Category:Plugin Commands (MZ)

Welcome to the wiki! This is where you can find resources from Yanfly.moe, Ækashics.moe,
VisuStella, Caz Wolf, Fallen Angel Olivia, Atelier Irina, and other affiliated content creators.

1 Core Engine VisuStella MZ
2 Battle Core VisuStella MZ
3 Elements and Status Menu Core VisuStella MZ
- 3.1 Actor Plugin Commands
- 3.2 Enemy Plugin Commands
4 Events and Movement Core VisuStella MZ
5 Items and Equips Core VisuStella MZ
6 Main Menu Core VisuStella MZ
- 6.1 Actor Plugin Commands
- 6.2 Menu Command Plugin Commands
7 Message Core VisuStella MZ
8 Save Core VisuStella MZ
- 8.1 Autosave Plugin Commands
- 8.2 Save Plugin Commands
9 End of List

Plugin Commands are event commands that are used to call upon functions added by a plugin that aren't inherently a part of RPG Maker MZ.

Here is a list of Plugin Command(s) that you may use:

---

Skills and items, when used in battle, have a pre-determined series of actions to display to the player as a means of representing what's going on with the action. For some game devs, this may not be enough and they would like to get more involved with the actions themselves.

Action Sequences, added through this plugin, enable this. To give a skill or item a Custom Action Sequence, a couple of steps must be followed:

---

1. Insert the <Custom Action Sequence> notetag into the skill or item's notebox (or else this would not work as intended). 2. Give that skill/item a Common Event through the Effects box. The selected Common Event will contain all the Action Sequence data. 3. Create the Common Event with Action Sequence Plugin Commands and/or event commands to make the skill/item do what you want it to do.

---

The Plugin Commands added through the Battle Core plugin focus entirely on Action Sequences. However, despite the fact that they're made for skills and items, some of these Action Sequence Plugin Commands can still be used for regular Troop events and Common Events.

---

Action Sequence - Action Sets

Action Sequence Action Sets are groups of commonly used Action Sequence Commands put together for more efficient usage.

---

ACSET: Setup Action Set
- The generic start to most actions.

  Display Action:
  Immortal: On:
  Battle Step:
  Wait For Movement:
  Cast Animation:
  Wait For Animation:
  - Use this part of the action sequence?

---

ACSET: All Targets Action Set
- Affects all targets simultaneously performing the following.

  Dual/Multi Wield?
  - Add times struck based on weapon quantity equipped?

  Perform Action:
  Wait Count:
  Action Animation:
  Wait For Animation:
  Action Effect:
  Immortal: Off:
  - Use this part of the action sequence?
  - Insert values for the Wait Count(s).

---

ACSET: Each Target Action Set
- Goes through each target one by one to perform the following.

  Dual/Multi Wield?
  - Add times struck based on weapon quantity equipped?

  Perform Action:
  Wait Count:
  Action Animation:
  Wait Count:
  Action Effect:
  Immortal: Off:
  - Use this part of the action sequence?
  - Insert values for the Wait Count(s).

---

ACSET: Finish Action
- The generic ending to most actions.

  Immortal: Off:
  Wait For New Line:
  Wait For Effects:
  Clear Battle Log:
  Home Reset:
  Wait For Movement:
  - Use this part of the action sequence?

---

Action Sequences - Angle (Camera)

These action sequences allow you to have control over the camera angle. Requires VisuMZ_3_ActSeqCamera!

---

ANGLE: Change Angle
- Changes the camera angle.
- Requires VisuMZ_3_ActSeqCamera!

  Angle:
  - Change the camera angle to this many degrees.

  Duration:
  - Duration in frames to change camera angle.

  Angle Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Angle?:
  - Wait for angle changes to complete before performing next command?

---

ANGLE: Reset Angle
- Reset any angle settings.
- Requires VisuMZ_3_ActSeqCamera!

  Duration:
  - Duration in frames to reset camera angle.

  Angle Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Angle?:
  - Wait for angle changes to complete before performing next command?

---

ANGLE: Wait For Angle
- Waits for angle changes to complete before performing next command.
- Requires VisuMZ_3_ActSeqCamera!

---

Action Sequences - Animations

These Action Sequences are related to the 'Animations' that can be found in the Animations tab of the Database.

---

ANIM: Action Animation
- Plays the animation associated with the action.

  Targets:
  - Select unit(s) to play the animation on.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Attack Animation
- Plays the animation associated with the user's weapon.

  Targets:
  - Select unit(s) to play the animation on.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Attack Animation 2+
- Plays the animation associated with the user's other weapons.
- Plays nothing if there is no other weapon equipped.

  Targets:
  - Select unit(s) to play the animation on.

  Slot:
  - Which weapon slot to get this data from?
  - Main-hand weapon is weapon slot 1.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Cast Animation
- Plays the cast animation associated with the action.

  Targets:
  - Select unit(s) to play the animation on.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Change Battle Portrait
- Changes the battle portrait of the actor (if it's an actor).
- Can be used outside of battle/action sequences.

  Targets:
  - Select unit(s) to play the animation on.
  - Valid units can only be actors.

  Filename:
  - Select the file to change the actor's portrait to.

---

ANIM: Play at Coordinate
- Plays an animation on the screen at a specific x, y coordinate.
- Requires VisuMZ_0_CoreEngine!

  Animation ID:
  - Plays this animation.

  Coordinates:

    X:
    Y:
    - X/Y coordinate used for the animation.
      You may use JavaScript code.

  Mirror Animation?:
  - Mirror the animation?

  Mute Animation?:
  - Mute the animation?

  Wait for Completion?:
  - Wait the animation to finish before continuing?

---

ANIM: Show Animation
- Plays the a specific animation on unit(s).

  Targets:
  - Select unit(s) to play the animation on.

  Animation ID:
  - Select which animation to play on unit(s).

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Wait For Animation
- Causes the interpreter to wait for any animation(s) to finish.

---

Action Sequences - Battle Log

These Action Sequences are related to the Battle Log Window, the window found at the top of the battle screen.

---

BTLOG: Add Text
- Adds a new line of text into the Battle Log.

  Text:
  - Add this text into the Battle Log.
  - Text codes allowed.

  Copy to Combat Log?:
  - Copies text to the Combat Log.
  - Requires VisuMZ_4_CombatLog

    Combat Log Icon:
    - What icon would you like to bind to this entry?
    - Requires VisuMZ_4_CombatLog

---

BTLOG: Clear Battle Log
- Clears all the text in the Battle Log.

---

BTLOG: Display Action
- plays the current action in the Battle Log.

---

BTLOG: Pop Base Line
- Removes the Battle Log's last added base line and  all text up to its
  former location.

---

BTLOG: Push Base Line
- Adds a new base line to where the Battle Log currently is at.

---

BTLOG: Refresh Battle Log
- Refreshes the Battle Log.

---

BTLOG: UI Show/Hide
- Shows or hides the Battle UI (including the Battle Log).

  Show/Hide?:
  - Shows/hides the Battle UI.

---

BTLOG: Wait For Battle Log
- Causes the interpreter to wait for the Battle Log to finish.

---

BTLOG: Wait For New Line
- Causes the interpreter to wait for a new line in the Battle Log.

---

Action Sequences - Camera

These Action Sequences are battle camera-related. Requires VisuMZ_3_ActSeqCamera!

---

CAMERA: Clamp ON/OFF
- Turns battle camera clamping on/off.
- Requires VisuMZ_3_ActSeqCamera!

  Setting:
  - Turns camera clamping on/off.

---

CAMERA: Focus Point
- Focus the battle camera on a certain point in the screen.
- Requires VisuMZ_3_ActSeqCamera!

  X Coordinate:
  - Insert the point to focus the camera on.
  - You may use JavaScript code.

  Y Coordinate:
  - Insert the point to focus the camera on.
  - You may use JavaScript code.

  Duration:
  - Duration in frames for camera focus change.

  Camera Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Camera?
  - Wait for camera changes to complete before performing next command?

---

CAMERA: Focus Target(s)
- Focus the battle camera on certain battler target(s).
- Requires VisuMZ_3_ActSeqCamera!

  Targets:
  - Select unit(s) to focus the battle camera on.

  Duration:
  - Duration in frames for camera focus change.

  Camera Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Camera?
  - Wait for camera changes to complete before performing next command?

---

CAMERA: Offset
- Offset the battle camera from the focus target.
- Requires VisuMZ_3_ActSeqCamera!

  Offset X:
  - How much to offset the camera X by.
  - Negative: left. Positive: right.

  Offset Y:
  - How much to offset the camera Y by.
  - Negative: up. Positive: down.

  Duration:
  - Duration in frames for offset change.

  Camera Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Camera?
  - Wait for camera changes to complete before performing next command?

---

CAMERA: Reset
- Reset the battle camera settings.
- Requires VisuMZ_3_ActSeqCamera!

  Reset Focus?:
  - Reset the focus point?

  Reset Offset?:
  - Reset the camera offset?

  Duration:
  - Duration in frames for reset change.

  Camera Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Camera?
  - Wait for camera changes to complete before performing next command?

---

CAMERA: Wait For Camera
- Waits for camera changes to complete before performing next command.
- Requires VisuMZ_3_ActSeqCamera!

---

Action Sequences - Dragonbones

These Action Sequences are Dragonbones-related. Requires VisuMZ_2_DragonbonesUnion!

---

DB: Dragonbones Animation
- Causes the unit(s) to play a Dragonbones motion animation.
- Requires VisuMZ_2_DragonbonesUnion!

  Targets:
  - Select which unit(s) to perform a motion animation.

  Motion Animation:
  - What is the name of the Dragonbones motion animation you wish to play?

---

DB: Dragonbones Time Scale
- Causes the unit(s) to change their Dragonbones time scale.
- Requires VisuMZ_2_DragonbonesUnion!

  Targets:
  - Select which unit(s) to perform a motion animation.

  Time Scale:
  - Change the value of the Dragonbones time scale to this.

---

Action Sequences - Elements

These Action Sequences can change up the element(s) used for the action's damage calculation midway through an action.

They also require the VisuMZ_1_ElementStatusCore plugin to be present in order for them to work.

---

ELE: Add Elements
- Adds element(s) to be used when calculating damage.
- Requires VisuMZ_1_ElementStatusCore!

  Elements:
  - Select which element ID to add onto the action.
  - Insert multiple element ID's to add multiple at once.

---

ELE: Clear Element Changes
- Clears all element changes made through Action Sequences.
- Requires VisuMZ_1_ElementStatusCore!

---

ELE: Force Elements
- Forces only specific element(s) when calculating damage.
- Requires VisuMZ_1_ElementStatusCore!

  Elements:
  - Select which element ID to force in the action.
  - Insert multiple element ID's to force multiple at once.

---

ELE: Null Element
- Forces no element to be used when calculating damage.
- Requires VisuMZ_1_ElementStatusCore!

---

Action Sequences - Horror Effects

These Action Sequences are Horror Effects-related.

Requires VisuMZ_2_HorrorEffects!

---

HORROR: Clear All Filters
- Clear all Horror Effects filters on the target battler(s).

  Targets:
  - Select unit(s) to remove Horror Effects for.

---

HORROR: Glitch Create
- Creates the glitch effect on the target battler(s).

  Targets:
  - Select unit(s) to create the Horror Effect for.

  Glitch Slices:
  - Glitch slices to be used with the target.

  Glitch Offset:
  - Default offset value.

  Glitch Animated?:
  - Animate the glitch effect?

  Glitch Frequency:
  - If animated, how frequent to make the glitch effect?
  - Lower = often     Higher = rarer

  Glitch Strength:
  - If animated, how strong is the glitch effect?
  - Lower = weaker     Higher = stronger

---

HORROR: Glitch Remove
- Removes the glitch effect on the target battler(s).

  Targets:
  - Select unit(s) to remove the Horror Effect for.

---

HORROR: Noise Create
- Creates the noise effect on the target battler(s).

  Targets:
  - Select unit(s) to create the Horror Effect for.

  Noise Rate:
  - Noise rate to be used with the target.

  Noise Animated:
  - Animate the noise for the target?

---

HORROR: Noise Remove
- Removes the noise effect on the target battler(s).

  Targets:
  - Select unit(s) to remove the Horror Effect for.

---

HORROR: TV Create
- Creates the TV effect on the target battler(s).

  Targets:
  - Select unit(s) to create the Horror Effect for.

  TV Line Thickness:
  - Default TV line thickness
  - Lower = thinner     Higher = thicker

  TV Corner Size:
  - Default TV line corner size
  - Lower = smaller     Higher = bigger

  TV Animated:
  - Animate the TV?

  TV Speed:
  - Speed used to animate the TV if animated
  - Lower = slower     Higher = faster

---

HORROR: TV Remove
- Removes the TV effect on the target battler(s).

  Targets:
  - Select unit(s) to remove the Horror Effect for.

---

Action Sequences - Impact

These Action Sequences are related to creating impact.

Requires VisuMZ_3_ActSeqImpact!

---

IMPACT: Bizarro Inversion
- Swaps blue/red colors on the battlefield.
- Requires VisuMZ_3_ActSeqImpact!

  Bizarro?:
  - Enable Bizarro Inversion effect?

---

IMPACT: Color Break
- Breaks the colors on the screen before reassembling.
- Requires VisuMZ_3_ActSeqImpact!

  Intensity:
  - What is the intensity of the color break effect?

  Duration:
  - What is the duration of the color break effect?

  Easing Type:
  - Select which easing type you wish to apply.

---

IMPACT: Desaturation
- Desaturates all colors on the battlefield.
- Requires VisuMZ_3_ActSeqImpact!
- Created by Manu Gaming!

  Desaturate?:
  - Enable Desaturation effect?

---

IMPACT: Motion Blur Screen
- Creates a motion blur on the whole screen.
- Requires VisuMZ_3_ActSeqImpact!

  Angle:
  - Determine what angle to make the motion blur at.

  Intensity Rate:
  - This determines intensity rate of the motion blur.
  - Use a number between 0 and 1.

  Duration:
  - How many frames should the motion blur last?
  - What do you want to be its duration?

  Easing Type:
  - Select which easing type you wish to apply.

---

IMPACT: Motion Blur Target(s)
- Creates a motion blur on selected target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to create motion blur effects for.

  Angle:
  - Determine what angle to make the motion blur at.

  Intensity Rate:
  - This determines intensity rate of the motion blur.
  - Use a number between 0 and 1.

  Duration:
  - How many frames should the motion blur last?
  - What do you want to be its duration?

  Easing Type:
  - Select which easing type you wish to apply.

---

IMPACT: Motion Trail Create
- Creates a motion trail effect for the target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to create motion trail effects for.

  Delay:
  - How many frames to delay by when creating a motion trail?
  - The higher the delay, the less motion trails there are.

  Duration:
  - How many frames should the motion trail last?
  - What do you want to be its duration?

  Hue:
  - What do you want to be the hue for the motion trail?

  Starting Opacity:
  - What starting opacity value do you want for the motion trail?
  - Opacity values decrease over time.

  Tone:
  - What tone do you want for the motion trail?
  - Format: [Red, Green, Blue, Gray]

---

IMPACT: Motion Trail Remove
- Removes the motion trail effect from the target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to clear motion trail effects for.

---

IMPACT: Negative Inversion
- Inverts all the colors on the battlefield.
- Requires VisuMZ_3_ActSeqImpact!
- Created by Manu Gaming!

  Negative?:
  - Enable Negative Inversion effect?

---

IMPACT: Oversaturation
- Oversaturates colors on the battlefield.
- Requires VisuMZ_3_ActSeqImpact!

  Oversaturate?:
  - Enable Oversaturation effect?

---

IMPACT: Shockwave at Point
- Creates a shockwave at the designated coordinates.
- Requires VisuMZ_3_ActSeqImpact!

  Point: X:
  Point: Y:
  - What x/y coordinate do you want to create a shockwave at?
  - You can use JavaScript code.

  Amplitude:
  - What is the aplitude of the shockwave effect?

  Wavelength:
  - What is the wavelength of the shockwave effect?

  Duration:
  - What is the duration of the shockwave?

---

IMPACT: Shockwave from Each Target(s)
- Creates a shockwave at each of the target(s) location(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to start a shockwave from.

  Target Location:
  - Select which part target group to start a shockwave from.

    Offset X:
    Offset Y:
    - How much to offset the shockwave X/Y point by.

  Amplitude:
  - What is the aplitude of the shockwave effect?

  Wavelength:
  - What is the wavelength of the shockwave effect?

  Duration:
  - What is the duration of the shockwave?

---

IMPACT: Shockwave from Target(s) Center
- Creates a shockwave from the center of the target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to start a shockwave from.

  Target Location:
  - Select which part target group to start a shockwave from.

    Offset X:
    Offset Y:
    - How much to offset the shockwave X/Y point by.

  Amplitude:
  - What is the aplitude of the shockwave effect?

  Wavelength:
  - What is the wavelength of the shockwave effect?

  Duration:
  - What is the duration of the shockwave?

---

IMPACT: Time Scale
- Adjust time to go faster or slower!
- Requires VisuMZ_3_ActSeqImpact!
- Created by Manu Gaming!

  Scale:
  - Adjusts how fast/slow time goes.
  - 1.00 is normal. Lower is slower. Higher is faster.

---

IMPACT: Time Stop
- Stops time for a set amount of milliseconds.
- Requires VisuMZ_3_ActSeqImpact!
- Created by Manu Gaming!

  Milliseconds:
  - How many milliseconds should time stop for?
  - 1000 milliseconds = 1 second.

---

IMPACT: Zoom Blur at Point
- Creates a zoom blur at the designated coordinates.
- Requires VisuMZ_3_ActSeqImpact!

  Point: X:
  Point: Y:
  - What x/y coordinate do you want to focus the zoom at?
  - You can use JavaScript code.

  Zoom Strength:
  - What is the strength of the zoom effect?
  - Use a number between 0 and 1.

  Visible Radius:
  - How much of a radius should be visible from the center?

  Duration:
  - What is the duration of the zoom blur?

  Easing Type:
  - Select which easing type you wish to apply.

---

IMPACT: Zoom Blur at Target(s) Center
- Creates a zoom blur at the center of targets.
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to start a zoom blur from.

  Target Location:
  - Select which part target group to start a zoom blur from.

    Offset X:
    Offset Y:
    - How much to offset the zoom blur X/Y point by.

  Zoom Strength:
  - What is the strength of the zoom effect?
  - Use a number between 0 and 1.

  Visible Radius:
  - How much of a radius should be visible from the center?

  Duration:
  - What is the duration of the zoom blur?

  Easing Type:
  - Select which easing type you wish to apply.

---

Action Sequences - Inject

These Action Sequences are related to injecting sprite animations. Requires VisuMZ_3_ActSeqImpact!

---

INJECT: Animation Begin
- Injects and plays a whole spritesheet animation.
- The spritesheet animation will play over the battler until it is finished.
- The battler's original sprite will be invisible until finished.
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to inject the animation on.

  Filename:
  - Select the animation spritesheet file.
  - Located in the /img/sv_actors/ folder.

    Horizontal Cells:
    - How many horizontal cells (or columns) are there?

    Vertical Cells:
    - How many vertical cells (or rows) are there?

    Frame Delay:
    - How many frames are played inbetween cells?

    Smooth Bitmap?:
    - Smooth the spritesheet graphic?

  Offset:

    Offset X:
    - Offsets the X position of the injected animation.
    - Negative: left. Positive: right.

    Offset Y:
    - Offsets the Y position of the injected animation.
    - Negative: up. Positive: down.

---

INJECT: Animation End
- Stops and ends any injected animations on target(s).
- Any inject animation will be prematurely terminated.
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to stop injected animation(s).

---

INJECT: Animation Pause/Resume
- Pauses/resumes any injected animations on target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to pause/resume injected animation(s).

  Pause?:
  - Pause the injected animation?

---

INJECT: Wait For Injected Animation
- Waits for injected animations to complete before performing next command.
- Requires VisuMZ_3_ActSeqImpact!

---

Action Sequences - Mechanics

These Action Sequences are related to various mechanics related to the battle system.

---

MECH: Action Effect
- Causes the unit(s) to take damage/healing from action and incurs any
  changes made such as buffs and states.

  Targets:
  - Select unit(s) to receive the current action's effects.

---

MECH: Active Chain Input Disable
- Disables input for Active Chain Skills at this time.
- Requires VisuMZ_3_ActiveChainSkills!

---

MECH: Add Buff/Debuff
- Adds buff(s)/debuff(s) to unit(s).
- Determine which parameters are affected and their durations.

  Targets:
  - Select unit(s) to receive the buff(s) and/or debuff(s).

  Buff Parameters:
  - Select which parameter(s) to buff.
  - Insert a parameter multiple times to raise its stacks.

  Debuff Parameters:
  - Select which parameter(s) to debuff.
  - Insert a parameter multiple times to raise its stacks.

  Turns:
  - Number of turns to set the parameter(s) buffs to.
  - You may use JavaScript code.

---

MECH: Add State
- Adds state(s) to unit(s).

  Targets:
  - Select unit(s) to receive the buff(s).

  States:
  - Select which state ID(s) to add to unit(s).
  - Insert multiple state ID's to add multiple at once.

---

MECH: Analyze Weakness
- Reveal elemental weakness(es) from target(s).
- Requires VisuMZ_3_WeaknessDisplay!

  Targets:
  - Select unit(s) to reveal elemental weaknesses for.

  Reveal:
  - How many elemental weaknesses do you wish to reveal?
  - You may use JavaScript code.

---

MECH: Armor Penetration
- Adds an extra layer of defensive penetration/reduction.
- You may use JavaScript code for any of these.

  Armor/Magic Penetration:

    Rate:
    - Penetrates an extra multiplier of armor by this value.

    Flat:
    - Penetrates a flat amount of armor by this value.

  Armor/Magic Reduction:

    Rate:
    - Reduces an extra multiplier of armor by this value.

    Flat:
    - Reduces a flat amount of armor by this value.

---

MECH: ATB Gauge
- Alters the ATB/TPB Gauges.
- Requires VisuMZ_2_BattleSystemATB!

  Targets:
  - Select unit(s) to alter the ATB/TPB Gauges for.

  Charging:

    Charge Rate:
    - Changes made to the ATB Gauge if it is currently charging.

  Casting:

    Cast Rate:
    - Changes made to the ATB Gauge if it is currently casting.

    Interrupt?:
    - Interrupt the ATB Gauge if it is currently casting?

---

MECH: Boost Points Change
- Changes Boost Points for target(s).
- Requires VisuMZ_3_BoostAction!

  Targets:
  - Select unit(s) to alter the Boost Points for.

  Alter Boost Points By:
  - Alters the unit(s) Boost Points.
  - Positive for gaining points. Negative for losing points.

---

MECH: Boost Store Data
- Stores the number of Boosts used this action inside a variable.
- Requires VisuMZ_3_BoostAction!

  Variable ID:
  - Which variable do you want to store the data inside?

---

MECH: Break Shield Change
- Changes Break Shields for target(s) if not Break Stunned.
- Requires VisuMZ_4_BreakShields!

  Targets:
  - Select unit(s) to alter the Break Shields for.

  Alter Break Shields By:
  - Alters the unit(s) Break Shields.
  - Positive for gaining shields. Negative for losing shields.

---

MECH: Break Shield Reset
- Resets Break Shields for target(s) if not Break Stunned.
- Requires VisuMZ_4_BreakShields!

  Targets:
  - Select unit(s) to reset the Break Shields for.

---

MECH: BTB Brave Points
- Alters the target(s) Brave Points to an exact value.
- Requires VisuMZ_2_BattleSystemBTB!

  Targets:
  - Select unit(s) to alter the ATB/TPB Gauges for.

  Alter Brave Points By:
  - Alters the target(s) Brave Points.
  - Positive for gaining BP.
  - Negative for losing BP.

---

MECH: Collapse
- Causes the unit(s) to perform its collapse animation if the unit(s)
  has died.

  Targets:
  - Select unit(s) to process a death collapse.

  Force Death:
  - Force death even if the unit has not reached 0 HP?
  - This will remove immortality.

  Wait For Effect?:
  - Wait for the collapse effect to complete before performing next command?

---

MECH: CTB Order
- Alters the CTB Turn Order.
- Requires VisuMZ_2_BattleSystemCTB!

  Targets:
  - Select unit(s) to alter the CTB Turn Order for.

  Change Order By:
  - Changes turn order for target(s) by this amount.
  - Positive increases wait. Negative decreases wait.

---

MECH: CTB Speed
- Alters the CTB Speed.
- Requires VisuMZ_2_BattleSystemCTB!

  Targets:
  - Select unit(s) to alter the CTB Speed for.

  Charge Rate:
  - Changes made to the CTB Speed if it is currently charging.

  Cast Rate:
  - Changes made to the CTB Speed if it is currently casting.

---

MECH: Custom Damage Formula
- Changes the current action's damage formula to custom.
- This will assume the MANUAL damage style.

  Formula:
  - Changes the current action's damage formula to custom.
  - Use 'default' to revert the damage formula.

---

MECH: Damage Popup
- Causes the unit(s) to display the current state of damage received
  or healed.

  Targets:
  - Select unit(s) to prompt a damage popup.

---

MECH: Enemy Escape
- Causes the enemy unit(s) to escape.

  Targets:
  - Select unit(s) to escape.

---

MECH: Dead Label Jump
- If the active battler is dead, jump to a specific label in the
  common event.

  Jump To Label:
  - If the active battler is dead, jump to this specific label in the
    common event.

---

MECH: ETB Energy Count
- Alters the subject team's available Energy Count.
- Requires VisuMZ_2_BattleSystemETB!

  Energy Count:
  - Alters the subject team's available Energy Count.
  - Positive for gaining energy. Negative for losing energy.

---

MECH: FTB Action Count
- Alters the subject team's available Action Count.
- Requires VisuMZ_2_BattleSystemFTB!

  Action Count:
  - Alters the subject team's available Action Count.
  - Positive for gaining actions. Negative for losing actions.

---

MECH: HP, MP, TP
- Alters the HP, MP, and TP values for unit(s).
- Positive values for healing. Negative values for damage.

  Targets:
  - Select unit(s) to receive the current action's effects.

  HP, MP, TP:

    Rate:
    - Changes made to the parameter based on rate.
    - Positive values for healing. Negative values for damage.

    Flat:
    - Flat changes made to the parameter.
    - Positive values for healing. Negative values for damage.

  Damage Popup?:
  - Display a damage popup after?

---

MECH: Immortal
- Changes the immortal flag of targets. If immortal flag is removed and a
  unit would die, collapse that unit.

  Targets:
  - Alter the immortal flag of these groups. If immortal flag is removed and
    a unit would die, collapse that unit.

  Immortal:
  - Turn immortal flag for unit(s) on/off?

---

MECH: Multipliers
- Changes the multipliers for the current action.
- You may use JavaScript code for any of these.

  Critical Hit%:

    Rate:
    - Affects chance to land a critical hit by this multiplier.

    Flat:
    - Affects chance to land a critical hit by this flat bonus.

  Critical Damage

    Rate:
    - Affects critical damage by this multiplier.

    Flat:
    - Affects critical damage by this flat bonus.

  Damage/Healing

    Rate:
    - Sets the damage/healing multiplier for current action.

    Flat:
    - Sets the damage/healing bonus for current action.

  Hit Rate

    Rate:
    - Affects chance to connect attack by this multiplier.

    Flat:
    - Affects chance to connect attack by this flat bonus.

---

MECH: Once Parallel
- Plays a Common Event parallel to the battle event once without repeating
  itself when done.

  Common Event ID:
  - The ID of the parallel Common Event to play.
  - Does NOT repeat itself when finished.
  - When exiting battle scene, all Once Parallels are cleared.
  - Once Parallels are not retained upon reentering the scene.
  - Once Parallels are not stored in memory and cannot be saved.

---

MECH: OTB Order
- Alters the OTB Turn Order. Best used with single targets.
- Requires VisuMZ_2_BattleSystemOTB!

  Targets:
  - Select unit(s) to alter the OTB Turn Order for.

  Current Turn By:
  - Changes turn order for target(s) by this amount.
  - Positive increases wait. Negative decreases wait.

  Next Turn By:
  - Changes turn order for target(s) by this amount.
  - Positive increases wait. Negative decreases wait.

  Follow Turn By:
  - Changes turn order for target(s) by this amount.
  - Positive increases wait. Negative decreases wait.

---

MECH: PTB Alter Cost
- Alters the action's cost settings.
- Requires VisuMZ_2_BattleSystemPTB!

  Override?:
  - Overrides any 'permanent' settings for Changeability?

  Alter Changeability:
  - Allow the cost type and value to be changeable?

  Alter Cost Type:
  - Change the cost type to this scenario.
  - Use 'Unchanged' for no changes.

  Alter Cost Value:
  - What is the default action cost for this scenario?

---

MECH: PTB Conversion
- Converts full actions into half actions.
- Requires VisuMZ_2_BattleSystemPTB!

  Conversion Count:
  - Converts full actions into half actions.
  - If not enough, consume half actions.

---

MECH: PTB Full/Half Action(s)
- Alters the subject team's available Full/Half Actions.
- Requires VisuMZ_2_BattleSystemPTB!

  Full Actions:
  - Alters the subject team's available Full Actions.
  - Positive for gaining. Negative for losing.

  Half Actions:
  - Alters the subject team's available Half Actions.
  - Positive for gaining. Negative for losing.

---

MECH: Remove Buff/Debuff
- Removes buff(s)/debuff(s) from unit(s).
- Determine which parameters are removed.

  Targets:
  - Select unit(s) to have the buff(s) and/or debuff(s) removed.

  Buff Parameters:
  - Select which buffed parameter(s) to remove.

  Debuff Parameters:
  - Select which debuffed parameter(s) to remove.

---

MECH: Remove State
- Remove state(s) from unit(s).

  Targets:
  - Select unit(s) to have states removed from.

  States:
  - Select which state ID(s) to remove from unit(s).
  - Insert multiple state ID's to remove multiple at once.

---

MECH: STB Exploit Effect
- Utilize the STB Exploitation mechanics!
- Requires VisuMZ_2_BattleSystemSTB!

  Target(s) Exploited?:
  - Exploit the below targets?

    Targets:
    - Select unit(s) to become exploited.

    Force Exploitation:
    - Force the exploited status?

  User Exploiter?:
  - Allow the user to become the exploiter?

    Force Exploitation:
    - Force the exploiter status?

---

MECH: STB Extra Action
- Adds an extra action for the currently active battler.
- Requires VisuMZ_2_BattleSystemSTB!

  Extra Actions:
  - How many extra actions should the active battler gain?
  - You may use JavaScript code.

---

MECH: STB Remove Excess Actions
- Removes excess actions from the active battler.
- Requires VisuMZ_2_BattleSystemSTB!

  Remove Actions:
  - How many actions to remove from the active battler?
  - You may use JavaScript code.

---

MECH: Swap Weapon
- Causes the unit(s) to swap their weapon for another.
- Requires VisuMZ_2_WeaponSwapSystem!

  Targets:
  - Select unit(s) to swap weapons for.

  Weapon Type ID:
  - Which weapon type to swap to?
  - This is NOT the weapon's ID.
  - It's the weapon TYPE.

---

MECH: Text Popup
- Causes the unit(s) to display a text popup.

  Targets:
  - Select unit(s) to prompt a text popup.

  Text:
  - What text do you wish to display?

  Text Color:
  - Use #rrggbb for custom colors or regular numbers for text colors from
    the Window Skin.

  Flash Color:
  - Adjust the popup's flash color.
  - Format: [red, green, blue, alpha]

  Flash Duration:
  - What is the frame duration of the flash effect?

---

MECH: Variable Popup
- Causes the unit(s) to display a popup using the data stored inside
  a variable.

  Targets:
  - Select unit(s) to prompt a text popup.

  Variable:
  - Get data from which variable to display as a popup?

  Digit Grouping:
  - Use digit grouping to separate numbers?
  - Requires VisuMZ_0_CoreEngine!

  Text Color:
  - Use #rrggbb for custom colors or regular numbers for text colors from
    the Window Skin.

  Flash Color:
  - Adjust the popup's flash color.
  - Format: [red, green, blue, alpha]

  Flash Duration:
  - What is the frame duration of the flash effect?

---

MECH: Wait For Effect
- Waits for the effects to complete before performing next command.

---

Action Sequences - Motion

These Action Sequences allow you the ability to control the motions of sideview sprites.

---

MOTION: Clear Freeze Frame
- Clears any freeze frames from the unit(s).

  Targets:
  - Select which unit(s) to clear freeze frames for.

---

MOTION: Freeze Motion Frame
- Forces a freeze frame instantly at the selected motion.
- Automatically clears with a new motion.

  Targets:
  - Select which unit(s) to freeze motions for.

  Motion Type:
  - Freeze this motion for the unit(s).

  Frame Index:
  - Which frame do you want to freeze the motion on?
  - Frame index values start at 0.

  Show Weapon?:
  - If using 'attack', 'thrust', 'swing', or 'missile', display the
    weapon sprite?

---

MOTION: Motion Type
- Causes the unit(s) to play the selected motion.

  Targets:
  - Select which unit(s) to perform a motion.

  Motion Type:
  - Play this motion for the unit(s).

  Show Weapon?:
  - If using 'attack', 'thrust', 'swing', or 'missile', display the
    weapon sprite?

---

MOTION: Perform Action
- Causes the unit(s) to play the proper motion based on the current action.

  Targets:
  - Select which unit(s) to perform a motion.

---

MOTION: Refresh Motion
- Cancels any set motions unit(s) has to do and use their most natural
  motion at the moment.

  Targets:
  - Select which unit(s) to refresh their motion state.

---

MOTION: Wait By Motion Frame
- Creates a wait equal to the number of motion frames passing.
- Time is based on Plugin Parameters => Actors => Motion Speed.

  Motion Frames to Wait?:
  - Each "frame" is equal to the value found in
    Plugin Parameters => Actors => Motion Speed

---

Action Sequences - Movement

These Action Sequences allow you the ability to control the sprites of actors and enemies in battle.

---

MOVE: Battle Step
- Causes the unit(s) to move forward past their home position to prepare
  for action.

  Targets:
  - Select which unit(s) to move.

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Change Home By Distance
- Change unit(s)'s home position by a distance from their current home
  position(s).
- Sideview-only!

  Targets:
  - Select which unit(s) to change home position(s) for.

  Distance Adjustment:
  - Makes adjustments to distance values to determine which direction to
    change by.
    - Normal - No adjustments made
    - Horizontal - Actors adjust left, Enemies adjust right
    - Vertical - Actors adjust Up, Enemies adjust down
    - Both - Applies both Horizontal and Vertical

    Distance: X:
    - Horizontal distance to move.
    - You may use JavaScript code.

    Distance: Y:
    - Vertical distance to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total change amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Change Home To JS Coordinates
- Change home position(s) to specified JS Coordinates.
- Sideview-only! Uses JavaScript!

  Targets:
  - Select which unit(s) to change home position(s) for.

  JS: Coordinates:
  - Code used to determine the coordinates for the target(s)'s new home
    position.

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total change amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Change Home To Point
- Change home position(s) to a target point on the screen.
- Sideview-only! Points based off Graphics.boxWidth/Height.

  Targets:
  - Select which unit(s) to change home position(s) for.

  Destination Point:
  - Select which point to face.
    - Center
    - Point X, Y
      - Replace 'x' and 'y' with coordinates

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total change amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Change Home To Target(s)
- Moves unit(s) to another unit(s) on the battle field.
- Sideview-only!

  Targets (Moving):
  - Select which unit(s) to change home position(s) for.

  Targets (Destination):
  - Select which unit(s) to change home position to.

    Target Location:
    - Select which part target group to change home position to.
      - front head
      - front center
      - front base
      - middle head
      - middle center
      - middle base
      - back head
      - back center
      - back base

    Melee Distance:
    - The melee distance away from the target location in addition to the
      battler's width.

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total change amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Face Direction
- Causes the unit(s) to face forward or backward.
- Sideview-only!

  Targets:
  - Select which unit(s) to change direction.

  Direction:
  - Select which direction to face.

---

MOVE: Face JS Coordinates
- Causes the unit(s) to face specified JS Coordinates.
- Sideview-only! Uses JavaScript!

  Targets:
  - Select which unit(s) to change direction.

  JS: Coordinates:
  - Code used to determine the coordinates for the target(s) to face
    towards.

  Face Away From?:
  - Face away from the point instead?

---

MOVE: Face Point
- Causes the unit(s) to face a point on the screen.
- Sideview-only!

  Targets:
  - Select which unit(s) to change direction.

  Point:
  - Select which point to face.
    - Home
    - Center
    - Point X, Y
      - Replace 'x' and 'y' with coordinates

  Face Away From?:
  - Face away from the point instead?

---

MOVE: Face Target(s)
- Causes the unit(s) to face other targets on the screen.
- Sideview-only!

  Targets (facing):
  - Select which unit(s) to change direction.

  Targets (destination):
  - Select which unit(s) for the turning unit(s) to face.

  Face Away From?:
  - Face away from the unit(s) instead?

---

MOVE: Float
- Causes the unit(s) to float above the ground.
- Sideview-only!

  Targets:
  - Select which unit(s) to make float.

  Desired Height:
  - Vertical distance to float upward.
  - You may use JavaScript code.

  Duration:
  - Duration in frames for total float amount.

  Float Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Float?:
  - Wait for floating to complete before performing next command?

---

MOVE: Home Reset
- Causes the unit(s) to move back to their home position(s) and face back to
  their original direction(s).

  Targets:
  - Select which unit(s) to move.

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Jump
- Causes the unit(s) to jump into the air.
- Sideview-only!

  Targets:
  - Select which unit(s) to make jump.

  Desired Height:
  - Max jump height to go above the ground
  - You may use JavaScript code.

  Duration:
  - Duration in frames for total jump amount.

  Wait For Jump?:
  - Wait for jumping to complete before performing next command?

---

MOVE: Move Distance
- Moves unit(s) by a distance from their current position(s).
- Sideview-only!

  Targets:
  - Select which unit(s) to move.

  Distance Adjustment:
  - Makes adjustments to distance values to determine which direction to
    move unit(s).
    - Normal - No adjustments made
    - Horizontal - Actors adjust left, Enemies adjust right
    - Vertical - Actors adjust Up, Enemies adjust down
    - Both - Applies both Horizontal and Vertical

    Distance: X:
    - Horizontal distance to move.
    - You may use JavaScript code.

    Distance: Y:
    - Vertical distance to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total movement amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Move To JS Coordinates
- Moves unit(s) to specified JS Coordinates.
- Sideview-only! Uses JavaScript!

  Targets:
  - Select which unit(s) to move.

  JS: Coordinates:
  - Code used to determine the coordinates for the target(s) to move to.

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total movement amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Move To Point
- Moves unit(s) to a designated point on the screen.
- Sideview-only! Points based off Graphics.boxWidth/Height.

  Targets:
  - Select which unit(s) to move.

  Destination Point:
  - Select which point to face.
    - Home
    - Center
    - Point X, Y
      - Replace 'x' and 'y' with coordinates

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total movement amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Move To Target(s)
- Moves unit(s) to another unit(s) on the battle field.
- Sideview-only!

  Targets (Moving):
  - Select which unit(s) to move.

  Targets (Destination):
  - Select which unit(s) to move to.

    Target Location:
    - Select which part target group to move to.
      - front head
      - front center
      - front base
      - middle head
      - middle center
      - middle base
      - back head
      - back center
      - back base

    Melee Distance:
    - The melee distance away from the target location in addition to the
      battler's width.

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total movement amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Opacity
- Causes the unit(s) to change opacity.
- Sideview-only!

  Targets:
  - Select which unit(s) to change opacity.

  Desired Opacity:
  - Change to this opacity value.
  - You may use JavaScript code.

  Duration:
  - Duration in frames for opacity change.

  Opacity Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Opacity?:
  - Wait for opacity changes to complete before performing next command?

---

MOVE: Scale/Grow/Shrink
- Causes the unit(s) to scale, grow, or shrink?.
- Sideview-only!

  Targets:
  - Select which unit(s) to change the scale of.

  Scale X:
  Scale Y:
  - What target scale value do you want?
  - 1.0 is normal size.

  Duration:
  - Duration in frames to scale for.

  Scale Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Scale?:
  - Wait for scaling to complete before performing next command?

---

MOVE: Skew/Distort
- Causes the unit(s) to skew.
- Sideview-only!

  Targets:
  - Select which unit(s) to skew.

  Skew X:
  Skew Y:
  - What variance to skew?
  - Use small values for the best results.

  Duration:
  - Duration in frames to skew for.

  Skew Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Skew?:
  - Wait for skew to complete before performing next command?

---

MOVE: Spin/Rotate
- Causes the unit(s) to spin.
- Sideview-only!

  Targets:
  - Select which unit(s) to spin.

  Angle:
  - How many degrees to spin?

  Duration:
  - Duration in frames to spin for.

  Spin Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Revert Angle on Finish:
  - Upon finishing the spin, revert the angle back to 0.

  Wait For Spin?:
  - Wait for spin to complete before performing next command?

---

MOVE: Wait For Float
- Waits for floating to complete before performing next command.

---

MOVE: Wait For Jump
- Waits for jumping to complete before performing next command.

---

MOVE: Wait For Movement
- Waits for movement to complete before performing next command.

---

MOVE: Wait For Opacity
- Waits for opacity changes to complete before performing next command.

---

MOVE: Wait For Scale
- Waits for scaling to complete before performing next command.

---

MOVE: Wait For Skew
- Waits for skewing to complete before performing next command.

---

MOVE: Wait For Spin
- Waits for spinning to complete before performing next command.

---

Action Sequences - Projectiles

Create projectiles on the screen and fire them off at a target. Requires VisuMZ_3_ActSeqProjectiles!

---

PROJECTILE: Animation
- Create an animation projectile and fire it at a target.
- Requires VisuMZ_3_ActSeqProjectiles!

  Coordinates:

    Start Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should start from.
        - Target - Start from battler target(s)
        - Point - Start from a point on the screen

        Target(s):
        - Select which unit(s) to start the projectile from.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile from.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to start the projectile at.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

    Goal Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should go to.
        - Target - Goal is battler target(s)
        - Point - Goal is a point on the screen

        Target(s):
        - Select which unit(s) for projectile to go to.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile to.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to send the projectile to.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

  Settings:

    Animation ID:
    - Determine which animation to use as a projectile.

    Duration:
    - Duration for the projectile(s) to travel.

    Wait For Projectile?:
    - Wait for projectile(s) to reach their destination before going onto
      the next command?

    Wait For Animation?:
    - Wait for animation to finish before going to the next command?

    Extra Settings:
    - Add extra settings to the projectile?

      Auto Angle?:
      - Automatically angle the projectile to tilt the direction
        it's moving?

      Angle Offset:
      - Alter the projectile's tilt by this many degrees.

      Arc Peak:
      - This is the height of the project's trajectory arc in pixels.

      Easing:
      - Select which easing type to apply to the projectile's trajectory.

      Spin Speed:
      - Determine how much angle the projectile spins per frame.
      - Does not work well with "Auto Angle".

---

PROJECTILE: Icon
- Create an icon projectile and fire it at a target.
- Requires VisuMZ_3_ActSeqProjectiles!

  Coordinates:

    Start Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should start from.
        - Target - Start from battler target(s)
        - Point - Start from a point on the screen

        Target(s):
        - Select which unit(s) to start the projectile from.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile from.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to start the projectile at.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

    Goal Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should go to.
        - Target - Goal is battler target(s)
        - Point - Goal is a point on the screen

        Target(s):
        - Select which unit(s) for projectile to go to.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile to.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to send the projectile to.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

  Settings:

    Icon:
    - Determine which icon to use as a projectile.
    - You may use JavaScript code.

    Duration:
    - Duration for the projectile(s) to travel.

    Wait For Projectile?:
    - Wait for projectile(s) to reach their destination before going onto
      the next command?

    Extra Settings:
    - Add extra settings to the projectile?

      Auto Angle?:
      - Automatically angle the projectile to tilt the direction
        it's moving?

      Angle Offset:
      - Alter the projectile's tilt by this many degrees.

      Arc Peak:
      - This is the height of the project's trajectory arc in pixels.

      Blend Mode:
      - What kind of blend mode do you wish to apply to the projectile?
        - Normal
        - Additive
        - Multiply
        - Screen

      Easing:
      - Select which easing type to apply to the projectile's trajectory.

      Hue:
      - Adjust the hue of the projectile.
      - Insert a number between 0 and 360.

      Scale:
      - Adjust the size scaling of the projectile.
      - Use decimals for exact control.

      Spin Speed:
      - Determine how much angle the projectile spins per frame.
      - Does not work well with "Auto Angle".

---

PROJECTILE: Picture
- Create a picture projectile and fire it at a target.
- Requires VisuMZ_3_ActSeqProjectiles!

  Coordinates:

    Start Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should start from.
        - Target - Start from battler target(s)
        - Point - Start from a point on the screen

        Target(s):
        - Select which unit(s) to start the projectile from.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile from.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to start the projectile at.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

    Goal Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should go to.
        - Target - Goal is battler target(s)
        - Point - Goal is a point on the screen

        Target(s):
        - Select which unit(s) for projectile to go to.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile to.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to send the projectile to.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

  Settings:

    Picture Filename:
    - Determine which picture to use as a projectile.

    Duration:
    - Duration for the projectile(s) to travel.

    Wait For Projectile?:
    - Wait for projectile(s) to reach their destination before going onto
      the next command?

    Extra Settings:
    - Add extra settings to the projectile?

      Auto Angle?:
      - Automatically angle the projectile to tilt the direction
        it's moving?

      Angle Offset:
      - Alter the projectile's tilt by this many degrees.

      Arc Peak:
      - This is the height of the project's trajectory arc in pixels.

      Blend Mode:
      - What kind of blend mode do you wish to apply to the projectile?
        - Normal
        - Additive
        - Multiply
        - Screen

      Easing:
      - Select which easing type to apply to the projectile's trajectory.

      Hue:
      - Adjust the hue of the projectile.
      - Insert a number between 0 and 360.

      Scale:
      - Adjust the size scaling of the projectile.
      - Use decimals for exact control.

      Spin Speed:
      - Determine how much angle the projectile spins per frame.
      - Does not work well with "Auto Angle".

---

Action Sequences - Skew (Camera)

These action sequences allow you to have control over the camera skew. Requires VisuMZ_3_ActSeqCamera!

---

SKEW: Change Skew
- Changes the camera skew.
- Requires VisuMZ_3_ActSeqCamera!

  Skew X:
  - Change the camera skew X to this value.

  Skew Y:
  - Change the camera skew Y to this value.

  Duration:
  - Duration in frames to change camera skew.

  Skew Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Skew?:
  - Wait for skew changes to complete before performing next command?

---

SKEW: Reset Skew
- Reset any skew settings.
- Requires VisuMZ_3_ActSeqCamera!

  Duration:
  - Duration in frames to reset camera skew.

  Skew Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Skew?:
  - Wait for skew changes to complete before performing next command?

---

SKEW: Wait For Skew
- Waits for skew changes to complete before performing next command.
- Requires VisuMZ_3_ActSeqCamera!

---

Action Sequences - Target

If using a manual target by target Action Sequence, these commands will give you full control over its usage.

Refer to the image above for reference on how this works.

---

TARGET: Current Index
- Sets the current index to this value.
- Then decide to jump to a label (optional).

  Set Index To:
  - Sets current targeting index to this value.
  - 0 is the starting index of a target group.

  Jump To Label:
  - If a target is found after the index change, jump to this label in the
    Common Event.

---

TARGET: Next Target
- Moves index forward by 1 to select a new current target.
- Then decide to jump to a label (optional).

  Jump To Label:
  - If a target is found after the index change, jump to this label in the
    Common Event.

---

TARGET: Previous Target
- Moves index backward by 1 to select a new current target.
- Then decide to jump to a label (optional).

  Jump To Label:
  - If a target is found after the index change, jump to this label in the
    Common Event.

---

TARGET: Random Target
- Sets index randomly to determine new currernt target.
- Then decide to jump to a label (optional).

  Force Random?:
  - Index cannot be its previous index amount after random.

  Jump To Label:
  - If a target is found after the index change, jump to this label in the
    Common Event.

---

Action Sequences - Voice

---

VOICE: Common Line
- Plays a common voice line from target battler(s).
- Requires VisuMZ_3_BattleVoices!

  Speaker Target(s):
  - Select unit(s) to play voice lines from.

  Voice Line:
  - What voice line do you wish to play?

---

VOICE: Play Special Line
- Plays a special voice line from target battler(s).
- Requires VisuMZ_3_BattleVoices!

  Speaker Target(s):
  - Select unit(s) to play voice lines from.

  Voice Line Type:
  - What voice line type do you wish to play?
    - Action Name
    - Chant Line
    - Item Name
    - Skill Name
    - Spell Name
    - Unique Lines

  Name / Letter:
  - What voice letter/name do you want to play?

---

Action Sequences - Weapon

Allows for finer control over Dual/Multi Wielding actors.

Only works for Actors.

---

WEAPON: Clear Weapon Slot
- Clears the active weapon slot (making others valid again).
- Only works for Actors.

  Targets:
  - Select unit(s) to clear the active weapon slot for.

---

WEAPON: Next Weapon Slot
- Goes to next active weapon slot (making others invalid).
- If next slot is weaponless, don't label jump.

  Targets:
  - Select unit(s) to change the next active weapon slot for.

---

WEAPON: Set Weapon Slot
- Sets the active weapon slot (making others invalid).
- Only works for Actors.

  Targets:
  - Select unit(s) to change the active weapon slot for.

  Weapon Slot ID:
  - Select weapon slot to make active (making others invalid).
  - Use 0 to clear and normalize. You may use JavaScript code.

---

Action Sequences - Zoom (Camera)

These Action Sequences are zoom-related. Requires VisuMZ_3_ActSeqCamera!

---

ZOOM: Change Scale
- Changes the zoom scale.
- Requires VisuMZ_3_ActSeqCamera!

  Scale:
  - The zoom scale to change to.

  Duration:
  - Duration in frames to reset battle zoom.

  Zoom Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Zoom?
  - Wait for zoom changes to complete before performing next command?

---

ZOOM: Reset Zoom
- Reset any zoom settings.
- Requires VisuMZ_3_ActSeqCamera!

  Duration:
  - Duration in frames to reset battle zoom.

  Zoom Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Zoom?
  - Wait for zoom changes to complete before performing next command?

---

ZOOM: Wait For Zoom
- Waits for zoom changes to complete before performing next command.
Requires VisuMZ_3_ActSeqCamera!

---

Elements and Status Menu Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

---

Actor: Change Biography (Group)
Actor: Change Biography (Range)
Actor: Change Biography (JS)
- Changes the biography of the selected actor(s).
- Each version has a different means of selecting Actor ID's.

  Step 1: Target ID
  - Select which Actor ID(s) to affect.

  Step 2: Biography
  - Change the biography for target actor(s) to this.
  - Text codes allowed.
  - %1 - Actor's name.

---

Actor: Change Trait Sets (Group)
Actor: Change Trait Sets (Range)
Actor: Change Trait Sets (JS)
- Changes the Trait Set(s) of the selected actor(s).
- Each version has a different means of selecting Actor ID's.

  Step 1: Target ID
  - Select which Actor ID(s) to affect.

  Step 2: Change Trait Set
  - Element
  - SubElement
  - Gender
  - Race
  - Nature
  - Alignment
  - Blessing
  - Curse
  - Zodiac
  - Variant
    - Change to the name of the Trait Set to switch actor(s) to.
    - "Unchanged" to leave alone.
    - "Random" to randomize.
      - Random will use the random pool dictated by the Plugin Parameters
        and the Trait Set weights determined there as well.

---

Enemy Plugin Commands

---

Enemy: Change Trait Sets (Group)
Enemy: Change Trait Sets (Range)
Enemy: Change Trait Sets (JS)
- Changes the Trait Set(s) of the selected enemy(ies).
- Each version has a different means of selecting Enemy Indexes.

  Step 1: Target ID
  - Select which Enemy Index(es) to affect.

  Step 2: Change Trait Set
  - Element
  - SubElement
  - Gender
  - Race
  - Nature
  - Alignment
  - Blessing
  - Curse
  - Zodiac
  - Variant
    - Change to the name of the Trait Set to switch target(s) to.
    - "Unchanged" to leave alone.
    - "Random" to randomize.
      - Random will use the random pool dictated by the Plugin Parameters
        and the Trait Set weights determined there as well.

---

Events and Movement Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Auto Movement Plugin Commands

---

Auto Movement: Events
- Allow/stop events from auto movement.

  Value:
  - Allow events to move automatically?

---

Call Event Plugin Commands

---


Call Event: Remote Read
- Runs the page of a different event remotely.
- This will run the page of the target event on the CURRENT event.
- This means that any "This Event" commands will be applied to the event
  using this Plugin Command and NOT the target event that page data is being
  retrieved from.
- Think of it as the current event using the target called event as a
  Common Event ala how RPG Maker 2003 works (for those familiar with it).

  Map ID:
  - Target event's map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the event to remotely run.
  - Use 0 for current event.
  - You may use JavaScript code.

  Page ID:
  - The page of the remote event to run.
  - You may use JavaScript code.

---

Dash Plugin Commands

---

Dash Enable: Toggle
- Enable/Disable Dashing on maps.

  Value:
  - What do you wish to change dashing to?

---

Event Icon Plugin Commands

---

Event Icon: Change
- Change the icon that appears on an event.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Icon Index:
  - Icon index used for the icon.
  - You may use JavaScript code.

  Buffer X:
  - How much to shift the X position by?
  - You may use JavaScript code.

  Buffer Y:
  - How much to shift the Y position by?
  - You may use JavaScript code.

  Blend Mode:
  - What kind of blend mode do you wish to apply to the icon sprite?

---

Event Icon: Delete
- Delete the icon that appears on an event.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

---

Event Label Plugin Commands

---

Event Label: Refresh
- Refresh all Event Labels on screen.
- This is used to refresh page conditions for map changes that don't
  force a refresh.

---

Event Label: Visible
- Change the visibility of Event Labels.

  Visibility:
  - What do you wish to change visibility to?

---

Event Location Plugin Commands

---

Event Location: Save
- Memorize an event's map location so it reappears there the next time the
  map is loaded.

  Event ID:
  - The ID of the target event.
  - You may use JavaScript code.

---

Event Location: Delete
- Deletes an event's saved map location.
- The event will reappear at its default location.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

---

Event Location: Create
- Creates a custom spawn location for a specific map's event so it appears
  there the next time the map is loaded.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  X Coordinate:
  - The X coordinate of the event.
  - You may use JavaScript code.

  Y Coordinate:
  - The Y coordinate of the event.
  - You may use JavaScript code.

  Direction:
  - The direction the event will be facing.

  Optional:

    Page ID:
    - The page of the event to set the move route to.
    - You may use JavaScript code.

    Move Route Index:
    - The point in the move route for this event to be at if the page ID
      matches the rest of the page conditions.

---

Event Timer Plugin Commands

---

Event Timer: Change Speed
- Changes the timer frame decrease (or increase) speed.

  Speed:
  - How many 1/60ths of a second does each frame increase or decrease by?
  - Negative decreases.
  - Positive increases.
  - JavaScript allowed.

---

Event Timer: Expire Event Assign
- Sets a Common Event to run upon expiration.
- Bypasses the default code if one is set.

  Common Event ID:
  - Select the Common Event to run upon the timer's expiration.

---

Event Timer: Expire Event Clear
- Clears any set to expire Common Event and instead, run the default
  Game_Timer expiration code.

---

Event Timer: Frames Gain
- Chooses how many frames, seconds, minutes, or hours are gained or lost for
  the event timer.

  Frames:
  - How many 1/60ths of a second are gained/lost?
  - Positive for gain.
  - Negative for lost.
  - JavaScript allowed.

  Seconds:
  - How many seconds are gained/lost?
  - Positive for gain.
  - Negative for lost.
  - JavaScript allowed.

  Minutes:
  - How many minutes are gained/lost?
  - Positive for gain.
  - Negative for lost.
  - JavaScript allowed.

  Hours:
  - How many hours are gained/lost?
  - Positive for gain.
  - Negative for lost.
  - JavaScript allowed.

---

Event Timer: Frames Set
- Chooses how many frames, seconds, minutes, or hours are set for the event
  timer.

  Frames:
  - Set frame count to this value.
  - Each frame is 1/60th of a second.
  - JavaScript allowed.

  Seconds:
  - Set seconds to this value.
  - JavaScript allowed.

  Minutes:
  - Set minutes to this value.
  - Each minute is 60 seconds.
  - JavaScript allowed.

  Hours:
  - Set hours to this value.
  - Each hour is 60 minutes.
  - JavaScript allowed.

---

Event Timer: Pause
- Pauses the current event timer, but does not stop it.

---

Event Timer: Resume
- Resumes the current event timer from the paused state.

---

Follower Control Plugin Commands

---

Follower: Set Global Chase
- Disables all followers from chasing the player or reenables it.

  Chase:
  - Sets all followers to chase the player or not.

---

Follower: Set Target Chase
- Disables target follower from chasing the player or reenables it.

  Follower ID:
  - Select which follower ID to disable/reenable chasing for.

  Chase:
  - Sets target follower to chase its target or not.

---

Follower: Set Control
- Sets the event commands to target a follower when "Player" is selected as
  the target.

  Follower ID:
  - Select which follower ID to control.
  - 0 is the player.

---

Follower: Reset
- Resets all follower controls. Event Commands that target the "Player"
  return to normal and followers chase again.

---

Global Switch Plugin Commands

---

Global Switch: Get Self Switch A B C D
- Gets the current ON/OFF value from a Self Switch and stores it onto a
  Global Switch.

  Map ID:
  - The map the source map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the source event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Letter:
  - Letter of the target event's Self Switch to obtain data from.

  -

  Target Switch ID:
  - The ID of the target switch.

---

Global Switch: Get Self Switch ID
- Gets the current ON/OFF value from a Self Switch and stores it onto a
  Global Switch.

  Map ID:
  - The map the source map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the source event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Switch ID:
  - The ID of the source switch.

  -

  Target Switch ID:
  - The ID of the target switch.

---

Global Variable Plugin Commands

---

Global Variable: Get Self Variable ID
- Gets the current stored value from a Self Variable and stores it onto a
  Global Variable.

  Map ID:
  - The map the source map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the source event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Variable ID:
  - The ID of the source variable.

  -

  Target Variable ID:
  - The ID of the target variable.

---

Morph Event Plugin Commands

---

Morph Event: Change
- Runs the page of a different event remotely.

  Step 1:

    Map ID:
    - Target event's map. Use 0 for current map.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event.
    - Use 0 for current event.
    - You may use JavaScript code.

  Step 2:

    Template Name:
    - Name of the target event template to morph into.
    - Ignored if this is called "Untitled".

    Map ID:
    - Target event's map. Use 0 for current map.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event.
    - Use 0 for current event.
    - You may use JavaScript code.

    Preserve Morph:
    - Is the morph effect preserved?
    - Or does it expire upon leaving the map?

---

Morph Event: Remove
- Remove the morph status of an event.

  Map ID:
  - Target event's map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the event to remotely run.
  - Use 0 for current event.
  - You may use JavaScript code.

  Remove Preservation:
  - Also remove the preservation effect?

---

Player Icon Plugin Commands

---

Player Icon: Change
- Change the icon that appears on on the player.

  Icon Index:
  - Icon index used for the icon.
  - You may use JavaScript code.

  Buffer X:
  - How much to shift the X position by?
  - You may use JavaScript code.

  Buffer Y:
  - How much to shift the Y position by?
  - You may use JavaScript code.

  Blend Mode:
  - What kind of blend mode do you wish to apply to the icon sprite?

---

Player Icon: Delete
- Delete the icon that appears on the player.

---

Self Data Plugin Commands

---

Self Data: Reset All
- Reset the Self Switch and Self Variable data of all events within the
  specified map.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

---

Self Switch Plugin Commands

---

Self Switch: A B C D
- Change the Self Switch of a different event.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Letter:
  - Letter of the target event's Self Switch to change.

  Value:
  - What value do you want to set the Self Switch to?

---

Self Switch: Switch ID
- Change the Self Switch of a different event.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Switch ID:
  - The ID of the target switch.

  Value:
  - What value do you want to set the Self Switch to?

---

Self Variable Plugin Commands

---

Self Variable: Variable ID
- Change the Self Variable of a different event.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Variable ID:
  - The ID of the target variable.

  Value:
  - What value do you want to set the Self Switch to?

---

Spawn Event Plugin Commands

---

Spawn Event: Spawn At X, Y
- Spawns desired event at X, Y location on the current map.

  Step 1:

    Template Name:
    - Name of the target event template to spawn as.
    - Ignored if this is called "Untitled".

    Map ID:
    - Target event's map to be used as reference.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event to be used as reference.
    - You may use JavaScript code.

  Step 2:

    X Coordinate:
    - Target Location to spawn at.
    - You may use JavaScript code.

    Y Coordinate:
    - Target Location to spawn at.
    - You may use JavaScript code.

    Check Event Collision:
    - Check collision with any other events and player?

    Check Passability:
    - Check passability of the target location.

    Preserve Spawn:
    - Is the spawned event preserved?
    - Or does it expire upon leaving the map?

  Step 3:

    Success Switch ID:
    - Target switch ID to record spawning success.
    - Ignore if ID is 0. OFF means failed. ON means success.

---

Spawn Event: Spawn At Region
- Spawns desired event at a random region-marked location on the
  current map.

  Step 1:

    Template Name:
    - Name of the target event template to spawn as.
    - Ignored if this is called "Untitled".

    Map ID:
    - Target event's map to be used as reference.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event to be used as reference.
    - You may use JavaScript code.

  Step 2:

    Region ID(s):
    - Pick region(s) to spawn this event at.

    Check Event Collision:
    - Check collision with any other events and player?

    Check Passability:
    - Check passability of the target location.

    Preserve Spawn:
    - Is the spawned event preserved?
    - Or does it expire upon leaving the map?

  Step 3:

    Success Switch ID:
    - Target switch ID to record spawning success.
    - Ignore if ID is 0. OFF means failed. ON means success.

---

Spawn Event: Spawn At Terrain Tag
- Spawns desired event at a random terrain tag-marked location on the
  current map.

  Step 1:

    Template Name:
    - Name of the target event template to spawn as.
    - Ignored if this is called "Untitled".

    Map ID:
    - Target event's map to be used as reference.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event to be used as reference.
    - You may use JavaScript code.

  Step 2:

    Terrain Tag(s):
    - Pick terrain tag(s) to spawn this event at.
    - Insert numbers between 0 and 7.

    Check Event Collision:
    - Check collision with any other events and player?

    Check Passability:
    - Check passability of the target location.

    Preserve Spawn:
    - Is the spawned event preserved?
    - Or does it expire upon leaving the map?

  Step 3:

    Success Switch ID:
    - Target switch ID to record spawning success.
    - Ignore if ID is 0. OFF means failed. ON means success.

---

Spawn Event: Despawn Event ID
- Despawns the selected Event ID on the current map.

  Event ID
  - The ID of the target event.
  - You may use JavaScript code.

---

Spawn Event: Despawn At X, Y
- Despawns any spawned event(s) at X, Y location on the current map.

  X Coordinate:
  - Target Location to despawn at.
  - You may use JavaScript code.

  Y Coordinate:
  - Target Location to despawn at.
  - You may use JavaScript code.

---

Spawn Event: Despawn Region(s)
- Despawns the selected Region(s).

  Region ID(s)
  - Pick region(s) and despawn everything inside it.

---

Spawn Event: Despawn Terrain Tag(s)
- Despawns the selected Terrain Tags(s) on the current map.

  Terrain Tag(s):
  - Pick terrain tag(s) and despawn everything inside it.
  - Insert numbers between 0 and 7.

---

Spawn Event: Despawn Everything
- Despawns all spawned events on the current map.

---

Items and Equips Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

--

Actor: Change Equip Slots
- Forcefully change the actor(s) equip slots.
- These will persist through class changes.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Equip Slots:
  - Insert the equip slots you want the actor(s) to have.
  - These entries are case-sensitive.

--

Actor: Reset Equip Slots
- Reset any forced equip slots for the actor(s).
- Equip slots will then be based on class.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

---

Purify Plugin Commands

---

Purify: Target Actor(s)
- Purifies target actor(s) of any cursed weapons or armors.
- Cannot be used in battle.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

---

Purify: Whole Party
- Purifies whole party of any cursed weapons or armors.
- Cannot be used in battle.

---

Shop Plugin Commands

---

Shop: Advanced
- Make it easier to put together inventories for a shop.
- WARNING: Does not allow for event-specific prices.

  Step 1: Item ID's
  - Select which Item ID ranges to add.

  Step 2: Weapon ID's
  - Select which Weapon ID ranges to add.

  Step 3: Armor ID's
  - Select which Armor ID ranges to add.

  Step 4: Purchase Only?
  - Make the shop purchase-only?

  Optional:

    Blacklist
    - A list of categories to blacklist from the shop.
    - Not used if empty. Mark categories with <Category: x>

    Whitelist
    - A list of categories to whitelist for the shop.
    - Not used if empty. Mark categories with <Category: x>

This Plugin Command primarily functions as an alternative to the editor's
"Shop Processing" event command as that one requires you to add items one at
a time, making it extremely tedious to add large amounts of items. This
Plugin Command will mitigate that by allowing ID ranges to determine which
items to make available.

---

Main Menu Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

---

Actor: Change Menu Image (Group)
Actor: Change Menu Image (Range)
Actor: Change Menu Image (JS)
- Changes the actor's Menu Image.
- Each version has a different means of selecting Actor ID's.

  Actor ID:
  - Select which ID(s) to affect.

  Filename:
  - Selected actor(s) will have their menu images changed to this.

---

Menu Command Plugin Commands

---

Menu Command: Clear Forced Settings
- Clear any forced settings for the menu command symbols.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Menu Command: Force Disable
- Forcefully disable specific menu commands via their symbols.
- Matching forced enabled symbols will be overwritten.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Menu Command: Force Enable
- Forcefully enable specific menu commands via their symbols.
- Matching forced disabled symbols will be overwritten.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Menu Command: Force Hide
- Forcefully hide specific menu commands via their symbols.
- Matching forced shown symbols will be overwritten.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Menu Command: Force Show
- Forcefully show specific menu commands via their symbols.
- Matching forced hidden symbols will be overwritten.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Message Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Message Plugin Commands

---

Message: Properties
  Change the various properties of the Message Window.

  Rows:
  - Change the number of Message Window rows.
  - Leave at 0 to keep it unchanged.

  Width:
  - Change the Message Window width in pixels.
  - Leave at 0 to keep it unchanged.

  Word Wrap:
  - Enable or disable Word Wrap for the Message Window?

---

Message: X/Y Offsets
- Change the X and Y Offsets of the Message Window.
- The offset value(s) will be saved and stored.

  Offset X:
  - Offset Message Window horizontally.
  - Negative: Left; Positive: Right
  - Message Window coordinates are still restricted via clamping.

  Offset Y:
  - Offset Message Window vertically.
  - Negative: Up; Positive: Down
  - Message Window coordinates are still restricted via clamping.

---

Choice Plugin Commands

---

Choice: Properties
  Change the properties found in the Show Choices event command.

  Line Height:
  - Change the line height for the show choices.
  - Leave at 0 to keep this unchanged.

  Max Rows:
  - Maximum number of choice rows to be displayed.
  - Leave at 0 to keep this unchanged.

  Max Columns:
  - Maximum number of choice columns to be displayed.
  - Leave at 0 to keep this unchanged.

  Text Alignment:
  - Text alignment for Show Choice window.

---

Picture Plugin Commands

---

Picture: Change Text
- Change text for target picture(s) to show.
- You may use text codes.
- Text will adapt to picture's properties.
- Settings will be erased if picture is erased.

  Picture ID(s):
  - The ID(s) of the picture(s) to set text to.

  Padding:
  - How much padding from the sides should there be?

  Text:

    Upper Left:
    Upper Center:
    Upper Right:
    Middle Left:
    Middle Center:
    Middle Right:
    Lower Left:
    Lower Center:
    Lower Right:
    - The text that's aligned to this picture's side.
    - You may use text codes.

---

Picture: Erase Text
- Erase all text for target picture(s).

  Picture ID(s):
  - The ID(s) of the picture(s) to erase text for.

---

Picture: Refresh Text
- Refreshes the text used for all on-screen pictures.
- To be used if any dynamic text codes are updated like \n[x].

---

Select Plugin Commands

---

Select: Weapon
- Opens the Event Select Item Window to let the player pick a weapon to
  choose from.
- Can be opened while the Message Window is open.

  Variable ID:
  - This variable will be used to record the ID of the selected weapon.
  - It will result in 0 otherwise.

  Weapon Type ID:
  - Reduce all the weapons to a specific weapon type.
  - Leave at 0 to not use filters.

---

Select: Armor
- Opens the Event Select Item Window to let the player pick an armor to
  choose from.
- Can be opened while the Message Window is open.

  Variable ID:
  - This variable will be used to record the ID of the selected armor.
  - It will result in 0 otherwise.

  Armor Type ID:
  - Reduce all the armors to a specific armor type.
  - Leave at 0 to not use filters.

  Equip Type ID:
  - Reduce all the armors to a specific equip type.
  - Leave at 0 to not use filters.

---

Select: Skill
- Opens the Event Select Item Window to let the player pick a skill to
  choose from.
- Requires VisuMZ_1_SkillsStatesCore!
- Can be opened while the Message Window is open.
- Skills will not be listed if they are hidden by the actor.
- Skills will not be listed if the actor lacks access to their Skill Type.

  Variable ID:
  - This variable will be used to record the ID of the selected skill.
  - It will result in 0 otherwise.

  Actor ID:
  - Select an actor to get the skill list from.
  - Use 0 to select from the party leader.

  Skill Type ID:
  - Reduce all the skills to a specific skill type.
  - Leave at 0 to not use filters.

---

Save Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Autosave Plugin Commands

---

Autosave: Enable/Disable
- Enable or Disable Autosave
- Requires Database => System 1 => [x] Enable Autosave

  Enable or Disable?:
  - Enable or disable autosave?

---

Autosave: (Stage 1) Request
- Autosaves the game at current point if enabled.
- Requires Database => System 1 => [x] Enable Autosave
- Autosave does not go through if it is neither enabled in the database or
  in-game through the "Autosave: Enable/Disable" plugin command.
- This Plugin Command will not autosave if the player turned off "Autosave"
  in the Options Menu.

---

Autosave: (Stage 2) Execute
- Executes autosaves the game at the current point.
- Requires Database => System 1 => [x] Enable Autosave
- This will require autosave to be enabled through the database, but it will
  ignore the "Autosave: Enable/Disable" plugin command state.
- This Plugin Command will not autosave if the player turned off "Autosave"
  in the Options Menu.

---

Autosave: (Stage 3) Force
- Forces autosaves the game at the current point.
- Requires Database => System 1 => [x] Enable Autosave
- This will require autosave to be enabled through the database, but it will
  ignore the "Autosave: Enable/Disable" plugin command state.

---

Save Plugin Commands

---

Save: Current Slot
- Process the game's current save at the current point.
- Must be outside of battle and on the map.

---

Save: Set Description
- Set the description text that will appear in the save files.

  Text:
  - Insert desired save description text here.
  - Text codes supported.
  - \V[x], \N[x], \P[x] are save local.
  - Other text codes will draw data from the currently active game.

---

Save: Set Picture
- Set the picture that would appear in the save file.

  Filename:
  - Input the filename here of the desired picture.

Category:Plugin Commands (MZ)

Contents

Animation Commands

Audio Plugin Commands

Debug Plugin Commands

Export Plugin Commands

Game Plugin Commands

Gold Plugin Commands

Map Plugin Commands

Picture Plugin Commands

Screen Shake Plugin Commands

Switch Plugin Commands

System Plugin Commands

Text Popup Command

Variable Plugin Commands

Action Sequence - Action Sets

Action Sequences - Angle (Camera)

Action Sequences - Animations

Action Sequences - Battle Log

Action Sequences - Camera

Action Sequences - Dragonbones

Action Sequences - Elements

Action Sequences - Horror Effects

Action Sequences - Impact

Action Sequences - Inject

Action Sequences - Mechanics

Action Sequences - Motion

Action Sequences - Movement

Action Sequences - Projectiles

Action Sequences - Skew (Camera)

Action Sequences - Target

Action Sequences - Voice

Action Sequences - Weapon

Action Sequences - Zoom (Camera)

Actor Plugin Commands

Enemy Plugin Commands

Auto Movement Plugin Commands

Call Event Plugin Commands

Dash Plugin Commands

Event Icon Plugin Commands

Event Label Plugin Commands

Event Location Plugin Commands

Event Timer Plugin Commands

Follower Control Plugin Commands

Global Switch Plugin Commands

Global Variable Plugin Commands

Morph Event Plugin Commands

Player Icon Plugin Commands

Self Data Plugin Commands

Self Switch Plugin Commands

Self Variable Plugin Commands

Spawn Event Plugin Commands

Actor Plugin Commands

Purify Plugin Commands

Shop Plugin Commands

Actor Plugin Commands

Menu Command Plugin Commands

Message Plugin Commands

Choice Plugin Commands

Picture Plugin Commands

Select Plugin Commands

Autosave Plugin Commands

Save Plugin Commands

End of List

Pages in category "Plugin Commands (MZ)"

A

B

C

D

E

F

G

H

I

L

M

N

O

P

Q