor ID(s) to affect.

  Step 2: Biography
  - Change the biography for target actor(s) to this.
  - Text codes allowed.
  - %1 - Actor's name.

---

ElementStatusMenuCoreTraitSets.png

ElementsStatusMenuCorePluginCommand04.png

Actor: Change Trait Sets (Group)
Actor: Change Trait Sets (Range)
Actor: Change Trait Sets (JS)
- Changes the Trait Set(s) of the selected actor(s).
- Each version has a different means of selecting Actor ID's.

  Step 1: Target ID
  - Select which Actor ID(s) to affect.

  Step 2: Change Trait Set
  - Element
  - SubElement
  - Gender
  - Race
  - Nature
  - Alignment
  - Blessing
  - Curse
  - Zodiac
  - Variant
    - Change to the name of the Trait Set to switch actor(s) to.
    - "Unchanged" to leave alone.
    - "Random" to randomize.
      - Random will use the random pool dictated by the Plugin Parameters
        and the Trait Set weights determined there as well.

---

Enemy Plugin Commands

---

ElementsStatusMenuCoreVariants.png

ElementsStatusMenuCorePluginCommand07.png

Enemy: Change Trait Sets (Group)
Enemy: Change Trait Sets (Range)
Enemy: Change Trait Sets (JS)
- Changes the Trait Set(s) of the selected enemy(ies).
- Each version has a different means of selecting Enemy Indexes.

  Step 1: Target ID
  - Select which Enemy Index(es) to affect.

  Step 2: Change Trait Set
  - Element
  - SubElement
  - Gender
  - Race
  - Nature
  - Alignment
  - Blessing
  - Curse
  - Zodiac
  - Variant
    - Change to the name of the Trait Set to switch target(s) to.
    - "Unchanged" to leave alone.
    - "Random" to randomize.
      - Random will use the random pool dictated by the Plugin Parameters
        and the Trait Set weights determined there as well.

---

Encounter Effects VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Advantage Plugin Commands

---

EncounterEffects Preemptive.png

EncounterEffects Command1.png

Advantage: Add to Queue
- Add (at the end) to the existing advantage queue the following encounter
 advantages for the upcoming battles.

  Queue:
  - Add to the queue the following advantage options for the
    upcoming battles.
    - Preemptive (Player gains turn advantage)
    - Surprise (Enemies gain turn advantage)
    - No Advantage (Neither party has advantage)
    - Chance (Random encounter advantage chance)

---

EncounterEffects Surprise.png

EncounterEffects Command2.png

Advantage: Set Queue
- Declare the exact advantage queue for the upcoming battles.

  Queue:
  - Add to the queue the following advantage options for the
    upcoming battles.
    - Preemptive (Player gains turn advantage)
    - Surprise (Enemies gain turn advantage)
    - No Advantage (Neither party has advantage)
    - Chance (Random encounter advantage chance)

---

EncounterEffects Command3.png

Advantage: Reset Queue
- Resets the advantage queue for battles.

---

Alert Plugin Commands

EncounterEffects Command4.png

---

Alert: Stealth Mode
- Changes the stealth mode setting for the player.

  Stealth Mode:
  - If Stealth Mode is on, bypass unnoticed alerts.
  - Already alerted events will stay alert.

---

Enemy Levels VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Enemy-Related Plugin Commands

---

EnemyLevels Command1.png

Enemy: Change Level
- Change target enemy(ies) level by a value.

  Enemy Index(es):
  - Select which enemy(ies) to affect.

  Level:
  - Changes level by this value.
  - You may use JavaScript code.

  Bypass Resist?:
  - Bypasses <Resist Level Change> effect?

---

EnemyLevels Command2.png

Enemy: Reset Level
- Reset target enemy(ies) level to its original level.

  Enemy Index(es):
  - Select which enemy(ies) to affect.

  Bypass Resist?:
  - Bypasses <Resist Level Change> effect?

---

EnemyLevels Command3.png

Enemy: Set Level
- Set target enemy(ies) level to a specific value.

  Enemy Index(es):
  - Select which enemy(ies) to affect.

  Level:
  - Sets level to this value.
  - You may use JavaScript code.

  Bypass Resist?:
  - Bypasses <Resist Level Change> effect?

---

Debug-Related Plugin Commands

EnemyLevel StatView.png

---

EnemyLevels Command4.png

DEBUG: View Level Stats
- View the stats of specific enemies for each level.
- This will appear in the Debug Console.

  Enemy Index(es):
  - Select which enemy(ies) to view.

---

Enhanced TP System VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

EnhancedTP Preview2.png

---

EnhancedTP Command1.png

Actor: Change TP Mode
- Changes target actor(s) TP Mode.

  Actor ID(s):
  - Select which actor(s) to affect.

  TP Mode Name:
  - Change to this TP Mode for selected actor(s).

---

EnhancedTP Command2.png

Actor: Unlock TP Mode
- Unlocks TP Modes for target actor(s).

  Actor ID(s):
  - Select which actor(s) to affect.

  TP Modes:
  - Change to this TP Mode for selected actor(s).

---

EnhancedTP Command3.png

Actor: Unlock All TP Modes
- Unlocks all TP Modes for target actor(s).

  Actor ID(s):
  - Select which actor(s) to affect.

---

Enemy Plugin Commands

EnhancedTP Command4.png

---

Enemy: Change TP Mode
- Changes target enemy(ies) TP Mode.

  Enemy Index(es):
  - Select which enemy(ies) to affect.

  TP Mode Name:
  - Change to this TP Mode for selected enemy(ies).

---

System Plugin Commands

EnhancedTP Preview1.png

EnhancedTP Command5.png

---

System: Show/Hide TP Mode
- Shows/Hides TP Mode from Scene_Skill.

  Show TP Mode?:
  - Shows/Hides TP Mode in Scene_Skill.

---

Events and Movement Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Auto Movement Plugin Commands

---

ZaWarudo.gif

EventsMoveCore PluginCommand 1.png

Auto Movement: Events
- Allow/stop events from auto movement.

  Value:
  - Allow events to move automatically?

---

Call Event Plugin Commands

---

EventsMoveCore PluginCommand 2.png


Call Event: Remote Read
- Runs the page of a different event remotely.
- This will run the page of the target event on the CURRENT event.
- This means that any "This Event" commands will be applied to the event
  using this Plugin Command and NOT the target event that page data is being
  retrieved from.
- Think of it as the current event using the target called event as a
  Common Event ala how RPG Maker 2003 works (for those familiar with it).

  Map ID:
  - Target event's map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the event to remotely run.
  - Use 0 for current event.
  - You may use JavaScript code.

  Page ID:
  - The page of the remote event to run.
  - You may use JavaScript code.

---

Dash Plugin Commands

---

EventsMoveCore PluginCommand 3.png

Dash Enable: Toggle
- Enable/Disable Dashing on maps.

  Value:
  - What do you wish to change dashing to?

---

Event Icon Plugin Commands

---

EventsMoveCoreIcon.png

EventsMoveCore PluginCommand 4.png

Event Icon: Change (Temporary)
- Change the icon that appears on an event.
- This change is temporary and resets upon new events.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Icon Index:
  - Icon index used for the icon.
  - You may use JavaScript code.

  Buffer X:
  - How much to shift the X position by?
  - You may use JavaScript code.

  Buffer Y:
  - How much to shift the Y position by?
  - You may use JavaScript code.

  Blend Mode:
  - What kind of blend mode do you wish to apply to the icon sprite?

---

Event Icon: Change (Forced)
- Change the icon that appears on an event.
- This change is forced and needs to be restored.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Icon Index:
  - Icon index used for the icon.
  - You may use JavaScript code.

  Buffer X:
  - How much to shift the X position by?
  - You may use JavaScript code.

  Buffer Y:
  - How much to shift the Y position by?
  - You may use JavaScript code.

  Blend Mode:
  - What kind of blend mode do you wish to apply to the icon sprite?

---

EventsMoveCore PluginCommand 5.png

Event Icon: Delete
- Delete the icon that appears on an event.
- This will remain deleted and invisible for events.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

---

Event Icon: Restore
- Restores a deleted or forced icon that appears on an event.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

---

Event Label Plugin Commands

---

EventsMoveCoreLabel.png

EventsMoveCore PluginCommand 6.png

Event Label: Refresh
- Refresh all Event Labels on screen.
- This is used to refresh page conditions for map changes that don't
  force a refresh.

---

EventsMoveCore PluginCommand 7.png

Event Label: Visible
- Change the visibility of Event Labels.

  Visibility:
  - What do you wish to change visibility to?

---

Event Location Plugin Commands

---

EventsMoveCore PluginCommand 8.png

Event Location: Save
- Memorize an event's map location so it reappears there the next time the
  map is loaded.

  Event ID:
  - The ID of the target event.
  - You may use JavaScript code.

---

EventsMoveCore PluginCommand 9.png

Event Location: Delete
- Deletes an event's saved map location.
- The event will reappear at its default location.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

---

EventsMoveCore PluginCommand 10.png

Event Location: Create
- Creates a custom spawn location for a specific map's event so it appears
  there the next time the map is loaded.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  X Coordinate:
  - The X coordinate of the event.
  - You may use JavaScript code.

  Y Coordinate:
  - The Y coordinate of the event.
  - You may use JavaScript code.

  Direction:
  - The direction the event will be facing.

  Optional:

    Page ID:
    - The page of the event to set the move route to.
    - You may use JavaScript code.

    Move Route Index:
    - The point in the move route for this event to be at if the page ID
      matches the rest of the page conditions.

---

Event Popup Plugin Commands

EventsMoveCore Update132 Preview.gif


EventPopupTut 4.gif
Event Popup Tips and Tricks by Arisu

2023 December 15

Since the version 1.55 update of Events and Movement Core, you can use the new Plugin Command called "Event Popup", which creates text above specific targets like the player character or an event, and move it. This feature is made by none other than yours truly, Arisu! There's many applications in which this can be used, but only if you change the way it's used. Let's take a look at them! This article will show you how to use popups to display Quick Messages, indicate Obtained Items, giving gifts to NPC's, and throwing items across the map.



---

Event Popup: Player
- Makes a centered event popup on the player sprite.
- Requires VisuMZ_1_MessageCore!
- Cannot be used in battle!

  Message Text:
  - Insert the text to be displayed.
  - Text codes can be used.

  Message Duration:
  - What is the frame duration of the event popup?
  - 60 frames = 1 second. You may use code.

  Popup Settings:
  - These settings let you adjust how the popup animates.
  - See "Popup Settings" section below.

---

Event Popup: Follower
- Makes a centered event popup on target follower sprite.
- Requires VisuMZ_1_MessageCore!
- Cannot be used in battle!

  Follower Index:
  - Which follower index to play popup?
  - Index starts at 0.
  - You may use JavaScript code.

  Message Text:
  - Insert the text to be displayed.
  - Text codes can be used.

  Message Duration:
  - What is the frame duration of the event popup?
  - 60 frames = 1 second.
  - You may use code.

  Popup Settings:
  - These settings let you adjust how the popup animates.
  - See "Popup Settings" section below.

---

Event Popup: Event
- Makes a centered event popup on target event sprite.
- Requires VisuMZ_1_MessageCore!
- Cannot be used in battle!

  Event ID:
  - The ID of the event to play popup on.
  - Use 0 for current event.
  - You may use JavaScript code.

  Message Text:
  - Insert the text to be displayed.
  - Text codes can be used.

  Message Duration:
  - What is the frame duration of the event popup?
  - 60 frames = 1 second. You may use code.

  Popup Settings:
  - These settings let you adjust how the popup animates.
  - See "Popup Settings" section below.

---

Event Popup: Target Tile
- Makes a centered event popup on target tile.
- Requires VisuMZ_1_MessageCore!
- Cannot be used in battle!

  Map Tile X:
  Map Tile Y:
  - The x/y coordinate of the map tile.
  - You may use JavaScript code.

  Message Text:
  - Insert the text to be displayed.
  - Text codes can be used.

  Message Duration:
  - What is the frame duration of the event popup?
  - 60 frames = 1 second. You may use code.

  Popup Settings:
  - These settings let you adjust how the popup animates.
  - See "Popup Settings" section below.

---

Popup Settings

  Fade Settings:

    Fade In Duration:
    - How many frames does it take to fade in?
    - 60 frames = 1 second.

    Fade Out Duration:
    - How many frames does it take to fade out?
    - 60 frames = 1 second.

  Offset Settings:

    Starting Offset X:
    - Offsets the starting x position.
    - Negative: left. Positive: right.
    - You may use code.

    Starting Offset Y:
    - Offsets the starting y position.
    - Negative: up. Positive: down.
    - You may use code.

    Ending Offset X:
    - Offsets the ending x position.
    - Negative: left. Positive: right.
    - You may use code.

    Ending Offset Y:
    - Offsets the ending y position.
    - Negative: up. Positive: down.
    - You may use code.

  Scaling Settings:

    Starting Scale X:
    - What is the starting scale x?
    - 0.0 = 0%, 0.5 = 50%, 1.0 = 100%
    - You may use code.

    Starting Scale Y:
    - What is the starting scale y?
    - 0.0 = 0%, 0.5 = 50%, 1.0 = 100%
    - You may use code.

    Ending Scale X:
    - What is the ending scale x?
    - 0.0 = 0%, 0.5 = 50%, 1.0 = 100%
    - You may use code.

    Ending Scale Y:
    - What is the ending scale y?
    - 0.0 = 0%, 0.5 = 50%, 1.0 = 100%
    - You may use code.

  Angle Settings:

    Starting Offset Angle:
    - What is the starting angle offset?
    - Use numbers between 0 and 360.
    - You may use code.

    Ending Offset Angle:
    - What is the ending angle offset?
    - Use numbers between 0 and 360.
    - You may use code.

  Misc Settings:

    Arc Peak:
    - This is the height of the popup's trajectory arc in pixels.
    - Positive: up. Negative: down.
    - You may use code.

---

Event Timer Plugin Commands

---

EventsMoveCore Update25 Command1.png

Event Timer: Change Speed
- Changes the timer frame decrease (or increase) speed.

  Speed:
  - How many 1/60ths of a second does each frame increase or decrease by?
  - Negative decreases.
  - Positive increases.
  - JavaScript allowed.

---

EventsMoveCore Update25 Command2.png

Event Timer: Expire Event Assign
- Sets a Common Event to run upon expiration.
- Bypasses the default code if one is set.

  Common Event ID:
  - Select the Common Event to run upon the timer's expiration.

---

EventsMoveCore Update25 Command3.png

Event Timer: Expire Event Clear
- Clears any set to expire Common Event and instead, run the default
  Game_Timer expiration code.

---

EventsMoveCore Update25 Command4.png

Event Timer: Frames Gain
- Chooses how many frames, seconds, minutes, or hours are gained or lost for
  the event timer.

  Frames:
  - How many 1/60ths of a second are gained/lost?
  - Positive for gain.
  - Negative for lost.
  - JavaScript allowed.

  Seconds:
  - How many seconds are gained/lost?
  - Positive for gain.
  - Negative for lost.
  - JavaScript allowed.

  Minutes:
  - How many minutes are gained/lost?
  - Positive for gain.
  - Negative for lost.
  - JavaScript allowed.

  Hours:
  - How many hours are gained/lost?
  - Positive for gain.
  - Negative for lost.
  - JavaScript allowed.

---

EventsMoveCore Update25 Command5.png

Event Timer: Frames Set
- Chooses how many frames, seconds, minutes, or hours are set for the event
  timer.

  Frames:
  - Set frame count to this value.
  - Each frame is 1/60th of a second.
  - JavaScript allowed.

  Seconds:
  - Set seconds to this value.
  - JavaScript allowed.

  Minutes:
  - Set minutes to this value.
  - Each minute is 60 seconds.
  - JavaScript allowed.

  Hours:
  - Set hours to this value.
  - Each hour is 60 minutes.
  - JavaScript allowed.

---

EventsMoveCore Update25 Command6.png

Event Timer: Pause
- Pauses the current event timer, but does not stop it.

---

EventsMoveCore Update25 Command7.png

Event Timer: Resume
- Resumes the current event timer from the paused state.

---

Follower Control Plugin Commands

---

EventsMoveCore Update18 Command1.png

Follower: Set Global Chase
- Disables all followers from chasing the player or reenables it.

  Chase:
  - Sets all followers to chase the player or not.

---

EventsMoveCore Update18 Command2.png

Follower: Set Target Chase
- Disables target follower from chasing the player or reenables it.

  Follower ID:
  - Select which follower ID to disable/reenable chasing for.

  Chase:
  - Sets target follower to chase its target or not.

---

EventsMoveCore Update18 Command3.png

Follower: Set Control
- Sets the event commands to target a follower when "Player" is selected as
  the target.

  Follower ID:
  - Select which follower ID to control.
  - 0 is the player.

---

EventsMoveCore Update18 Command4.png

Follower: Reset
- Resets all follower controls. Event Commands that target the "Player"
  return to normal and followers chase again.

---

Global Switch Plugin Commands

---

EventsMoveCoreCommandGlobal1.png

Global Switch: Get Self Switch A B C D
- Gets the current ON/OFF value from a Self Switch and stores it onto a
  Global Switch.

  Map ID:
  - The map the source map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the source event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Letter:
  - Letter of the target event's Self Switch to obtain data from.

  -

  Target Switch ID:
  - The ID of the target switch.

---

EventsMoveCoreCommandGlobal2.png

Global Switch: Get Self Switch ID
- Gets the current ON/OFF value from a Self Switch and stores it onto a
  Global Switch.

  Map ID:
  - The map the source map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the source event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Switch ID:
  - The ID of the source switch.

  -

  Target Switch ID:
  - The ID of the target switch.

---

Global Variable Plugin Commands

---

EventsMoveCoreCommandGlobal3.png

Global Variable: Get Self Variable ID
- Gets the current stored value from a Self Variable and stores it onto a
  Global Variable.

  Map ID:
  - The map the source map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the source event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Variable ID:
  - The ID of the source variable.

  -

  Target Variable ID:
  - The ID of the target variable.

---

Morph Event Plugin Commands

---

EventsMoveCore PluginCommand 11.png

Morph Event: Change
- Runs the page of a different event remotely.

  Step 1:

    Map ID:
    - Target event's map. Use 0 for current map.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event.
    - Use 0 for current event.
    - You may use JavaScript code.

  Step 2:

    Template Name:
    - Name of the target event template to morph into.
    - Ignored if this is called "Untitled".

    Map ID:
    - Target event's map. Use 0 for current map.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event.
    - Use 0 for current event.
    - You may use JavaScript code.

    Preserve Morph:
    - Is the morph effect preserved?
    - Or does it expire upon leaving the map?

---

EventsMoveCore PluginCommand 12.png

Morph Event: Remove
- Remove the morph status of an event.

  Map ID:
  - Target event's map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the event to remotely run.
  - Use 0 for current event.
  - You may use JavaScript code.

  Remove Preservation:
  - Also remove the preservation effect?

---

Player Icon Plugin Commands

---

EventsMoveCoreIcon.png

EventsMoveCore PluginCommand 13.png

Player Icon: Change
- Change the icon that appears on on the player.

  Icon Index:
  - Icon index used for the icon.
  - You may use JavaScript code.

  Buffer X:
  - How much to shift the X position by?
  - You may use JavaScript code.

  Buffer Y:
  - How much to shift the Y position by?
  - You may use JavaScript code.

  Blend Mode:
  - What kind of blend mode do you wish to apply to the icon sprite?

---

EventsMoveCore PluginCommand 14.png

Player Icon: Delete
- Delete the icon that appears on the player.

---

Self Data Plugin Commands

---

EventsMoveCore Update97 Command1.png

Self Data: Reset All
- Reset the Self Switch and Self Variable data of all events within the
  specified map.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

---

Self Switch Plugin Commands

---

EventsMoveCore PluginCommand 15.png

Self Switch: A B C D
- Change the Self Switch of a different event.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Letter:
  - Letter of the target event's Self Switch to change.

  Value:
  - What value do you want to set the Self Switch to?

---

EventsMoveCoreSelfSwitchesVariables.png

EventsMoveCore PluginCommand 16.png

Self Switch: Switch ID
- Change the Self Switch of a different event.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Switch ID:
  - The ID of the target switch.

  Value:
  - What value do you want to set the Self Switch to?

---

Self Variable Plugin Commands

---

EventsMoveCoreSelfSwitchesVariables.png

EventsMoveCore PluginCommand 17.png

Self Variable: Variable ID
- Change the Self Variable of a different event.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Variable ID:
  - The ID of the target variable.

  Value:
  - What value do you want to set the Self Switch to?

---

Spawn Event Plugin Commands

---

EventsMoveCore PluginCommand 18.png

Spawn Event: Spawn At X, Y
- Spawns desired event at X, Y location on the current map.

  Step 1:

    Template Name:
    - Name of the target event template to spawn as.
    - Ignored if this is called "Untitled".

    Map ID:
    - Target event's map to be used as reference.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event to be used as reference.
    - You may use JavaScript code.

  Step 2:

    X Coordinate:
    - Target Location to spawn at.
    - You may use JavaScript code.

    Y Coordinate:
    - Target Location to spawn at.
    - You may use JavaScript code.

    Check Event Collision:
    - Check collision with any other events and player?

    Check Passability:
    - Check passability of the target location.

    Preserve Spawn:
    - Is the spawned event preserved?
    - Or does it expire upon leaving the map?

  Step 3:

    Success Switch ID:
    - Target switch ID to record spawning success.
    - Ignore if ID is 0. OFF means failed. ON means success.

---

EventsMoveCore PluginCommand 19.png

Spawn Event: Spawn At Region
- Spawns desired event at a random region-marked location on the
  current map.

  Step 1:

    Template Name:
    - Name of the target event template to spawn as.
    - Ignored if this is called "Untitled".

    Map ID:
    - Target event's map to be used as reference.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event to be used as reference.
    - You may use JavaScript code.

  Step 2:

    Region ID(s):
    - Pick region(s) to spawn this event at.

    Check Event Collision:
    - Check collision with any other events and player?

    Check Passability:
    - Check passability of the target location.

    Preserve Spawn:
    - Is the spawned event preserved?
    - Or does it expire upon leaving the map?

  Step 3:

    Success Switch ID:
    - Target switch ID to record spawning success.
    - Ignore if ID is 0. OFF means failed. ON means success.

---

EventsMoveCore Update20 Command1.png

Spawn Event: Spawn At Terrain Tag
- Spawns desired event at a random terrain tag-marked location on the
  current map.

  Step 1:

    Template Name:
    - Name of the target event template to spawn as.
    - Ignored if this is called "Untitled".

    Map ID:
    - Target event's map to be used as reference.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event to be used as reference.
    - You may use JavaScript code.

  Step 2:

    Terrain Tag(s):
    - Pick terrain tag(s) to spawn this event at.
    - Insert numbers between 0 and 7.

    Check Event Collision:
    - Check collision with any other events and player?

    Check Passability:
    - Check passability of the target location.

    Preserve Spawn:
    - Is the spawned event preserved?
    - Or does it expire upon leaving the map?

  Step 3:

    Success Switch ID:
    - Target switch ID to record spawning success.
    - Ignore if ID is 0. OFF means failed. ON means success.

---

EventsMoveCore PluginCommand 20.png

Spawn Event: Despawn Event ID
- Despawns the selected Event ID on the current map.

  Event ID
  - The ID of the target event.
  - You may use JavaScript code.

---

EventsMoveCore PluginCommand 21.png

Spawn Event: Despawn At X, Y
- Despawns any spawned event(s) at X, Y location on the current map.

  X Coordinate:
  - Target Location to despawn at.
  - You may use JavaScript code.

  Y Coordinate:
  - Target Location to despawn at.
  - You may use JavaScript code.

---

EventsMoveCore PluginCommand 22.png

Spawn Event: Despawn Region(s)
- Despawns the selected Region(s).

  Region ID(s)
  - Pick region(s) and despawn everything inside it.

---

EventsMoveCore Update20 Command2.png

Spawn Event: Despawn Terrain Tag(s)
- Despawns the selected Terrain Tags(s) on the current map.

  Terrain Tag(s):
  - Pick terrain tag(s) and despawn everything inside it.
  - Insert numbers between 0 and 7.

---

EventsMoveCore PluginCommand 23.png

Spawn Event: Despawn Everything
- Despawns all spawned events on the current map.

---

Event Title Scene VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

System-Type Plugin Commands

EventTitleScene Example2.gif

---

EventTitleScene Command1.png

System: Start New Game
- Leaves the current scene and starts a new game.

  Slow Fade Out?:
  - Use a slow fade out transition to the next scene?

---

EventTitleScene Command2.png

System: Open Load Scene
- Leaves the current scene and opens the load game scene.

  Slow Fade Out?:
  - Use a slow fade out transition to the next scene?

---

EventTitleScene Command3.png

System: Open Options Scene
- Leaves the current scene and opens the options scene.

  Slow Fade Out?:
  - Use a slow fade out transition to the next scene?

---

Extra Enemy Drops VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Bonus Reward Plugin Commands

---

ExtraEnemyDrops Command1.png

Bonus Rewards: Clear
- Clears all bonus drops.

---

ExtraEnemyDrops Command2.png

Bonus Rewards: Set EXP
- Determines additional EXP the player will get in battle by this value.

  EXP:
  - Determines additional EXP the player will get in battle by this value.

---

ExtraEnemyDrops Command3.png

Bonus Rewards: Set Gold
- Determines additional Gold the player will get in battle by this value.

  Gold:
  - Determines additional Gold the player will get in battle by this value.

---

ExtraEnemyDrops Command4.png

Bonus Rewards: Add Item
- Adds the bonus drop the player earns from this battle to have the
  following item given at a specific quantity.

  Item ID:
  - Which item do you wish to give the player?

  Quantity:
  - How many copies of the bonus drop to give the player.

---

ExtraEnemyDrops Command5.png

Bonus Rewards: Add Weapon
- Adds the bonus drop the player earns from this battle to have the
  following weapon given at a specific quantity.

  Weapon ID:
  - Which weapon do you wish to give the player?

  Quantity:
  - How many copies of the bonus drop to give the player.

---

ExtraEnemyDrops Command6.png

Bonus Rewards: Add Armor
- Adds the bonus drop the player earns from this battle to have the
  following armor given at a specific quantity.

  Armor ID:
  - Which armor do you wish to give the player?

  Quantity:
  - How many copies of the bonus drop to give the player.

---

Forced Reward Plugin Commands

---

ExtraEnemyDrops Command7.png

Forced Rewards: Clear
- Clears all forced drops.

---

ExtraEnemyDrops Command8.png

Forced Rewards: Set EXP
- Change the amount of EXP the player will get in battle to this value.

  EXP:
  - Change the amount of EXP the player will get in battle to this value.

---

ExtraEnemyDrops Command9.png

Forced Rewards: Set Gold
- Change the amount of Gold the player will get in battle to this value.

  Gold:
  - Change the amount of Gold the player will get in battle to this value.

---

ExtraEnemyDrops Command10.png

Forced Rewards: Add Item
- Adds the forced drop the player earns from this battle to have the
  following item given at a specific quantity.

  Item ID:
  - Which item do you wish to give the player?

  Quantity:
  - How many copies of the forced drop to give the player.

---

ExtraEnemyDrops Command11.png

Forced Rewards: Add Weapon
- Adds the forced drop the player earns from this battle to have the
  following weapon given at a specific quantity.

  Weapon ID:
  - Which weapon do you wish to give the player?

  Quantity:
  - How many copies of the forced drop to give the player.

---

ExtraEnemyDrops Command12.png

Forced Rewards: Add Armor
- Adds the forced drop the player earns from this battle to have the
  following armor given at a specific quantity.

  Armor ID:
  - Which armor do you wish to give the player?

  Quantity:
  - How many copies of the forced drop to give the player.

---

Visual Drop Plugin Commands

---

ExtraEnemyDrops VisualDrops.gif

ExtraEnemyDrops Command13.png

Visual Drops: Visibility
- Sets the visibility of visual drops during battle.

  Visible:
  - Show visual drops during battle?
  - This will be reset at the start of next battle.

---

Furniture System VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Furniture Plugin Commands

FurnitureSys Preview.gif

---

Furniture: Add Player Placement
- Start furniture placement mode for a specific template type.
- Player determines the actual position.
- Cannot use this Plugin Command during Furniture Mode.

  Furniture Item:
  - Which furniture item is used to be placed?
  - Non-furniture items won't work.

  Generate Item?:
  - Generate an item for the player?
  - If the player does not have the furniture item in stock, this will not
    work.

---

Furniture: Spawn At X, Y
- Spawns desired furniture at X, Y location on the current map.
- Cannot use this Plugin Command during Furniture Mode.

  Furniture Item:
  - Which furniture item is used to be placed?
  - Non-furniture items won't work.

  Template Index:
  - Which template index do you wish to use for the spawned furniture item?
  - Index starts at 0.

  Location:

    X Coordinate:
    Y Coordinate:
    - Target X/Y coordinate to spawn at.
    - You may use JavaScript code.

  Success Switch ID:
  - Target switch ID to record spawning success.
  - Ignore if ID is 0. OFF means failed. ON means success.

---

Event At X/Y Plugin Commands

FurnitureSys Preview3.gif

---

Event At X/Y: Despawn Furniture
- Completely remove the furniture event at X/Y.
- Can use on either furniture or non-furniture.

  X Coordinate:
  Y Coordinate:
  - Target X/Y coordinate to search for Furniture Event.
  - You may use JavaScript code.

---

Event At X/Y: Move Furniture
- Move the furniture item event at X/Y.
- Use on a template event that can be spawned and moved.
- Cannot use this Plugin Command during Furniture Mode.

  X Coordinate:
  Y Coordinate:
  - Target X/Y coordinate to search for Furniture Event.
  - You may use JavaScript code.

---

Event At X/Y: Retrieve Furniture
- Retrieve the furniture at X/Y to Player's inventory.
- Use on a template event that can be spawned and moved.

  X Coordinate:
  Y Coordinate:
  - Target X/Y coordinate to search for Furniture Event.
  - You may use JavaScript code.

---

This Event Plugin Commands

FurnitureSys Preview.gif

---

This Event: Despawn Furniture
- Completely remove this current furniture event.
- Can use on either furniture or non-furniture.

---

This Event: Move Furniture
- Move this current furniture item.
- Use on a template event that can be spawned and moved.

---

This Event: Retrieve Furniture
- Retrieve this current furniture to Player's inventory.
- Use on a template event that can be spawned and moved.

---

Gab Window VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

Gab Plugin Commands

---

GabWindowScreen3.png

GabWindowCommand01.png

Gab: Text Only
- Show a Gab Window with the specified settings.

  Text:
  - The text to be shown in the Gab Window.

  Force Gab?:
  - Forced gabs will clear other gabs and display immediately.

  Optional Settings:
  - Change the settings you want to override with this gab.
    Blank settings will use default Plugin Parameter settings.

---

GabWindowScreen2.png

GabWindowCommand02.png

Gab: Gab: Text + Face (Any)
- Show a Gab Window with the specified settings.
- Any face graphic can be displayed next to text.

  Text:
  - The text to be shown in the Gab Window.

  Filename:
  - The filename of the face graphic to use.

  Index:
  - This is the index of the face graphic.
  - Index values start at 0.

  Force Gab?:
  - Forced gabs will clear other gabs and display immediately.

  Optional Settings:
  - Change the settings you want to override with this gab.
    Blank settings will use default Plugin Parameter settings.

---

GabWindowCommand03.png

Gab: Text + Face (Actor)
- Show a Gab Window with the specified settings.
- Pick an actor's face graphic to show with it.

  Text:
  - The text to be shown in the Gab Window.

  Actor ID:
  - This is the ID of the actor you want the face graphic of.

  Force Gab?:
  - Forced gabs will clear other gabs and display immediately.

  Optional Settings:
  - Change the settings you want to override with this gab.
    Blank settings will use default Plugin Parameter settings.

---

GabWindowCommand04.png

Gab: Text + Face (Party)
- Show a Gab Window with the specified settings.
- Pick a party member's face graphic to show with it.

  Text:
  - The text to be shown in the Gab Window.

  Party Member Index:
  - This is the index of the party member you want the face graphic of.
  - Index values start at 0.

  Force Gab?:
  - Forced gabs will clear other gabs and display immediately.

  Optional Settings:
  - Change the settings you want to override with this gab.
    Blank settings will use default Plugin Parameter settings.

---

GabWindowScreen5.gif

GabWindowCommand05.png

Gab: Text + Map Sprite (Any)
- Show a Gab Window with the specified settings.
- Any map sprite can be displayed next to text.

  Text:
  - The text to be shown in the Gab Window.

  Filename:
  - The filename of the sprite graphic to use.

  Index:
  - This is the index of the sprite graphic.
  - Index values start at 0.

  Force Gab?:
  - Forced gabs will clear other gabs and display immediately.

  Optional Settings:
  - Change the settings you want to override with this gab.
    Blank settings will use default Plugin Parameter settings.

---

GabWindowCommand06.png

Gab: Text + Map Sprite (Actor)
- Show a Gab Window with the specified settings.
- Pick an actor's sprite graphic to show with it.

  Text:
  - The text to be shown in the Gab Window.

  Actor ID:
  - This is the ID of the actor you want the map sprite of.

  Force Gab?:
  - Forced gabs will clear other gabs and display immediately.

  Optional Settings:
  - Change the settings you want to override with this gab.
    Blank settings will use default Plugin Parameter settings.

---

GabWindowCommand07.png

Gab: Text + Map Sprite (Party)
- Show a Gab Window with the specified settings.
- Pick a party member's sprite graphic to show with it.

  Text:
  - The text to be shown in the Gab Window.

  Party Member Index:
  - This is the index of the party member you want the map sprite of.
  - Index values start at 0.

  Force Gab?:
  - Forced gabs will clear other gabs and display immediately.

  Optional Settings:
  - Change the settings you want to override with this gab.
    Blank settings will use default Plugin Parameter settings.

---

GabWindowScreen1.png

GabWindowCommand08.png

Gab: Text + Sideview Actor (Any)
- Show a Gab Window with the specified settings.
- Any Sideview Actor can be displayed next to text.

  Text:
  - The text to be shown in the Gab Window.

  Filename:
  - The filename of the Sideview Actor graphic to use.

  Force Gab?:
  - Forced gabs will clear other gabs and display immediately.

  Optional Settings:
  - Change the settings you want to override with this gab.
    Blank settings will use default Plugin Parameter settings.

---

GabWindowCommand09.png

Gab: Text + Sideview Actor (Actor)
- Show a Gab Window with the specified settings.
- Pick an actor's sideview graphic to show with it.

  Text:
  - The text to be shown in the Gab Window.

  Actor ID:
  - This is the ID of the actor you want the sideview graphic of.

  Force Gab?:
  - Forced gabs will clear other gabs and display immediately.

  Optional Settings:
  - Change the settings you want to override with this gab.
    Blank settings will use default Plugin Parameter settings.

---

GabWindowCommand10.png

Gab: Text + Sideview Actor (Party)
- Show a Gab Window with the specified settings.
- Pick a party member's sideview graphic to show with it.

  Text:
  - The text to be shown in the Gab Window.

  Party Member Index:
  - This is the index of the party member you want the sideview graphic of.
  - Index values start at 0.

  Force Gab?:
  - Forced gabs will clear other gabs and display immediately.

  Optional Settings:
  - Change the settings you want to override with this gab.
    Blank settings will use default Plugin Parameter settings.

---

GabWindowScreen6.png

GabWindowCommand11.png

Gab: Text + Picture
- Show a Gab Window with the specified settings.
- Any picture graphic can be displayed next to text.

  Text:
  - The text to be shown in the Gab Window.

  Filename:
  - The filename of the face graphic to use.

  Stretch Picture:
  - Stretch the picture to fit the window?

  Force Gab?:
  - Forced gabs will clear other gabs and display immediately.

  Optional Settings:
  - Change the settings you want to override with this gab.
    Blank settings will use default Plugin Parameter settings.

---

Optional Settings

GabWindowScreen4.png

GabWindowCommandOptional.png

These settings appear in the above Gab Plugin Commands. Opening up the Optional Settings will yield the following:

---

DimColor

  Dim Color 1:
  Dim Color 2:
  - The dim colors to use for this Gab Window.
  - Format: rgba(red, green, blue, alpha)

---

Fade

  Fade Rate:
  - How fast this Gab Window fades away.

  Fade Direction:
  - The direction this Gab Window fades out in.

---

Font

  Font Name:
  - The font name to use for this Gab Window.

  Font Size:
  - The font size to use for this Gab Window.

---

Position

  Y Location:
  - The Y coordinate this Gab Window will appear in.
  - Ignore if you are using a locked sprite position.

  Actor ID:
  - The ID of the actor to display this Gab Window above.
  - For Map/Battle.

  Party Index:
  - Index of the party member to display Gab Window above.
  - For Map/Battle. Index values start at 0. Ignore under 0.

  Enemy Index:
  - Index of an enemy battler to display Gab Window above.
  - Battle only. Index values start at 0. Ignore under 0.

  Event ID:
  - The ID of the event to display this Gab Window above.
  - Map only.

---

On Display

  Bypass Anti-Repeat:
  - Allows this gab to bypass the Anti-Repeat settings.

  Sound Filename:
  - The filename of the SE to play when the Gab Window shows.

  JS: On Display:
  - Runs this code once this Gab Window shows up.

---

On Finish

  Gab Switch:
  - The specified switch will be turned ON when the Gab Window finishes.

  JS: On Finish:
  - Runs this code once this Gab Window finishes.

---

Waiting

  Wait Time:
  - The number of frames this Gab Window stays visible.

  Time Per Character:
  - Frames added per Text Character in this Gab Window.

---

System Plugin Commands

---

GabWindowCommand12.png

System: Clear Gabs
- Clears out the current Gab and any which are queued.

---

GabWindowCommand13.png

System: Wait For Gab Completion
- Causes the game to wait until all gabs are finished playing.

---

Items and Equips Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

--

ItemsEquipsCoreEquipTypes.png

ItemsEquipsCoreUpdate16 Command1.png

Actor: Change Equip Slots
- Forcefully change the actor(s) equip slots.
- These will persist through class changes.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Equip Slots:
  - Insert the equip slots you want the actor(s) to have.
  - These entries are case-sensitive.

--

ItemsEquipsCoreEquipTypes.png

ItemsEquipsCoreUpdate16 Command2.png

Actor: Reset Equip Slots
- Reset any forced equip slots for the actor(s).
- Equip slots will then be based on class.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

---

Purify Plugin Commands

---

ItemsEquipsCore Command1.png

Purify: Target Actor(s)
- Purifies target actor(s) of any cursed weapons or armors.
- Cannot be used in battle.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

---

ItemsEquipsCore Command2.png

Purify: Whole Party
- Purifies whole party of any cursed weapons or armors.
- Cannot be used in battle.

---

Shop Plugin Commands

---

ItemsEquipsCoreShopEquip.png

ItemsEquipsCorePluginCommand1.png

Shop: Advanced
- Make it easier to put together inventories for a shop.
- WARNING: Does not allow for event-specific prices.

  Step 1: Item ID's
  - Select which Item ID ranges to add.

  Step 2: Weapon ID's
  - Select which Weapon ID ranges to add.

  Step 3: Armor ID's
  - Select which Armor ID ranges to add.

  Step 4: Purchase Only?
  - Make the shop purchase-only?

  Optional:

    Blacklist
    - A list of categories to blacklist from the shop.
    - Not used if empty. Mark categories with <Category: x>

    Whitelist
    - A list of categories to whitelist for the shop.
    - Not used if empty. Mark categories with <Category: x>

This Plugin Command primarily functions as an alternative to the editor's
"Shop Processing" event command as that one requires you to add items one at
a time, making it extremely tedious to add large amounts of items. This
Plugin Command will mitigate that by allowing ID ranges to determine which
items to make available.

---

Item Crafting System VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

ItemCraftingSys Preview1.png

---

Scene

---

ItemCraftingSys Command1.png

Scene: Item Crafting (All)
- Go to the Item Crafting scene.
- All enabled recipes will be available.

---

ItemCraftingSys Command2.png

Scene: Item Crafting (Custom)
- Go to the Item Crafting scene.
- Select specific items to craft here.
- Some items can only appear through custom lists like this by using the
  <Custom Crafting Only> notetag.

  Items:
  - Select which Item ID(s) to become craftable.

  Weapons:
  - Select which Weapon ID(s) to become craftable.

  Armors:
  - Select which armor ID(s) to become craftable.

  Bypass Switches?:
  - Bypass any of the requirement switches?

  Bypass Masks?:
  - Bypass name masking for uncrafted items?

---

Requires:

VisuMZ.083.jpg

Scene: Common Event Return
- Return to the last shop if coming from a Crafting Common Event.
- Requires VisuMZ_2_ShopCommonEvents!

---

System

---

ItemCraftingSys Command3.png

System: Enable Crafting in Menu?
- Enables/disables Crafting menu inside the main menu.

  Enable/Disable?:
  - Enables/disables Crafting menu inside the main menu.

---

ItemCraftingSys Command4.png

System: Show Crafting in Menu?
- Shows/hides Crafting menu inside the main menu.

  Show/Hide?:
  - Shows/hides Crafting menu inside the main menu.

---

Main Menu Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

---

MainMenuCorePluginCommand.png

Actor: Change Menu Image (Group)
Actor: Change Menu Image (Range)
Actor: Change Menu Image (JS)
- Changes the actor's Menu Image.
- Each version has a different means of selecting Actor ID's.

  Actor ID:
  - Select which ID(s) to affect.

  Filename:
  - Selected actor(s) will have their menu images changed to this.

---

Menu Command Plugin Commands

---

Menu Command: Clear Forced Settings
- Clear any forced settings for the menu command symbols.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Menu Command: Force Disable
- Forcefully disable specific menu commands via their symbols.
- Matching forced enabled symbols will be overwritten.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Menu Command: Force Enable
- Forcefully enable specific menu commands via their symbols.
- Matching forced disabled symbols will be overwritten.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Menu Command: Force Hide
- Forcefully hide specific menu commands via their symbols.
- Matching forced shown symbols will be overwritten.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Menu Command: Force Show
- Forcefully show specific menu commands via their symbols.
- Matching forced hidden symbols will be overwritten.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Menu Cursor VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Menu Cursor Plugin Commands

---

MenuCursor.gif

MenuCursor Command1.png

Menu Cursor: Change Settings
- Changes the settings for the menu cursor's appearance.

  Appearance Type:
  - Select the appearance type for the menu cursor.

    Icon Index:
    - If "icon" is selected as the appearance type, use this icon as
      the cursor.

    Picture Filename:
    - If "picture" is selected as the appearance type, use this image from
      img/pictures/ as the cursor.

    System Filename:
    - If "system" is selected as the appearance type, use this image from
      img/system/ as the cursor.

    Frame Delay:
    - The frame delay for any animated "picture" or "system" cursors before
      moving onto the next frame.

  Anchor:

    Anchor X:
    Anchor Y:
    - Select the position to determine where the cursor's Anchor
      is located.

  Position:

    Position X:
    Position Y:
    - Select the placement to determine where the cursor's Position
      is located.

  Offset:

    Offset X:
    Offset Y:
    - Select how much to offset the cursor's X/Y position by.

  Wave:

    Wave Type:
    - Determine how the cursor moves while active.

    Speed:
    - Select how fast the cursor oscillates.
    - Lower is slower. Higher is faster.

    Distance:
    - Select how far the cursor sprite will oscillate from its origin.

---

Message Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Message Plugin Commands

---

MessageCoreLargerMessageBox.png

MessageCore Update30 Command1.png

Message: Properties
  Change the various properties of the Message Window.

  Rows:
  - Change the number of Message Window rows.
  - Leave at 0 to keep it unchanged.

  Width:
  - Change the Message Window width in pixels.
  - Leave at 0 to keep it unchanged.

  Word Wrap:
  - Enable or disable Word Wrap for the Message Window?

---

MessageCore Update30 Command2.png

Message: X/Y Offsets
- Change the X and Y Offsets of the Message Window.
- The offset value(s) will be saved and stored.

  Offset X:
  - Offset Message Window horizontally.
  - Negative: Left; Positive: Right
  - Message Window coordinates are still restricted via clamping.

  Offset Y:
  - Offset Message Window vertically.
  - Negative: Up; Positive: Down
  - Message Window coordinates are still restricted via clamping.

---

Choice Plugin Commands

---

MessageCoreExpandedChoices.png

---

MessageCore Update133 Command1.png

Choices: Distance
- Change the distance from choice window to the message window.

  Distance:
  - Change distance between the choice and message windows.
  - Default distance is 0.
  - Use negative to center align with remaining space.

---

MessageCorePluginCommand2.png

Choice: Properties
  Change the properties found in the Show Choices event command.

  Choice Line Height:
  - Change the line height for the show choices.
  - Leave at 0 to keep this unchanged.

  Minimum Choice Width:
  - What is the minimum width size for each choice?
  - 96 is the default width.

  Max Rows:
  - Maximum number of choice rows to be displayed.
  - Leave at 0 to keep this unchanged.

  Max Columns:
  - Maximum number of choice columns to be displayed.
  - Leave at 0 to keep this unchanged.

  Text Alignment:
  - Text alignment for Show Choice window.

---

Picture Plugin Commands

---

MessageCore PictureText.png

MessageCore Update33 Command1.png

Picture: Change Text
- Change text for target picture(s) to show.
- You may use text codes.
- Text will adapt to picture's properties.
- Settings will be erased if picture is erased.

  Picture ID(s):
  - The ID(s) of the picture(s) to set text to.

  Padding:
  - How much padding from the sides should there be?

  Text:

    Upper Left:
    Upper Center:
    Upper Right:
    Middle Left:
    Middle Center:
    Middle Right:
    Lower Left:
    Lower Center:
    Lower Right:
    - The text that's aligned to this picture's side.
    - You may use text codes.

---

MessageCore Update33 Command2.png

Picture: Erase Text
- Erase all text for target picture(s).

  Picture ID(s):
  - The ID(s) of the picture(s) to erase text for.

---

MessageCore Update95 Command1.png

Picture: Refresh Text
- Refreshes the text used for all on-screen pictures.
- To be used if any dynamic text codes are updated like \n[x].

---

Select Plugin Commands

---

MessageCore Update123 Preview2.png

MessageCore Update123 Command1.png

Select: Weapon
- Opens the Event Select Item Window to let the player pick a weapon to
  choose from.
- Can be opened while the Message Window is open.

  Variable ID:
  - This variable will be used to record the ID of the selected weapon.
  - It will result in 0 otherwise.

  Weapon Type ID:
  - Reduce all the weapons to a specific weapon type.
  - Leave at 0 to not use filters.

---

MessageCore Update123 Preview3.png

MessageCore Update123 Command2.png

Select: Armor
- Opens the Event Select Item Window to let the player pick an armor to
  choose from.
- Can be opened while the Message Window is open.

  Variable ID:
  - This variable will be used to record the ID of the selected armor.
  - It will result in 0 otherwise.

  Armor Type ID:
  - Reduce all the armors to a specific armor type.
  - Leave at 0 to not use filters.

  Equip Type ID:
  - Reduce all the armors to a specific equip type.
  - Leave at 0 to not use filters.

---

MessageCore Update123 Preview4.png

MessageCore Update123 Command3.png

Select: Skill
- Opens the Event Select Item Window to let the player pick a skill to
  choose from.
- Requires VisuMZ_1_SkillsStatesCore!
- Can be opened while the Message Window is open.
- Skills will not be listed if they are hidden by the actor.
- Skills will not be listed if the actor lacks access to their Skill Type.

  Variable ID:
  - This variable will be used to record the ID of the selected skill.
  - It will result in 0 otherwise.

  Actor ID:
  - Select an actor to get the skill list from.
  - Use 0 to select from the party leader.

  Skill Type ID:
  - Reduce all the skills to a specific skill type.
  - Leave at 0 to not use filters.

---

Message Letter Sounds VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Message Sound Plugin Commands

MsgLetterSounds Preview1.png

Source

---

MsgLetterSounds Command1.png

Message Sound: Change
- Change the settings to the Message Sound settings below.

  Filename:
  - Filename of the sound effect played.

  Interval:
  - Interval the sound effect from being played between how many characters?

  Volume:
  - Volume of the sound effect played.

    Variance:
    - When playing the sound effect, vary the volume by how much?

  Pitch:
  - Pitch of the sound effect played.

    Variance:
    - When playing the sound effect, vary the pitch by how much?

  Pan:
  - Pan of the sound effect played.

    Variance:
    - When playing the sound effect, vary the pan by how much?

---

MsgLetterSounds Command2.png

Message Sound: Reset
- Resets the settings to the Plugin Parameters settings.

---

System Plugin Commands

---

MsgLetterSounds Command3.png

System: Enable/Disable Letter Sounds
- Enables/disables Message Letter Sounds for the game.

  Enable/Disable?:
  - Enables/disables Message Letter Sounds for the game.

---

Message Log VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Bypass Plugin Commands

MessageLog Preview.gif

MessageLog Command1.png

---

Bypass: Message Logging?
- Bypass message logging until turned off.

  Bypass?:
  - Bypasses Message Logging until turned off.

---

System Plugin Commands

---

MessageLog Command2.png

System: Enable Message Log in Menu?
- Enables/disables Message Log menu inside the main menu.

  Enable/Disable?:
  - Enables/disables Message Log menu inside the main menu.

---

MessageLog Command3.png

System: Show Message Log in Menu?
- Shows/hides Message Log menu inside the main menu.

  Show/Hide?:
  - Shows/hides Message Log menu inside the main menu.

---

New Game Plus VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Save Plugin Commands

---

NewGamePlus Preview1.png

NewGamePlus Command1.png

Save: New Game+
- Opens up the Save menu for the player to save a New Game+ file.
- Only works from map scene.

---

Transition Plugin Commands

---

NewGamePlus Preview1.png

NewGamePlus Command2.png

Transition: New Game+
- Transitions the current game directly into a New Game+.
- Only works from map scene.

---

Party System VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Party Plugin Commands

---

PartySystemScene1.png

PartySystemCommand1.png

Party: Call Party Scene
- Calls the party changing scene.

---

PartySystemMenu1.png

PartySystemCommand2.png

Party: Change Max Battle Members
- Changes the number of max battle members possible.
- Cannot be use mid-battle.

  Max Members:
  - Changes the number of max battle members possible.
  - Use 0 for the game's default number.

---

PartySystemScene3.png

PartySystemCommand3.png

Party: Lock/Unlock Member(s)
- Allows you to lock/unlock a party member.
- Locked actors cannot change their party position.

  Actor ID(s):
  - Select which actor(s) to lock/unlock.
  - Locked actors cannot change their party position.

  Lock?:
  - Lock the selected actor(s)?

---

PartySystem Update24 Command1.png

Party: Move Actor(s) to Active
- Map Only.
- Moves an actor to the active party if there is room.
- The actor needs to have joined the party.

  Actor ID(s):
  - Select which actor(s) to move to the active party if there is room.

---

PartySystem Update24 Command2.png

Party: Move Actor(s) to Reserve
- Map Only.
- Moves an actor to the reserve party.
- Must be 1 actor left.
- The actor needs to have joined the party.

  Actor ID(s):
  - Select which actor(s) to move to the reserve party.

---

PartySystem Update25 Command1.png

Party: Move Party Index to Reserve
- Map only.
- Moves an actor in a specific party index to reserve.
- Must be 1 actor left.

  Index:
  - Type in which index to move.
  - Index values start at 0.
  - You may use JavaScript code.

---

PartySystem Update25 Command2.png

Party: Move Random Reserve to Active
- Map only.
- Moves a random actor from the reserve party to active.
- Must be enough space in active party.

---

PartySystemScene3.png

PartySystemCommand4.png

Party: Require Member(s)
- Allows you to require/free a party member.
- Required actors must be in the party to exit the scene.

  Actor ID(s):
  - Select which actor(s) to require/free.
  - Required actors must be in the party to exit the scene.

  Require?:
  - Make the selected actor(s) required?

---

Picture Choices VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Clear Plugin Commands

---

PictureChoices Command1.png

Clear: All Selection Settings
- Clears all selection settings for all pictures 1 through 100.

---

PictureChoices Command2.png

Clear: Picture ID(s) Selection Settings
- Clears all selection settings for the ID'd pictures.

  Picture ID(s):
  - Select which Picture ID(s) to clear.

---

PictureChoices Command3.png

Clear: Picture Range Selection Settings
- Clears all selection settings for the picture ID's in range.

  Starting ID:
  - The starting ID of the picture binds to clear.

  Ending ID:
  - The ending ID of the picture binds to clear.

---

Picture Settings Plugin Commands

PictureChoices Example.gif

---

PictureChoices Command4.png

Picture Settings: Change ID(s)
- Changes select and deselect settings for the picture ID(s).

  Step 1:

    Picture ID(s):
    - Select which Picture ID(s) to change settings for.

  Step 2:

    On Select Settings:
    - Picture settings when selecting that choice.

    On Deselect Settings:
    - Picture settings when deselecting that choice.

---

PictureChoices Command5.png

Picture Settings: Change ID(s)
- Changes select and deselect settings for the picture ID(s).

  Step 1:

    Starting ID:
    - The starting ID of the picture binds to clear.

    Ending ID:
    - The ending ID of the picture binds to clear.

  Step 2:

    On Select Settings:
    - Picture settings when selecting that choice.

    On Deselect Settings:
    - Picture settings when deselecting that choice.

---

PictureChoices Command Sub.png

Picture Settings
- These are the settings used for "On Select" and "On Deselect" settings.

  Easing:

    Duration:
    - Insert a number to determine duration of the changed settings when
      applied.

    Easing Type:
    - Select which easing type you wish to apply.
    - Many of these choices require VisuMZ_0_CoreEngine.

  Position:

    Target X:
    Target Y:
    - Insert a number to determine new X/Y position.
    - Use 'Unchanged' to not change the X/Y position.

    Target Width %:
    Target Height %:
    - Insert a number to determine new width/height.
    - 'Unchanged' for no changes.
    - For 100%, use 100.

  Blend:

    Target Opacity:
    - Insert a number to determine new opacity level.
    - 'Unchanged' for no changes.
    - Use a number between 0 and 255.

    Blend Mode:
    - What kind of blend mode do you wish to apply to the picture?

  Tone:

    Target Tone Red:
    Target Tone Green:
    Target Tone Blue:
    - Insert a number to determine new red/green/blue tone tint.
    - 'Unchanged' for no changes.
    - Use a number between -255 and 255.

    Target Tone Gray:
    - Insert a number to determine new red/green/blue tone tint.
    - 'Unchanged' for no changes.
    - Use a number between 0 and 255.

---

Picture Common Events VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

System Plugin Commands

---

PictureCommonEventsHover.gif

PicCommonEventsCommand1.png

System: Change Picture Common Event
- Change the Common Event bound to specific picture(s).

  Picture ID(s):
  - Select which Picture ID(s) to change.

  Common Event ID:
  - Change the Common Event bound to specific picture(s).

  Custom

    Opaque Only?
    - Ignore clicks on transparent pixels and accept only opaque pixels for
      this specific picture.

      Error Margin:
      - Error margin when clicking for opaque pixels.
      - This value determines the radius.

    Change Tone on Hover?
    - Change the tone of the picture on hover?

      Hover Tone:
      - Tone settings upon hovering.
      - Format: [Red, Green, Blue, Gray]

    Blend Mode on Hover:
    - The blend mode used when this picture is hovered over.

---

PicCommonEventsCommand2.png

System: Clear All Picture Common Events
- Clears all Common Event bound to specific picture(s).

---

PicCommonEventsCommand3.png

System: Clear Picture Common Event
- Clears any Common Event bound to specific picture(s).

  Picture ID(s):
  - Select which Picture ID(s) to clear.

---

PicCommonEventsCommand4.png

System: Erase & Clear All Pictures
- Erases all pictures on the screen and clears their Common Events.

---

PicCommonEventsCommand5.png

System: Erase & Clear Picture
- Erases and clears any Common Events attached to specific picture(s).

  Picture ID(s):
  - Select which Picture ID(s) to erase and clear.

---

Proximity Compass VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Compass Plugin Commands

ProximityCompass.gif

---

ProximityCompass Command1.png

Compass: Show/Hide Proximity Compass
- Show or hide the Proximity Compass.
- Does not bypass user settings.

  Setting:
  - Show or hide the Proximity Compass.
  - Does not bypass user settings.

---

ProximityCompass Command2.png

Compass: Change Player Icon
- Change the player icon to a different icon.

  Icon Index:
  - This is the icon you wish to change the player icon to.

---

Minimap Plugin Commands

---

ProximityCompass Minimap03.gif

ProximityCompass Update96 Command1.png

Minimap: Clear Explored Minimap
- Clears target map's exploration progress for the large minimap.
- Does not work on maps with <Already Explored> notetag.

  Map ID:
  - ID of the map you wish to clear exploration progress for.
  - Use '0' for current map.
  - You may use JavaScript.

---

ProximityCompass Minimap04.png

ProximityCompass Update96 Command2.png

Minimap: Fully Reveal Minimap
- Fully reveals the minimap for target map.

  Map ID:
  - ID of the map you wish to reveal map for.
  - Use '0' for current map.
  - You may use JavaScript.

---

ProximityCompass Minimap04.png

ProximityCompass Update96 Command3.png

Minimap: Toggle Large Minimap
- Show, hide, or toggle the large minimap.
- Requires Minimaps to be enabled.

  Show/Hide?:
  - Show, hide, or toggle the large minimap.

---

Quest Journal System VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Quest Plugin Commands

---

QuestJournalScreen3.png

QuestJournalSystemCommand1.png

Quest: Add/Complete/Fail/Remove
- Adds quest(s) to be known/completed/failed.
- Or removes them.

  Quest Keys:
  - Insert the quest key(s) here.
  - Each quest key must be unique.

  Status:
  - Change the status to this.
    - Add to Known
    - Add to Completed
    - Add to Failed
    - Remove from All

---

QuestJournalScreen1.png

QuestJournalSystemCommand2.png

Quest: Description Change
- Changes the description of the quest(s) to a ID.

  Quest Keys:
  - Insert the quest key(s) here.
  - Each quest key must be unique.

  Description ID:
  - Change the description of the quest(s) to a different ID.
  - You may use JavaScript code.

---

QuestJournalSystemCommand3.png

Quest: Objectives Change
- Changes the objective(s) status of the quest(s).

  Quest Keys:
  - Insert the quest key(s) here.
  - Each quest key must be unique.

  Objective ID(s):
  - Select the objective ID(s) to change.
  - You may use JavaScript code.

  Status:
  - Change the status of the objective(s) to this.
    - Show Objective(s)
    - Complete Objective(s)
    - Fail Objective(s)
    - Remove Objective(s)

---

QuestJournalSystemCommand4.png

Quest: Quote Quote
- Changes the quote of the quest(s) to a ID.

  Quest Keys:
  - Insert the quest key(s) here.
  - Each quest key must be unique.

  Subtext ID:
  - Change the quote of the quest(s) to a different ID.
  - You may use JavaScript code.

---

QuestJournalScreen3.png

QuestJournalSystemCommand5.png

Quest: Rewards Change
- Changes the reward(s) status of the quest(s).

  Quest Keys:
  - Insert the quest key(s) here.
  - Each quest key must be unique.

  Reward ID(s):
  - Select the reward ID(s) to change.
  - You may use JavaScript code.

  Status:
  - Change the status of the reward(s) to this.
    - Show Reward(s)
    - Claim Reward(s)
    - Deny Reward(s)
    - Remove Reward(s)

---

QuestJournalSystemCommand6.png

Quest: Subtext Change
- Changes the subtext of the quest(s) to a ID.

  Quest Keys:
  - Insert the quest key(s) here.
  - Each quest key must be unique.

  Subtext ID:
  - Change the subtext of the quest(s) to a different ID.
  - You may use JavaScript code.

---

Label Plugin Commands

QuestJournalSystem QuestMarker.gif

---

QuestJournalSystem Update127 Command1.png

Label: Add Quest Label
- Add Quest Labels to target items, weapons, and armors.

  Item ID(s):
  Weapon ID(s):
  Armor ID(s):
  - Select which Item, Weapon, or Armor ID(s) to add Quest Labels to.

---

QuestJournalSystem Update127 Command2.png

Label: Clear Quest Label
- Clear Quest Labels from target items, weapons, and armors.

  Item ID(s):
  Weapon ID(s):
  Armor ID(s):
  - Select which Item, Weapon, or Armor ID(s) to clear Quest Labels from.

---

Tracker Plugin Commands

---

QuestJournalScreen2.png

QuestJournalSystemCommand7.png

Tracker: Change Quest
- Changes the tracked quest.

  Quest Key:
  - Insert the quest key here.

---

QuestJournalSystemCommand8.png

Tracker: Refresh Window
- Refreshes the quest tracker window.

---

QuestJournalSystemCommand9.png

Tracker: Show/Hide Window
- Can forcefully hide window.
- Showing will depend on the player's Options setting.

  Show/Hide?:
  - Shows/hides the tracker window on the map.

---

System Plugin Commands

---

QuestJournalScreen1.png

QuestJournalSystemCommand10.png

System: Call Scene_Quest
- Opens Scene_Quest for the player.
- Does not work in battle.

---

QuestJournalSystemCommand11.png

System: Enable Quests in Menu?
- Enables/disables quest menu inside the main menu.

  Enable/Disable?:
  - Enables/disables quest menu inside the main menu.

---

QuestJournalSystemCommand12.png

System: Show Quests in Menu?
- Shows/hides quest menu inside the main menu.

  Show/Hide?:
  - Shows/hides quest menu inside the main menu.

---

Shop Common Events VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Return Plugin Commands

ShopCommonEvents Preview.gif

---

ShopCommonEvents Command1.png

Return: To Last Shop
- Return to the last shop if coming from a Shop Common Event.

---

Save Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Autosave Plugin Commands

---

SaveCoreAutoSave.png

SaveCorePluginCommands01.png

Autosave: Enable/Disable
- Enable or Disable Autosave
- Requires Database => System 1 => [x] Enable Autosave
- This does NOT mean it will change autosaving for other loaded game saves
  or new game sessions.
- This ONLY applies to the local session for the dev to control whether or
  not autosaving will occur at its usual conditions and scenarios.

  Enable or Disable?:
  - Enable or disable autosave?

---

SaveCorePluginCommands02.png

Autosave: (Stage 1) Request
- Autosaves the game at current point if enabled.
- Requires Database => System 1 => [x] Enable Autosave
- Autosave does not go through if it is neither enabled in the database or
  in-game through the "Autosave: Enable/Disable" plugin command.
- This Plugin Command will not autosave if the player turned off "Autosave"
  in the Options Menu.

---

SaveCorePluginCommands03.png

Autosave: (Stage 2) Execute
- Executes autosaves the game at the current point.
- Requires Database => System 1 => [x] Enable Autosave
- This will require autosave to be enabled through the database, but it will
  ignore the "Autosave: Enable/Disable" plugin command state.
- This Plugin Command will not autosave if the player turned off "Autosave"
  in the Options Menu.

---

SaveCorePluginCommands04.png

Autosave: (Stage 3) Force
- Forces autosaves the game at the current point.
- Requires Database => System 1 => [x] Enable Autosave
- This will require autosave to be enabled through the database, but it will
  ignore the "Autosave: Enable/Disable" plugin command state.

---

Save Plugin Commands

---

SaveCorePluginCommands05.png

Save: Current Slot
- Process the game's current save at the current point.
- Must be outside of battle and on the map.

---

SaveCorePicturesDesc.png

SaveCorePluginCommands06.png

Save: Set Description
- Set the description text that will appear in the save files.

  Text:
  - Insert desired save description text here.
  - Text codes supported.
  - \V[x], \N[x], \P[x] are save local.
  - Other text codes will draw data from the currently active game.

---

SaveCorePluginCommands07.png

Save: Set Picture
- Set the picture that would appear in the save file.

  Filename:
  - Input the filename here of the desired picture.

---

Skill Cooldowns VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

---

SkillCooldownsCD.png

SkillCooldownsCommand1.png

Actor: Skill Cooldown
- Change cooldowns for a specific skill(s).

  Step 1: Actor ID(s):
  - Select which Actor Target ID(s) to affect.

  Step 2: Skill ID(s):
  - Select which Skill ID(s) to affect.

  Step 3: Operation:
  - Set the operation used. =, +, -, *, /, %

  Step 4: Value
  - Select the modifying value.
  - You may use JavaScript code.

---

SkillCooldownsCommand2.png

Actor: SType Cooldown
- Change cooldowns for all skills of a skill type(s).

  Step 1: Actor ID(s):
  - Select which Actor Target ID(s) to affect.

  Step 2: Skill Type ID(s):
  - Select which Skill Type ID(s) to affect.

  Step 3: Operation:
  - Set the operation used. =, +, -, *, /, %

  Step 4: Value
  - Select the modifying value.
  - You may use JavaScript code.

---

SkillCooldownsCommand3.png

Actor: Global Cooldown
- Change cooldowns for all skills for target(s).

  Step 1: Actor ID(s):
  - Select which Actor Target ID(s) to affect.

  Step 2: Operation:
  - Set the operation used. =, +, -, *, /, %

  Step 3: Value
  - Select the modifying value.
  - You may use JavaScript code.

---

Enemy Plugin Commands

---

SkillCooldownsCommand4.png

Enemy: Skill Cooldown
- Change cooldowns for a specific skill(s).

  Step 1: Enemy Index(es):
  - Select which Enemy Index(es) to affect.

  Step 2: Skill ID(s):
  - Select which Skill ID(s) to affect.

  Step 3: Operation:
  - Set the operation used. =, +, -, *, /, %

  Step 4: Value
  - Select the modifying value.
  - You may use JavaScript code.

---

SkillCooldownsCommand5.png

Enemy: SType Cooldown
- Change cooldowns for all skills of a skill type(s).

  Step 1: Enemy Index(es):
  - Select which Enemy Index(es) to affect.

  Step 2: Skill Type ID(s):
  - Select which Skill Type ID(s) to affect.

  Step 3: Operation:
  - Set the operation used. =, +, -, *, /, %

  Step 4: Value
  - Select the modifying value.
  - You may use JavaScript code.

---

SkillCooldownsCommand6.png

Enemy: Global Cooldown
- Change cooldowns for all skills for target(s).

  Step 1: Enemy Index(es):
  - Select which Enemy Index(es) to affect.

  Step 2: Operation:
  - Set the operation used. =, +, -, *, /, %

  Step 3: Value
  - Select the modifying value.
  - You may use JavaScript code.

---

Skill Learn System VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Ability Points Plugin Commands

SkillLearnSystem Resources.png

---

SkillLearnSystem Command1.png

Ability Points: Gain
- The target actor(s) gains Ability Points.
- Gained amounts are affected by Ability Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to gain Ability Points for.
  - Use "0" for the current class.

  Ability Points:
  - Determine how many Ability Points will be gained.
  - You may use code.

---

SkillLearnSystem Command2.png

Ability Points: Add
- The target actor(s) receives Ability Points.
- Received amounts are NOT affected by Ability Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to receive Ability Points for.
  - Use "0" for the current class.

  Ability Points:
  - Determine how many Ability Points will be added.
  - You may use code.

---

SkillLearnSystem Command3.png

Ability Points: Lose
- The target actor(s) loses Ability Points.
- Lost amounts are NOT affected by Ability Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to lose Ability Points for.
  - Use "0" for the current class.

  Ability Points:
  - Determine how many Ability Points will be lost.
  - You may use code.

---

SkillLearnSystem Command4.png

Ability Points: Set
- Changes the exact Ability Points for the target actor(s).
- Changed amounts are NOT affected by Ability Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to change Ability Points for.
  - Use "0" for the current class.

  Ability Points:
  - Determine how many Ability Points will be set exactly to.
  - You may use code.

---

Skill Points Plugin Commands

SkillLearnSystem Resources.png

---

SkillLearnSystem Command5.png

Skill Points: Gain
- The target actor(s) gains Skill Points.
- Gained amounts are affected by Skill Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to gain Skill Points for.
  - Use "0" for the current class.

  Skill Points:
  - Determine how many Skill Points will be gained.
  - You may use code.

---

SkillLearnSystem Command6.png

Skill Points: Add
- The target actor(s) receives Skill Points.
- Received amounts are NOT affected by Skill Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to receive Skill Points for.
  - Use "0" for the current class.

  Skill Points:
  - Determine how many Skill Points will be added.
  - You may use code.

---

SkillLearnSystem Command7.png

Skill Points: Lose
- The target actor(s) loses Skill Points.
- Lost amounts are NOT affected by Skill Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to lose Skill Points for.
  - Use "0" for the current class.

  Skill Points:
  - Determine how many Skill Points will be lost.
  - You may use code.

---

SkillLearnSystem Command8.png

Skill Points: Set
- Changes the exact Skill Points for the target actor(s).
- Changed amounts are NOT affected by Skill Point bonus rates.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Class ID(s):
  - Select which Class ID(s) to change Skill Points for.
  - Use "0" for the current class.

  Skill Points:
  - Determine how many Skill Points will be set exactly to.
  - You may use code.

---

System Plugin Commands

---

SkillLearnSystem Command9.png

System: Show Skill Learn in Skill Menu?
- Shows/hides Skill Learn inside the skill menu.

  Show/Hide?:
  - Shows/hides Skill Learn inside the skill menu.

---

Victory Aftermath VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

---

VictoryAftermathLevelUpNew.png

VictoryAftermathPluginCommand1.png

Actor: Add Level Up Quotes
- Add new entries target actor's level up quotes.

  Actor ID:
  - Select ID of target actor to add quotes for.

  New Quotes:
  - Add new entries to actor's level up quotes.
  - Text codes allowed. %1 - Actor's Name

---

VictoryAftermathSkillLearnNew.png

VictoryAftermathPluginCommand2.png

Actor: Add New Skill Quotes
- Add new entries target actor's new skill quotes.

  Actor ID:
  - Select ID of target actor to add quotes for.

  New Quotes:
  - Add new entries to actor's new skill quotes.
  - Text codes allowed. %1 - Actor's Name

---

VictoryAftermathPluginCommand3.png

Actor: Clear Level Up Quotes
- Clear target actor's level up quotes.

  Actor ID:
  - Select ID of target actor to clear quotes for.

---

VictoryAftermathPluginCommand4.png

Actor: Clear New Skill Quotes
- Clear target actor's new skill quotes.

  Actor ID:
  - Select ID of target actor to clear quotes for.

---

System Plugin Commands

---

VictoryAftermathScreenshotNew.png

VictoryAftermathPluginCommand5.png

System: Bypass Victory Motion
- Bypass actors performing their victory motion?

  Bypass?:
  - Bypass actors performing their victory motion?

---

VictoryAftermathPluginCommand6.png

System: Bypass Victory Music
- Bypass playing the victory music?

  Bypass?:
  - Bypass playing the victory music?

---

VictoryAftermathPluginCommand7.png

System: Bypass Victory Phase
- Bypass the entire victory phase and all aspects about it?

  Bypass?:
  - Bypass the entire victory phase and all aspects about it?

---

Visual Battle Environment VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Back Environment-Type Plugin Commands

VisualBattleEnv Ani2.gif

---

VisualBattleEnv Command1.png

Back Environment: Add/Change
- Adds/changes the target back environment.

  Settings:

    ID:
    - Select the target environment ID to add/change.
    - Lower ID's appear below. Higher ID's appear above.

    Folder and Filename:
    - What is the folder and filename?

  Extra Settings:
  - Extra settings that can be altered for the environment object.
  - For details, refer to section below.

    Duration:
    - How many frames would it take to alter settings?

---

VisualBattleEnv Command2.png

Back Environment: Fade Opacity
- Fades the target back environment(s) opacity to a different value.

  ID(s):
  - Target which back environment(s)?
  - Cannot target the default battlebacks.

  Target Opacity:
  - What opacity level to this value (0-255).
  - You may use JavaScript code to determine the value.

  Duration:
  - How many frames should this change take?
  - You may use JavaScript code to determine the value.

---

VisualBattleEnv Command3.png

Back Environment: Remove
- Removes target back environment(s).

  ID(s):
  - Remove which back environment(s)?
  - Cannot remove the default battlebacks.

---

Front Environment-Type Plugin Commands

VisualBattleEnv Ani1.gif

---

VisualBattleEnv Command4.png

Front Environment: Add/Change
- Adds/changes the target front environment.

  Settings:

    ID:
    - Select the target environment ID to add/change.
    - Lower ID's appear below. Higher ID's appear above.

    Folder and Filename:
    - What is the folder and filename?

  Extra Settings:
  - Extra settings that can be altered for the environment object.
  - For details, refer to section below.

    Duration:
    - How many frames would it take to alter settings?

---

VisualBattleEnv Command5.png

Front Environment: Fade Opacity
- Fades the target front environment(s) opacity to a different value.

  ID(s):
  - Target which front environment(s)?
  - Cannot target the default battlebacks.

  Target Opacity:
  - What opacity level to this value (0-255).
  - You may use JavaScript code to determine the value.

  Duration:
  - How many frames should this change take?
  - You may use JavaScript code to determine the value.

---

VisualBattleEnv Command6.png

Front Environment: Remove
- Removes target front environment(s).

  ID(s):
  - Remove which front environment(s)?
  - Cannot remove the default battlebacks.

---

Extra-Settings

---

VisualBattleEnv Ani1.gif

VisualBattleEnv Ani2.gif

VisualBattleEnv CommandExtra.png

Extra Settings
- These settings are used for both the "Back Environment: Add/Change" and
  "Front Environment: Add/Change" Plugin Commands.

  Appearance:

    Scale Style:
    - The scaling style used for this environment image.
      - Battle Core Setting
      - MZ (MZ's default style)
      - 1:1 (No Scaling)
      - Scale To Fit (Scale to screen size)
      - Scale Down (Scale Downward if Larger than Screen)
      - Scale Up (Scale Upward if Smaller than Screen)

    Opacity:
    - What is the opacity level for this image?
    - You may use JavaScript code.

    Blend Mode:
    - What kind of blend mode do you wish to apply to the image?
    - You may use JavaScript code.
      - Normal
      - Additive
      - Multiply
      - Screen

    Hue:
    - Do you wish to adjust this image's hue?
    - You may use JavaScript code.

    Hue Shift:
    - How much do you want the hue to shift each frame?
    - You may use JavaScript code.

    Color Tone:
    - What tone do you want for the graphic?
    - Format: [Red, Green, Blue, Gray]

  Scrolling:

    Horizontal Scroll:
    - What is the horizontal scroll speed?
    - Use a negative value to invert the direction.

    Vertical Scroll:
    - What is the vertical scroll speed?
    - Use a negative value to invert the direction.

---

Visual Fogs VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Fog Plugin Commands

---

VisualFogs Preview1.gif

VisualFogs Command1.png

Fog: Add/Change Settings
- Add/Change settings for target fog.
- Does not alter the map editor's fog.

  Required:

    ID:
    - What is the ID of this fog to be added/changed?

    Filename:
    - What is the filename of the fog?

  Optional Settings:

    Scrolling:

      Map Lock?:
      - Lock the fog to the map's scrolling?
      - Automatically enable if the filename starts with "!"

      Loop Horizontally?:
      - Loop the fog horizontally?
      - Does not work with Map Lock enabled.

        Scroll:
        - What is the horizontal scroll speed?
        - Use a negative value to invert the direction.

      Loop Vertically?:
      - Loop the fog vertically?
      - Does not work with Map Lock enabled.

        Scroll:
        - What is the vertical scroll speed?
        - Use a negative value to invert the direction.

    Appearance:

      Opacity:
      - What is the opacity level for this fog?
      - You may use JavaScript code.

      Blend Mode:
      - What kind of blend mode do you wish to apply to the fog?
      - You may use JavaScript code.
        - Normal
        - Additive
        - Multiply
        - Screen

      Hue:
      - Do you wish to adjust this fog's hue?
      - You may use JavaScript code.

      Hue Shift:
      - How much do you want the hue to shift each frame?
      - You may use JavaScript code.

      Color Tone:
      - What tone do you want for the fog?
      - Format: [Red, Green, Blue, Gray]

    Location:

      Regions:
      - Which regions will show this fog?
      - Does not work with 0. Leave empty to ignore.

      Terrain Tags:
      - Which terrain tags will show this fog?
      - Does not work with 0. Leave empty to ignore.

      Tile Blur:
      - What's the blur level you wish to use for tiles?
      - You may use JavaScript code.

      Tile Spill:
      - What's the spill amount you wish to use for tiles?
      - You may use JavaScript code.

    Vignette:

      Type:
      - What vignette do you want to use for this fog?
      - This will override location settings.

      Custom:
      - Do you wish to use a custom vignette instead?
      - Automatically changes the type to "Custom".

---

VisualFogs Preview3.gif

VisualFogs Command2.png

Fog: Fade Opacity
- Fades the target fog(s) opacity to a different value.

  ID(s):
  - Target which fog(s)?
  - Cannot target the map editor's fog.

  Target Opacity:
  - What opacity level to this value (0-255).
  - You may use JavaScript code to determine the value.

  Duration:
  - How many frames should this change take?
  - You may use JavaScript code to determine the value.

---

VisualFogs Command3.png

Fog: Remove
- Removes target fog(s).

  ID(s):
  - Remove which fog(s)?
  - Cannot remove the map editor's fog.

---

Visual Novel Picture Busts VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Basic-Bust Plugin Commands

VNPicBust Basic EnterExitChange.gif

---

VNPicBust Basic Command1.png

BASIC: Enter Bust
- Generic entrance for ONE picture bust.
- Walks in from a little behind and fades in.

  Picture ID:
  - What is the Picture ID to associate with this bust?
  - You may use JavaScript code.

    Picture File:
    - What picture file do you wish to use?

    Origin:
    - What kind of origin setting do you wish to use for this bust?
    - Upper Left
    - Center
    - Bust

  Screen Position:
  - Insert a screen position value from 0 to 10.
  - Coordinates are determined by Plugin Parameters.
  - Refer to "Quick Understanding on How Busts Work" to understand how
    "Predetermined Positioning" positioning works by default.

    Start Offset X:
    - What starting position to enter the bust from?
    - Negative: behind; Positive: front.
    - You may use JavaScript.

    Start Offset Y:
    - What starting position to enter the bust from?
    - Negative: up; Positive: down.
    - You may use JavaScript.

    Entrance Easing:
    - Select which easing type you wish to apply.

  Horizontal Mirror:
  - Apply horizontal mirroring for this bust?
    - None
    - Mirror
    - Auto
    - Auto-Reverse

  Duration:
  - Duration in frames for the bust entrance.

---

VNPicBust Basic Command2.png

BASIC: Exit Bust(s)
- Generic exit for picture bust(s).
- Walks back and fades out.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

    End Offset X:
    - What end position to exit the bust to?
    - Negative: behind; Positive: front.
    - You may use JavaScript.

    End Offset Y:
    - What end position to exit the bust to?
    - Negative: up; Positive: down.
    - You may use JavaScript.

    Exit Easing:
    - Select which easing type you wish to apply.

    Flip Direction:
    - Flip direction when exiting?

  Duration:
  - Duration in frames for the bust exit.

  Auto-Erase?:
  - Automatically erase the bust(s) after fading out completely?

---

VNPicBust Basic Command3.png

BASIC: Graphic Change
- Changes ONE bust's graphic without changing any of its other properties.
- Useful for quickly changing facial expressions or poses.

  Picture ID:
  - What is the Picture ID to associate with this bust?
  - You may use JavaScript code.

  Picture File:
  - What picture file do you wish to use?

---

VNPicBust Basic Mirror.gif

VNPicBust Basic Command4.png

BASIC: Mirror Bust(s)
- Change the facing direction the bust(s).
- This alters the horizontal scaling of the bust(s).

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

  Horizontal Mirror:
  - How do you wish to affect the mirroring for the bust(s)?
    - None
    - Mirror
    - Auto
    - Auto-Reverse
    - Toggle

---

VNPicBust Basic Origin.gif

VNPicBust Basic Command5.png

BASIC: Origin Change Bust(s)
- Change the origin/anchor for bust(s).

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

    Origin:
    - Pick what kind of origin setting to use for this bust?
    - "Bust" value is based on Plugin Parameters.
      - Upper Left
      - Center
      - Bust

  Duration:
  - Duration in frames for the origin change.

---

VNPicBust Basic Animation.gif

VNPicBust Basic Command6.png

BASIC: Play Animation on Bust(s)
- Plays a specific battle animation on bust(s).

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

    Battle Animation ID:
    - Select which battle animation to play on bust.

      Mirror Animation?:
      - Mirror the animation effect?

  Wait For Animation?:
  - Wait until the animation is finished before continuing?

---

Breathing Plugin Commands

VNBusts Breathing.gif

---

VNBusts Update100 Command1.png

BREATHING: Start
- Starts breathing aspect for selected bust(s).
- Makes it look like the bust graphic is more alive.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

  Speed:

    Speed X:
    Speed Y:
    - Speed used for the horizontal/vertical breathing cycle.
    - Higher is slower.
    - You may use JavaScript.

  Rate:

    Rate X:
    Rate Y:
    - Rate used for the horizontal/vertical breathing cycle.
    - Determines change amount.
    - You may use JavaScript.

---

VNBusts Update100 Command2.png

BREATHING: Stop
- Stops breathing aspect for selected bust(s).
- The bust graphic becomes static.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

---

Fade-Bust Plugin Commands

VNPicBust Fading.gif

---

VNPicBust Fade Command1.png

FADE: Fade In Bust(s)
- Brings selected picture bust(s) opacity levels to 255.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

  Duration:
  - Duration in frames for the bust fade in.

---

VNPicBust Fade Command2.png

FADE: Fade Out Bust(s)
- Brings selected picture bust(s) opacity levels to 0.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

  Duration:
  - Duration in frames for the bust fade out.

    Auto-Erase?:
    - Automatically erase the bust(s) after fading out completely?

---

VNPicBust Fade Command3.png

FADE: Opacity By X, Bust(s)
- Adjusts selected picture bust(s) opacity levels relatively.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

  Adjust Opacity:
  - Adjust opacity value of pictures by this amount.
  - Negative: Lower, Positive: Higher.
  - You may use JavaScript.

  Duration:
  - Duration in frames for the bust fading.

---

VNPicBust Fade Command4.png

FADE: Opacity To X, Bust(s)
- Brings selected picture bust(s) opacity levels to a custom value.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

  Target Opacity:
  - What opacity value do you wish to adjust the bust to?
  - Use a value between 0 and 255.

  Duration:
  - Duration in frames for the bust fading.

---

Fidgeting Plugin Commands

VNBusts Fidgeting.gif

---

VNBusts Update100 Command3.png

FIDGETING: Start
- Starts fidgeting aspect for selected bust(s).
- Bust graphic moves back and forth.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

  Speed:

    Speed X:
    Speed Y:
    - Speed used for the horizontal/vertical fidgeting cycle.
    - Higher is slower.
    - You may use JavaScript.

  Distance:

    Distance X:
    Distance Y:
    - Max distance used for the horizontal/vertical fidgeting cycle.
    - Determines change amount.
    - You may use JavaScript.

---

VNBusts Update100 Command4.png

FIDGETING: Stop
- Stops fidgeting aspect for selected bust(s).
- The bust graphic becomes stationary.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

---

Movement-Bust Plugin Commands

VNPicBust Movement.gif

---

VNPicBust Movement Command1.png

MOVE: Move Bust(s) By Coordinates
- Move bust(s) relative to current coordinates(s).

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

    Move By X:
    - Negative: left; Positive: right; "Unchanged" for none.
    - You may use JavaScript.

    Move By Y:
    - Negative: up; Positive: down; "Unchanged" for none.
    - You may use JavaScript.

    Move Easing:
    - Select which easing type you wish to apply.

  Flip Direction:
  - Flip direction when moving?

  Duration:
  - Duration in frames for the bust movement.

---

VNPicBust Movement Command2.png

MOVE: Move Bust(s) By Position
- Move bust(s) relative to current position(s).

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

    Move By Position:
    - Negative: left; Positive: right; "Unchanged" for none.
    - You may use JavaScript.
    - Results between 0 and 10.

    Move Easing:
    - Select which easing type you wish to apply.

  Flip Direction:
  - Flip direction when moving?

  Duration:
  - Duration in frames for the bust movement.

---

VNPicBust Movement Command3.png

MOVE: Move Bust(s) to Coordinates
- Move bust(s) to exact coordinates(s).

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

    Target X:
    - Target X coordinate.
    - "Unchanged" for no changes.
    - You may use JavaScript.

    Target Y:
    - Target Y coordinate.
    - "Unchanged" for no changes.
    - You may use JavaScript.

    Move Easing:
    - Select which easing type you wish to apply.

  Flip Direction:
  - Flip direction when moving?

  Duration:
  - Duration in frames for the bust movement.

---

VNPicBust Movement Command4.png

MOVE: Move Bust(s) to Position
- Move bust(s) to the predetermined position.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

    Target Position:
    - Target predetermined position from 0 to 10.
    - You may use JavaScript.

    Move Easing:
    - Select which easing type you wish to apply.

  Flip Direction:
  - Flip direction when moving?

  Duration:
  - Duration in frames for the bust movement.

---

VNPicBust Movement Command5.png

MOVE: Reset Bust(s) to Position
- Reset bust(s) to the current position(s).

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

    Move Easing:
    - Select which easing type you wish to apply.

  Flip Direction:
  - Flip direction when moving?

  Duration:
  - Duration in frames for the bust movement.

---

Scaling-Bust Plugin Commands

VNPicBust Scaling.gif

---

VNPicBust Scaling Command1.png

SCALE: Scale Bust(s) By
- Scale bust(s) by specific amounts.
- Value scale: 100 = 100% = 1.0

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

    Scale X By:
    - Alter (additively) the X scaling value by this.
    - You may use JavaScript.

    Scale Y By:
    - Alter (additively) the Y scaling value by this.
    - You may use JavaScript.

  Duration:
  - Duration in frames for the bust scaling.

---

VNPicBust Scaling Command2.png

SCALE: Scale Bust(s) To
- Scale bust(s) to specific values.
- Value scale: 100 = 100% = 1.0

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

    Scale X By:
    - Set X scaling value to this.
    - You may use JavaScript.
    - "Unchanged" for no changes.

    Scale Y By:
    - Set Y scaling value to this.
    - You may use JavaScript.
    - "Unchanged" for no changes.

  Duration:
  - Duration in frames for the bust scaling.

---

VNPicBust Scaling Command3.png

SCALE: Scale Reset Bust(s)
- Resets the scale for bust(s) to the default settings in the
  Plugin Parameters.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

  Duration:
  - Duration in frames for the bust scaling.

---

Swaying Plugin Commands

VNBusts Swaying.gif

---

VNBusts Update100 Command5.png

SWAYING: Start
- Starts swaying aspect for selected bust(s).
- Bust graphic moves back and forth.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

  Speed:

    Angle Speed:
    - Speed used for the swaying cycle.
    - Higher is slower.
    - You may use JavaScript.

  Angle:

    Angle Sway:
    - Max angle used for the swaying cycle.
    - Determines change amount.
    - You may use JavaScript.

---

VNBusts Update100 Command6.png

SWAYING: Stop
- Stops swaying aspect for selected bust(s).
- The bust graphic becomes stationary.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

---

Tone/Tint-Bust Plugin Commands

VNPicBust Tone.gif

---

VNPicBust Tone Command1.png

TONE: Bright Bust(s)
- Brighten bust(s) to use the Tone settings found in the Plugin Parameters.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

  Duration:
  - Duration in frames for the tone change.

---

VNPicBust Tone Command2.png

TONE: Dim Bust(s)
- Dims bust(s) to use the Tone settings found in the Plugin Parameters.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

  Duration:
  - Duration in frames for the tone change.

---

VNPicBust Tone Command3.png

TONE: Normal Bust(s)
- Normalize bust(s) to no tone at all.

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

  Duration:
  - Duration in frames for the tone change.

---

VNPicBust Tone Command4.png

TONE: Preset Tone for Bust(s)
- Use RPG Maker MZ's present tones/tints for bust(s).

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

    Preset Name:
    - What tone preset do you wish to apply?
      - Normal
      - Dark
      - Sepia
      - Sunset
      - Night

  Duration:
  - Duration in frames for the tone change.

---

VNPicBust Tone Command5.png

TONE: Target Tone for Bust(s)
- Use a custom target tone for the bust(s).

  Picture ID(s):
  - What Picture ID(s) to associate with this command?
  - You may use JavaScript code.

    Custom Tone:
    - What tone do you want for the bust(s)?
    - Format: [Red, Green, Blue, Gray]

  Duration:
  - Duration in frames for the tone change.

---

Visual Text Window VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Text Window Plugin Commands

VisualTextWindow Preview1.png

---

VisualTextWindow Command1.png

Text Window: Add/Change Settings
- Adds a newly created visual text window to the scene.
- Or changes an existing one with new settings.

  Required:

    ID:
    - What is the ID of this Visual Text Window to be added/changed?

    Text:
    - What text would you like to display here?
    - Text codes can be used.

    Customized Settings:

      Coordinates:

        X:
        Y:
        - What is the X/Y coordinates of this window?
        - You may use JavaScript code.

        Width:
        Height:
        - What is the width/height of this window?
        - You may use JavaScript code. Type 'auto' to auto-size it.

      Alignment:

        Horizontal:
        - Window alignment based on the X coordinate?
        - This is NOT text alignment.
          - left
          - center
          - right

        Vertical:
        - Window alignment based on the Y coordinate?
        - This is NOT text alignment.
          - top
          - middle
          - bottom

      Appear:

        Auto-Color?
        - Enable Auto-Color for this Visual Text Window?

        Type:
        - How does this window appear on the screen if it was closed before?
          - Instant - Window appears instantly
          - Open - Window opens up

      Background:

        Type:
        - Select background type for this window.
          - Window
          - Dim
          - Transparent

        Opacity:
        - What is this window's background opacity level?
        - You may use JavaScript code.

---

VisualTextWindow Command2.png

Text Window: Refresh
- Refreshes target Visual Text Window(s) on the screen.

  ID(s):
  - Refresh which Visual Text Window(s)?

---

VisualTextWindow Command3.png

Text Window: Remove
- Remove target Visual Text Window(s) and its settings.

  ID(s):
  - Remove which Visual Text Window(s)?

  Removal Type:
  - How does this window disappear from the screen upon removal?
    - Instant - Window disappears instantly
    - Close - Window closes, then removes itself

---

Visual Parallaxes VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Parallax Plugin Commands

VisualParallaxes Preview1.gif

VisualParallaxes Command1.png

---

Parallax: Add/Change Settings
- Add/Change settings for target parallax.
- Does not alter the map editor's parallax.

  Required:

    ID:
    - What is the ID of this parallax to be added/changed?

    Filename:
    - What is the filename of the parallax?

    Type:
    - What kind of parallax is this going to be?
    - Normal
    - Water
    - Solid

  Optional Settings:

    Scrolling:

      Map Lock?:
      - Lock the parallax to the map's scrolling?
      - Automatically enable if the filename starts with "!"

      Loop Horizontally?:
      - Loop the parallax horizontally?
      - Does not work with Map Lock enabled.

        Scroll:
        - What is the horizontal scroll speed?
        - Use a negative value to invert the direction.

      Loop Vertically?:
      - Loop the parallax vertically?
      - Does not work with Map Lock enabled.

        Scroll:
        - What is the vertical scroll speed?
        - Use a negative value to invert the direction.

    Appearance:

      Opacity:
      - What is the opacity level for this parallax?
      - You may use JavaScript code.

      Blend Mode:
      - What kind of blend mode do you wish to apply to the parallax?
      - You may use JavaScript code.
        - Normal
        - Additive
        - Multiply
        - Screen

      Hue:
      - Do you wish to adjust this parallax's hue?
      - You may use JavaScript code.

      Hue Shift:
      - How much do you want the hue to shift each frame?
      - You may use JavaScript code.

      Color Tone:
      - What tone do you want for the parallax?
      - Format: [Red, Green, Blue, Gray]

    Location:

      Regions:
      - Which regions will show this parallax?
      - Does not work with 0. Leave empty to ignore.

      Terrain Tags:
      - Which terrain tags will show this parallax?
      - Does not work with 0. Leave empty to ignore.

---

VisualParallaxes Command2.png

Parallax: Fade Opacity
- Fades the target parallax(es) opacity to a different value.

  ID(s):
  - Target which parallax(es)?
  - Cannot target the map editor's parallax.

  Target Opacity:
  - What opacity level to this value (0-255).
  - You may use JavaScript code to determine the value.

  Duration:
  - How many frames should this change take?
  - You may use JavaScript code to determine the value.

---

VisualParallaxes Command3.png

Parallax: Remove
- Removes target parallax(es).

  ID(s):
  - Remove which parallax(es)?
  - Cannot remove the map editor's parallax.

---

End of List

Pages in category "Plugin Commands (MZ)"

The following 103 pages are in this category, out of 103 total.