Category:Plugin Commands (MZ)

From Yanfly.moe Wiki
Revision as of 20:37, 19 August 2020 by Olivia (talk | contribs)
Jump to navigation Jump to search

Welcome to the wiki! This is where you can find resources from Yanfly.moe, Ækashics.moe,
VisuStella, Caz Wolf, Fallen Angel Olivia, Atelier Irina, and other affiliated content creators.


Contents

Plugin Commands are event commands that are used to call upon functions added by a plugin that aren't inherently a part of RPG Maker MZ.

Here is a list of Plugin Command(s) that you may use:

---

Core Engine VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Animation Commands

CoreEngine PointAni.gif

CoreEngine Update53 Command1.png

Animation: Play at Coordinate
- Plays an animation on the screen at a specific x, y coordinate even if
  there is no sprite attached.

  Animation ID:
  - Plays this animation.

  Coordinates:

    X:
    Y:
    - X/Y coordinate used for the animation.
      You may use JavaScript code.

  Mirror Animation?:
  - Mirror the animation?

  Mute Animation?:
  - Mute the animation?

---

Audio Plugin Commands

---

CoreEngine Update103 Command1.png

Audio: Change Current BGM Volume
- Changes the current BGM volume without changing any of the current BGM's
  other properties and without restarting the BGM.

  Volume:
  - Change the current BGM's volume to what amount?
  - You may use JavaScript code.
  - Use numbers from 0 to 100.

---

CoreEngine Update103 Command2.png

Audio: Change Current BGM Pitch
- Changes the current BGM pitch without changing any of the current BGM's
  other properties and without restarting the BGM.

  Pitch:
  - Change the current BGM's pitch to what amount?
  - You may use JavaScript code.
  - Use numbers from 50 to 150.

---

CoreEngine Update103 Command3.png

Audio: Change Current BGM Pan
- Changes the current BGM pan without changing any of the current BGM's
  other properties and without restarting the BGM.

  Pan:
  - Change the current BGM's pan to what amount?
  - You may use JavaScript code.
  - Use numbers from -100 to 100.

---

CoreEngine Update103 Command4.png

Audio: Change Current BGM Volume
- Changes the current BGM volume without changing any of the current BGM's
  other properties and without restarting the BGM.

  Volume:
  - Change the current BGM's volume to what amount?
  - You may use JavaScript code.
  - Use numbers from 0 to 100.

---

CoreEngine Update103 Command5.png

Audio: Change Current BGM Pitch
- Changes the current BGM pitch without changing any of the current BGM's
  other properties and without restarting the BGM.

  Pitch:
  - Change the current BGM's pitch to what amount?
  - You may use JavaScript code.
  - Use numbers from 50 to 150.

---

CoreEngine Update103 Command6.png

Audio: Change Current BGM Pan
- Changes the current BGM pan without changing any of the current BGM's
  other properties and without restarting the BGM.

  Pan:
  - Change the current BGM's pan to what amount?
  - You may use JavaScript code.
  - Use numbers from -100 to 100.

---

Debug Plugin Commands

---

CoreEngine Update95 Command1.png

Debug: Current Controller ID
- PLAY TEST ONLY.
- Shows current controller ID in debug console.
- If you press a key on the keyboard, this data will be erased.
- Also copies to computer clipboard if possible.

---


Export Plugin Commands

CoreEngine Update39 Command1.png

---

Export: All Maps Text
- PLAY TEST ONLY. Exports all of the text from all maps,
  their events, event pages, and any associated Common Events.

  - Exports 'Show Text' event commands.
  - Exports 'Show Choices' event commands.
  - Exports 'Show Scrolling Text' event commands.
  - Exports 'Comments' event commands.
  - Only the raw text will be exported.
  - Only usable during Play Test.

---

Export: All Troops Text
- PLAY TEST ONLY. Exports all of the text from all troops,
  their event pages, and any associated Common Events.

  - Exports 'Show Text' event commands.
  - Exports 'Show Choices' event commands.
  - Exports 'Show Scrolling Text' event commands.
  - Exports 'Comments' event commands.
  - Only the raw text will be exported.
  - Only usable during Play Test.

---

Export: Current Map Text
- PLAY TEST ONLY. Exports all of the text on the current map,
  its events, the event pages, and any associated Common Events.

  - Exports 'Show Text' event commands.
  - Exports 'Show Choices' event commands.
  - Exports 'Show Scrolling Text' event commands.
  - Exports 'Comments' event commands.
  - Only the raw text will be exported.
  - Only usable during Play Test.
  - If not in battle, this Plugin Command will not work.

---

Export: Current Troop Text
- PLAY TEST ONLY. Exports all of the text on the current troop,
  the troop's event pages, and any associated Common Events.

  - Exports 'Show Text' event commands.
  - Exports 'Show Choices' event commands.
  - Exports 'Show Scrolling Text' event commands.
  - Exports 'Comments' event commands.
  - Only the raw text will be exported.
  - Only usable during Play Test.
  - If not in battle, this Plugin Command will not work.

---

Game Plugin Commands

---

CoreEnginePluginCommand01.png

Game: Open URL
- Opens a website URL from the game.

  URL:
  - Where do you want to take the player?

---

Gold Plugin Commands

---

CoreEnginePluginCommand02.png

Gold: Gain/Lose
- Allows you to give/take more gold than the event editor limit.

  Value:
  - How much gold should the player gain/lose?
  - Use negative values to remove gold.

---

Map Plugin Commands

---

Map: Once Parallel
- Plays a Common Event parallel to the event once without repeating itself
  when done.
- Map only!

  Common Event ID:
  - The ID of the parallel Common Event to play.
  - Does NOT repeat itself when finished.
  - When exiting map scene or changing maps, all Once Parallels are cleared.
  - Once Parallels are not retained upon reentering the scene or map.
  - Once Parallels are not stored in memory and cannot be saved.

---

Picture Plugin Commands

---

CoreEngine PictureCoordinates2.gif

Picture: Coordinates Mode
- Play Test Mode only! Gets the coordinates of a specific picture as you
  move it across the screen.

  Picture ID:
  - The ID of the pictures to track the coordinates of.

---

CoreEnginePluginCommand03.png

CoreEnginePluginCommand03a.png

Picture: Easing Type
- Changes the easing type to a number of options.

  Picture ID:
  - Which picture do you wish to apply this easing to?

  Easing Type:
  - Select which easing type you wish to apply.

  Instructions:
  - Insert this Plugin Command after a "Move Picture" event command.
  - Turn off "Wait for Completion" in the "Move Picture" event.
  - You may have to add in your own "Wait" event command after.

---

CoreEngine Update43 Command2.png

Picture: Erase All
- Erases all pictures on the screen because it's extremely tedious to do it
  one by one.

---

CoreEngine Update43 Command3.png

Picture: Erase Range
- Erases all pictures within a range of numbers because it's extremely
  tedious to do it one by one.

  Starting ID:
  - The starting ID of the pictures to erase.

  Ending ID:
  - The ending ID of the pictures to erase.

---

CoreEngine Update43 Command1.png

CoreEngine Update43 Command1 Ani2.gif

Picture: Show Icon
- Shows an icon instead of a picture image.
- The picture icon can be controlled like any other picture.

  General:

    Picture ID Number:
    - What is the ID of the picture you wish to show at?
    - Use a number between 1 and 100.
    - You may use JavaScript code.

    Icon Index:
    - Select the icon index to use for this picture.
    - You may use JavaScript code.

    Smooth Icon?:
    - This will make the icon smoothed out or pixelated.

  Picture Settings:

    Position:

      Origin:
      - What is the origin of this picture icon?
        - Upper Left
        - Center

      Position X:
      - X coordinate of the picture.
      - You may use JavaScript code.

      Position Y:
      - Y coordinate of the picture.
      - You may use JavaScript code.

    Scale:

      Width %:
      - Horizontal scale of the picture.
      - You may use JavaScript code.
      - 100 is 100%

      Height %:
      - Vertical scale of the picture.
      - You may use JavaScript code.
      - 100 is 100%

    Blend:

      Opacity:
      - Insert a number to determine opacity level.
      - Use a number between 0 and 255.
      - You may use JavaScript code.

      Blend Mode:
      - What kind of blend mode do you wish to apply to the picture?

---

Screen Shake Plugin Commands

---

CoreEngineCommandScreenShake.png

Screen Shake: Custom:
- Creates a custom screen shake effect and also sets the following uses of
  screen shake to this style.

  Shake Style:
  - Select shake style type.
  - Original
  - Random
  - Horizontal
  - Vertical

  Power:
  - Power level for screen shake.

  Speed:
  - Speed level for screen shake.

  Duration:
  - Duration of screenshake.
  - You can use code as well.

  Wait for Completion:
  - Wait until completion before moving onto the next event?

---

Switch Plugin Commands

---

Switches: Randomize ID(s)
- Select specific Switch ID's to randomize ON/OFF.

  Switch ID(s):
  - Select which Switch ID(s) to toggle.

  Chance for ON:
  - Chance out of 100 that determines the switches to be ON.

---

Switches: Randomize Range
- Select specific Switch ID Range to randomize ON/OFF.
- The ratio determines the ON/OFF distribution.

  Starting ID:
  - The starting ID of the Switch to toggle.

  Ending ID:
  - The ending ID of the Switch to toggle.

  Chance for ON:
  - Chance out of 100 that determines the switches to be ON.

---

Switches: Toggle ID(s)
- Select specific Switch ID's to toggle ON/OFF.
- ON becomes OFF. OFF becomes ON.

  Switch ID(s):
  - Select which Switch ID(s) to toggle.

---

Switches: Toggle Range
- Select specific Switch ID Range to toggle ON/OFF.
- ON becomes OFF. OFF becomes ON.

  Starting ID:
  - The starting ID of the Switch to toggle.

  Ending ID:
  - The ending ID of the Switch to toggle.

---

System Plugin Commands

---

CoreEngine Update5 Command1.png

System: Battle System Change
- Switch to a different battle system in-game.

  Change To:
  - Choose which battle system to switch to.
    - Database Default (Use game database setting)
    - -
    - DTB: Default Turn Battle
    - TPB Active: Time Progress Battle (Active)
    - TPB Wait: Time Progress Battle (Wait)
    - -
    - BTB: Brave Turn Battle (Req VisuMZ_2_BattleSystemBTB)
    - CTB: Charge Turn Battle (Req VisuMZ_2_BattleSystemCTB)
    - OTB: Order Turn Battle (Req VisuMZ_2_BattleSystemOTB)
    - STB: Standard Turn Battle (Req VisuMZ_2_BattleSystemSTB)

---

CoreEngine Update14 Command1.png

System: Load Images
- Allows you to (pre) load up images ahead of time.

  img/animations/:
  img/battlebacks1/:
  img/battlebacks2/:
  img/enemies/:
  img/faces/:
  img/parallaxes/:
  img/pictures/:
  img/sv_actors/:
  img/sv_enemies/:
  img/system/:
  img/tilesets/:
  img/titles1/:
  img/titles2/:
  - Which files do you wish to load from this directory?

---

CoreEnginePluginCommand04.png

System: Main Font Size
- Set the game's main font size.

  Change To:
  - Change the font size to this number.

---

CoreEnginePluginCommand05.png

System: Side View Battle
- Switch between Front View or Side View for battle.

  Change To:
  - Choose which view type to switch to.

---

CoreEnginePluginCommand07.png

System: Window Padding
- Change the game's window padding amount.

  Change To:
  - Change the game's standard window padding to this value.

---


Variable Plugin Commands

---

CoreEngine Update89 Command1.png

Variable: JS Eval
- Pick a variable ID and value to alter through JS.
- Allows one line of code for variable ID and operand.
- Functions like RM2k3's Variable Pointers.

  Variable ID:
  - This is the target variable to alter.
  - You may use JavaScript.
  - ie: $gameVariables.value(1)

  Operation Type:
  - What operation do you wish to use for this Plugin Command?

  Operand Modifier:
  - Value to be used in calculating the target variable.
  - You may use JavaScript.
  - ie: $gameVariables.value(1)

---

CoreEngine Update89 Command2.png

Variable: JS Block
- Pick a variable ID and value to alter through JS.
- Allows JS block code for variable ID and operand.
- Functions like RM2k3's Variable Pointers.

  Variable ID:
  - This is the target variable to alter.
  - You may use JavaScript.
  - ie: $gameVariables.value(1)

  Operation Type:
  - What operation do you wish to use for this Plugin Command?

  Operand Modifier:
  - Value to be used in calculating the target variable.
  - You may use JavaScript.
  - ie: $gameVariables.value(1)

---

Battle Core VisuStella MZ

BattleCoreActSeq.png

Skills and items, when used in battle, have a pre-determined series of actions to display to the player as a means of representing what's going on with the action. For some game devs, this may not be enough and they would like to get more involved with the actions themselves.

Action Sequences, added through this plugin, enable this. To give a skill or item a Custom Action Sequence, a couple of steps must be followed:

---

BattleCorePentaSlash.gif

1. Insert the <Custom Action Sequence> notetag into the skill or item's notebox (or else this would not work as intended). 2. Give that skill/item a Common Event through the Effects box. The selected Common Event will contain all the Action Sequence data. 3. Create the Common Event with Action Sequence Plugin Commands and/or event commands to make the skill/item do what you want it to do.

---

The Plugin Commands added through the Battle Core plugin focus entirely on Action Sequences. However, despite the fact that they're made for skills and items, some of these Action Sequence Plugin Commands can still be used for regular Troop events and Common Events.

---

Action Sequence - Action Sets

BattleCoreActSeqSet.gif

Action Sequence Action Sets are groups of commonly used Action Sequence Commands put together for more efficient usage.

---

ACSET: Setup Action Set
- The generic start to most actions.

  Display Action:
  Immortal: On:
  Battle Step:
  Wait For Movement:
  Cast Animation:
  Wait For Animation:
  - Use this part of the action sequence?

---

ACSET: All Targets Action Set
- Affects all targets simultaneously performing the following.

  Dual/Multi Wield?
  - Add times struck based on weapon quantity equipped?

  Perform Action:
  Wait Count:
  Action Animation:
  Wait For Animation:
  Action Effect:
  Immortal: Off:
  - Use this part of the action sequence?
  - Insert values for the Wait Count(s).

---

ACSET: Each Target Action Set
- Goes through each target one by one to perform the following.

  Dual/Multi Wield?
  - Add times struck based on weapon quantity equipped?

  Perform Action:
  Wait Count:
  Action Animation:
  Wait Count:
  Action Effect:
  Immortal: Off:
  - Use this part of the action sequence?
  - Insert values for the Wait Count(s).

---

ACSET: Finish Action
- The generic ending to most actions.

  Immortal: Off:
  Wait For New Line:
  Wait For Effects:
  Clear Battle Log:
  Home Reset:
  Wait For Movement:
  - Use this part of the action sequence?

---

Action Sequences - Angle (Camera)

VisuMZ ActSeqCamera Angle.gif

These action sequences allow you to have control over the camera angle. Requires VisuMZ_3_ActSeqCamera!

---

ANGLE: Change Angle
- Changes the camera angle.
- Requires VisuMZ_3_ActSeqCamera!

  Angle:
  - Change the camera angle to this many degrees.

  Duration:
  - Duration in frames to change camera angle.

  Angle Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Angle?:
  - Wait for angle changes to complete before performing next command?

---

ANGLE: Reset Angle
- Reset any angle settings.
- Requires VisuMZ_3_ActSeqCamera!

  Duration:
  - Duration in frames to reset camera angle.

  Angle Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Angle?:
  - Wait for angle changes to complete before performing next command?

---

ANGLE: Wait For Angle
- Waits for angle changes to complete before performing next command.
- Requires VisuMZ_3_ActSeqCamera!

---

Action Sequences - Animations

BattleCoreCastAni.gif

These Action Sequences are related to the 'Animations' that can be found in the Animations tab of the Database.

---

ANIM: Action Animation
- Plays the animation associated with the action.

  Targets:
  - Select unit(s) to play the animation on.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Attack Animation
- Plays the animation associated with the user's weapon.

  Targets:
  - Select unit(s) to play the animation on.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Attack Animation 2+
- Plays the animation associated with the user's other weapons.
- Plays nothing if there is no other weapon equipped.

  Targets:
  - Select unit(s) to play the animation on.

  Slot:
  - Which weapon slot to get this data from?
  - Main-hand weapon is weapon slot 1.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Cast Animation
- Plays the cast animation associated with the action.

  Targets:
  - Select unit(s) to play the animation on.

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Change Battle Portrait
- Changes the battle portrait of the actor (if it's an actor).
- Can be used outside of battle/action sequences.

  Targets:
  - Select unit(s) to play the animation on.
  - Valid units can only be actors.

  Filename:
  - Select the file to change the actor's portrait to.

---

CoreEngine PointAni.gif

ANIM: Play at Coordinate
- Plays an animation on the screen at a specific x, y coordinate.
- Requires VisuMZ_0_CoreEngine!

  Animation ID:
  - Plays this animation.

  Coordinates:

    X:
    Y:
    - X/Y coordinate used for the animation.
      You may use JavaScript code.

  Mirror Animation?:
  - Mirror the animation?

  Mute Animation?:
  - Mute the animation?

  Wait for Completion?:
  - Wait the animation to finish before continuing?

---

ANIM: Show Animation
- Plays the a specific animation on unit(s).

  Targets:
  - Select unit(s) to play the animation on.

  Animation ID:
  - Select which animation to play on unit(s).

  Mirror Animation:
  - Mirror the animation?

  Wait For Animation?:
  - Wait for animation to complete before performing next command?

---

ANIM: Wait For Animation
- Causes the interpreter to wait for any animation(s) to finish.

---

Action Sequences - Battle Log

BattleCoreBattleLog.png

These Action Sequences are related to the Battle Log Window, the window found at the top of the battle screen.

---

BTLOG: Add Text
- Adds a new line of text into the Battle Log.

  Text:
  - Add this text into the Battle Log.
  - Text codes allowed.

  Copy to Combat Log?:
  - Copies text to the Combat Log.
  - Requires VisuMZ_4_CombatLog

    Combat Log Icon:
    - What icon would you like to bind to this entry?
    - Requires VisuMZ_4_CombatLog

---

BTLOG: Clear Battle Log
- Clears all the text in the Battle Log.

---

BTLOG: Display Action
- plays the current action in the Battle Log.

---

BTLOG: Pop Base Line
- Removes the Battle Log's last added base line and  all text up to its
  former location.

---

BTLOG: Push Base Line
- Adds a new base line to where the Battle Log currently is at.

---

BTLOG: Refresh Battle Log
- Refreshes the Battle Log.

---

BTLOG: UI Show/Hide
- Shows or hides the Battle UI (including the Battle Log).

  Show/Hide?:
  - Shows/hides the Battle UI.

---

BTLOG: Wait For Battle Log
- Causes the interpreter to wait for the Battle Log to finish.

---

BTLOG: Wait For New Line
- Causes the interpreter to wait for a new line in the Battle Log.

---

Action Sequences - Camera

VisuMZ ActSeqCamera Pan.gif

These Action Sequences are battle camera-related. Requires VisuMZ_3_ActSeqCamera!

---

CAMERA: Clamp ON/OFF
- Turns battle camera clamping on/off.
- Requires VisuMZ_3_ActSeqCamera!

  Setting:
  - Turns camera clamping on/off.

---

CAMERA: Focus Point
- Focus the battle camera on a certain point in the screen.
- Requires VisuMZ_3_ActSeqCamera!

  X Coordinate:
  - Insert the point to focus the camera on.
  - You may use JavaScript code.

  Y Coordinate:
  - Insert the point to focus the camera on.
  - You may use JavaScript code.

  Duration:
  - Duration in frames for camera focus change.

  Camera Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Camera?
  - Wait for camera changes to complete before performing next command?

---

CAMERA: Focus Target(s)
- Focus the battle camera on certain battler target(s).
- Requires VisuMZ_3_ActSeqCamera!

  Targets:
  - Select unit(s) to focus the battle camera on.

  Duration:
  - Duration in frames for camera focus change.

  Camera Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Camera?
  - Wait for camera changes to complete before performing next command?

---

CAMERA: Offset
- Offset the battle camera from the focus target.
- Requires VisuMZ_3_ActSeqCamera!

  Offset X:
  - How much to offset the camera X by.
  - Negative: left. Positive: right.

  Offset Y:
  - How much to offset the camera Y by.
  - Negative: up. Positive: down.

  Duration:
  - Duration in frames for offset change.

  Camera Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Camera?
  - Wait for camera changes to complete before performing next command?

---

CAMERA: Reset
- Reset the battle camera settings.
- Requires VisuMZ_3_ActSeqCamera!

  Reset Focus?:
  - Reset the focus point?

  Reset Offset?:
  - Reset the camera offset?

  Duration:
  - Duration in frames for reset change.

  Camera Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Camera?
  - Wait for camera changes to complete before performing next command?

---

CAMERA: Wait For Camera
- Waits for camera changes to complete before performing next command.
- Requires VisuMZ_3_ActSeqCamera!

---

Action Sequences - Dragonbones

DragonbonesBattler.gif

These Action Sequences are Dragonbones-related. Requires VisuMZ_2_DragonbonesUnion!

---

DB: Dragonbones Animation
- Causes the unit(s) to play a Dragonbones motion animation.
- Requires VisuMZ_2_DragonbonesUnion!

  Targets:
  - Select which unit(s) to perform a motion animation.

  Motion Animation:
  - What is the name of the Dragonbones motion animation you wish to play?

---

DB: Dragonbones Time Scale
- Causes the unit(s) to change their Dragonbones time scale.
- Requires VisuMZ_2_DragonbonesUnion!

  Targets:
  - Select which unit(s) to perform a motion animation.

  Time Scale:
  - Change the value of the Dragonbones time scale to this.

---

Action Sequences - Elements

Elements.png

These Action Sequences can change up the element(s) used for the action's damage calculation midway through an action.

They also require the VisuMZ_1_ElementStatusCore plugin to be present in order for them to work.

---

ELE: Add Elements
- Adds element(s) to be used when calculating damage.
- Requires VisuMZ_1_ElementStatusCore!

  Elements:
  - Select which element ID to add onto the action.
  - Insert multiple element ID's to add multiple at once.

---

ELE: Clear Element Changes
- Clears all element changes made through Action Sequences.
- Requires VisuMZ_1_ElementStatusCore!

---

ELE: Force Elements
- Forces only specific element(s) when calculating damage.
- Requires VisuMZ_1_ElementStatusCore!

  Elements:
  - Select which element ID to force in the action.
  - Insert multiple element ID's to force multiple at once.

---

ELE: Null Element
- Forces no element to be used when calculating damage.
- Requires VisuMZ_1_ElementStatusCore!

---

Action Sequences - Horror Effects

HorrorEffects Battle.gif

HorrorEffects BattleParty.gif

HorrorEffects BattleEnemy.gif

These Action Sequences are Horror Effects-related.

Requires VisuMZ_2_HorrorEffects!

---

HORROR: Clear All Filters
- Clear all Horror Effects filters on the target battler(s).

  Targets:
  - Select unit(s) to remove Horror Effects for.

---

HORROR: Glitch Create
- Creates the glitch effect on the target battler(s).

  Targets:
  - Select unit(s) to create the Horror Effect for.

  Glitch Slices:
  - Glitch slices to be used with the target.

  Glitch Offset:
  - Default offset value.

  Glitch Animated?:
  - Animate the glitch effect?

  Glitch Frequency:
  - If animated, how frequent to make the glitch effect?
  - Lower = often     Higher = rarer

  Glitch Strength:
  - If animated, how strong is the glitch effect?
  - Lower = weaker     Higher = stronger

---

HORROR: Glitch Remove
- Removes the glitch effect on the target battler(s).

  Targets:
  - Select unit(s) to remove the Horror Effect for.

---

HORROR: Noise Create
- Creates the noise effect on the target battler(s).

  Targets:
  - Select unit(s) to create the Horror Effect for.

  Noise Rate:
  - Noise rate to be used with the target.

  Noise Animated:
  - Animate the noise for the target?

---

HORROR: Noise Remove
- Removes the noise effect on the target battler(s).

  Targets:
  - Select unit(s) to remove the Horror Effect for.

---

HORROR: TV Create
- Creates the TV effect on the target battler(s).

  Targets:
  - Select unit(s) to create the Horror Effect for.

  TV Line Thickness:
  - Default TV line thickness
  - Lower = thinner     Higher = thicker

  TV Corner Size:
  - Default TV line corner size
  - Lower = smaller     Higher = bigger

  TV Animated:
  - Animate the TV?

  TV Speed:
  - Speed used to animate the TV if animated
  - Lower = slower     Higher = faster

---

HORROR: TV Remove
- Removes the TV effect on the target battler(s).

  Targets:
  - Select unit(s) to remove the Horror Effect for.

---


---

Action Sequences - Impact

These Action Sequences are related to creating impact.

Requires VisuMZ_3_ActSeqImpact!

---

ActionSequenceImpact Bizarro.png

IMPACT: Bizarro Inversion
- Swaps blue/red colors on the battlefield.
- Requires VisuMZ_3_ActSeqImpact!

  Bizarro?:
  - Enable Bizarro Inversion effect?

---

ActSeqImpact ColorBreak.gif

IMPACT: Color Break
- Breaks the colors on the screen before reassembling.
- Requires VisuMZ_3_ActSeqImpact!

  Intensity:
  - What is the intensity of the color break effect?

  Duration:
  - What is the duration of the color break effect?

  Easing Type:
  - Select which easing type you wish to apply.

---

ActionSequenceImpact Desat.png

IMPACT: Desaturation
- Desaturates all colors on the battlefield.
- Requires VisuMZ_3_ActSeqImpact!
- Created by Manu Gaming!

  Desaturate?:
  - Enable Desaturation effect?

---

ActSeqImpact MotionBlur.gif

IMPACT: Motion Blur Screen
- Creates a motion blur on the whole screen.
- Requires VisuMZ_3_ActSeqImpact!

  Angle:
  - Determine what angle to make the motion blur at.

  Intensity Rate:
  - This determines intensity rate of the motion blur.
  - Use a number between 0 and 1.

  Duration:
  - How many frames should the motion blur last?
  - What do you want to be its duration?

  Easing Type:
  - Select which easing type you wish to apply.

---

IMPACT: Motion Blur Target(s)
- Creates a motion blur on selected target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to create motion blur effects for.

  Angle:
  - Determine what angle to make the motion blur at.

  Intensity Rate:
  - This determines intensity rate of the motion blur.
  - Use a number between 0 and 1.

  Duration:
  - How many frames should the motion blur last?
  - What do you want to be its duration?

  Easing Type:
  - Select which easing type you wish to apply.

---

ActSeqImpact MotionTrail.gif

IMPACT: Motion Trail Create
- Creates a motion trail effect for the target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to create motion trail effects for.

  Delay:
  - How many frames to delay by when creating a motion trail?
  - The higher the delay, the less motion trails there are.

  Duration:
  - How many frames should the motion trail last?
  - What do you want to be its duration?

  Hue:
  - What do you want to be the hue for the motion trail?

  Starting Opacity:
  - What starting opacity value do you want for the motion trail?
  - Opacity values decrease over time.

  Tone:
  - What tone do you want for the motion trail?
  - Format: [Red, Green, Blue, Gray]

---

IMPACT: Motion Trail Remove
- Removes the motion trail effect from the target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to clear motion trail effects for.

---

ActionSequenceImpact Negative.png

IMPACT: Negative Inversion
- Inverts all the colors on the battlefield.
- Requires VisuMZ_3_ActSeqImpact!
- Created by Manu Gaming!

  Negative?:
  - Enable Negative Inversion effect?

---

ActionSequenceImpact Oversat.png

IMPACT: Oversaturation
- Oversaturates colors on the battlefield.
- Requires VisuMZ_3_ActSeqImpact!

  Oversaturate?:
  - Enable Oversaturation effect?

---

ActSeqImpact Shockwave.gif

IMPACT: Shockwave at Point
- Creates a shockwave at the designated coordinates.
- Requires VisuMZ_3_ActSeqImpact!

  Point: X:
  Point: Y:
  - What x/y coordinate do you want to create a shockwave at?
  - You can use JavaScript code.

  Amplitude:
  - What is the aplitude of the shockwave effect?

  Wavelength:
  - What is the wavelength of the shockwave effect?

  Duration:
  - What is the duration of the shockwave?

---

IMPACT: Shockwave from Each Target(s)
- Creates a shockwave at each of the target(s) location(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to start a shockwave from.

  Target Location:
  - Select which part target group to start a shockwave from.

    Offset X:
    Offset Y:
    - How much to offset the shockwave X/Y point by.

  Amplitude:
  - What is the aplitude of the shockwave effect?

  Wavelength:
  - What is the wavelength of the shockwave effect?

  Duration:
  - What is the duration of the shockwave?

---

IMPACT: Shockwave from Target(s) Center
- Creates a shockwave from the center of the target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to start a shockwave from.

  Target Location:
  - Select which part target group to start a shockwave from.

    Offset X:
    Offset Y:
    - How much to offset the shockwave X/Y point by.

  Amplitude:
  - What is the aplitude of the shockwave effect?

  Wavelength:
  - What is the wavelength of the shockwave effect?

  Duration:
  - What is the duration of the shockwave?

---

ActionSequenceImpact TimeSlow.gif

ActionSequenceImpact TimeFast.gif

IMPACT: Time Scale
- Adjust time to go faster or slower!
- Requires VisuMZ_3_ActSeqImpact!
- Created by Manu Gaming!

  Scale:
  - Adjusts how fast/slow time goes.
  - 1.00 is normal. Lower is slower. Higher is faster.

---

ActionSequenceImpact TimeStop.gif

IMPACT: Time Stop
- Stops time for a set amount of milliseconds.
- Requires VisuMZ_3_ActSeqImpact!
- Created by Manu Gaming!

  Milliseconds:
  - How many milliseconds should time stop for?
  - 1000 milliseconds = 1 second.

---

ActSeqImpact ZoomBlur.gif

IMPACT: Zoom Blur at Point
- Creates a zoom blur at the designated coordinates.
- Requires VisuMZ_3_ActSeqImpact!

  Point: X:
  Point: Y:
  - What x/y coordinate do you want to focus the zoom at?
  - You can use JavaScript code.

  Zoom Strength:
  - What is the strength of the zoom effect?
  - Use a number between 0 and 1.

  Visible Radius:
  - How much of a radius should be visible from the center?

  Duration:
  - What is the duration of the zoom blur?

  Easing Type:
  - Select which easing type you wish to apply.

---

IMPACT: Zoom Blur at Target(s) Center
- Creates a zoom blur at the center of targets.
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to start a zoom blur from.

  Target Location:
  - Select which part target group to start a zoom blur from.

    Offset X:
    Offset Y:
    - How much to offset the zoom blur X/Y point by.

  Zoom Strength:
  - What is the strength of the zoom effect?
  - Use a number between 0 and 1.

  Visible Radius:
  - How much of a radius should be visible from the center?

  Duration:
  - What is the duration of the zoom blur?

  Easing Type:
  - Select which easing type you wish to apply.

---

Action Sequences - Inject

These Action Sequences are related to injecting sprite animations. Requires VisuMZ_3_ActSeqImpact!

---

ActSeqImpact Inject.gif

INJECT: Animation Begin
- Injects and plays a whole spritesheet animation.
- The spritesheet animation will play over the battler until it is finished.
- The battler's original sprite will be invisible until finished.
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to inject the animation on.

  Filename:
  - Select the animation spritesheet file.
  - Located in the /img/sv_actors/ folder.

    Horizontal Cells:
    - How many horizontal cells (or columns) are there?

    Vertical Cells:
    - How many vertical cells (or rows) are there?

    Frame Delay:
    - How many frames are played inbetween cells?

    Smooth Bitmap?:
    - Smooth the spritesheet graphic?

  Offset:

    Offset X:
    - Offsets the X position of the injected animation.
    - Negative: left. Positive: right.

    Offset Y:
    - Offsets the Y position of the injected animation.
    - Negative: up. Positive: down.

---

INJECT: Animation End
- Stops and ends any injected animations on target(s).
- Any inject animation will be prematurely terminated.
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to stop injected animation(s).

---

INJECT: Animation Pause/Resume
- Pauses/resumes any injected animations on target(s).
- Requires VisuMZ_3_ActSeqImpact!

  Targets:
  - Select unit(s) to pause/resume injected animation(s).

  Pause?:
  - Pause the injected animation?

---

INJECT: Wait For Injected Animation
- Waits for injected animations to complete before performing next command.
- Requires VisuMZ_3_ActSeqImpact!

---

Action Sequences - Mechanics

BattleCoreDmgPopups.png

These Action Sequences are related to various mechanics related to the battle system.

---

MECH: Action Effect
- Causes the unit(s) to take damage/healing from action and incurs any
  changes made such as buffs and states.

  Targets:
  - Select unit(s) to receive the current action's effects.

---

MECH: Active Chain Input Disable
- Disables input for Active Chain Skills at this time.
- Requires VisuMZ_3_ActiveChainSkills!

---

MECH: Add Buff/Debuff
- Adds buff(s)/debuff(s) to unit(s).
- Determine which parameters are affected and their durations.

  Targets:
  - Select unit(s) to receive the buff(s) and/or debuff(s).

  Buff Parameters:
  - Select which parameter(s) to buff.
  - Insert a parameter multiple times to raise its stacks.

  Debuff Parameters:
  - Select which parameter(s) to debuff.
  - Insert a parameter multiple times to raise its stacks.

  Turns:
  - Number of turns to set the parameter(s) buffs to.
  - You may use JavaScript code.

---

MECH: Add State
- Adds state(s) to unit(s).

  Targets:
  - Select unit(s) to receive the buff(s).

  States:
  - Select which state ID(s) to add to unit(s).
  - Insert multiple state ID's to add multiple at once.

---

MECH: Analyze Weakness
- Reveal elemental weakness(es) from target(s).
- Requires VisuMZ_3_WeaknessDisplay!

  Targets:
  - Select unit(s) to reveal elemental weaknesses for.

  Reveal:
  - How many elemental weaknesses do you wish to reveal?
  - You may use JavaScript code.

---

MECH: Armor Penetration
- Adds an extra layer of defensive penetration/reduction.
- You may use JavaScript code for any of these.

  Armor/Magic Penetration:

    Rate:
    - Penetrates an extra multiplier of armor by this value.

    Flat:
    - Penetrates a flat amount of armor by this value.

  Armor/Magic Reduction:

    Rate:
    - Reduces an extra multiplier of armor by this value.

    Flat:
    - Reduces a flat amount of armor by this value.

---

MECH: ATB Gauge
- Alters the ATB/TPB Gauges.
- Requires VisuMZ_2_BattleSystemATB!

  Targets:
  - Select unit(s) to alter the ATB/TPB Gauges for.

  Charging:

    Charge Rate:
    - Changes made to the ATB Gauge if it is currently charging.

  Casting:

    Cast Rate:
    - Changes made to the ATB Gauge if it is currently casting.

    Interrupt?:
    - Interrupt the ATB Gauge if it is currently casting?

---

MECH: Boost Points Change
- Changes Boost Points for target(s).
- Requires VisuMZ_3_BoostAction!

  Targets:
  - Select unit(s) to alter the Boost Points for.

  Alter Boost Points By:
  - Alters the unit(s) Boost Points.
  - Positive for gaining points. Negative for losing points.

---

MECH: Boost Store Data
- Stores the number of Boosts used this action inside a variable.
- Requires VisuMZ_3_BoostAction!

  Variable ID:
  - Which variable do you want to store the data inside?

---

MECH: Break Shield Change
- Changes Break Shields for target(s) if not Break Stunned.
- Requires VisuMZ_4_BreakShields!

  Targets:
  - Select unit(s) to alter the Break Shields for.

  Alter Break Shields By:
  - Alters the unit(s) Break Shields.
  - Positive for gaining shields. Negative for losing shields.

---

MECH: Break Shield Reset
- Resets Break Shields for target(s) if not Break Stunned.
- Requires VisuMZ_4_BreakShields!

  Targets:
  - Select unit(s) to reset the Break Shields for.

---

MECH: BTB Brave Points
- Alters the target(s) Brave Points to an exact value.
- Requires VisuMZ_2_BattleSystemBTB!

  Targets:
  - Select unit(s) to alter the ATB/TPB Gauges for.

  Alter Brave Points By:
  - Alters the target(s) Brave Points.
  - Positive for gaining BP.
  - Negative for losing BP.

---

MECH: Collapse
- Causes the unit(s) to perform its collapse animation if the unit(s)
  has died.

  Targets:
  - Select unit(s) to process a death collapse.

  Force Death:
  - Force death even if the unit has not reached 0 HP?
  - This will remove immortality.

  Wait For Effect?:
  - Wait for the collapse effect to complete before performing next command?

---

MECH: CTB Order
- Alters the CTB Turn Order.
- Requires VisuMZ_2_BattleSystemCTB!

  Targets:
  - Select unit(s) to alter the CTB Turn Order for.

  Change Order By:
  - Changes turn order for target(s) by this amount.
  - Positive increases wait. Negative decreases wait.

---

MECH: CTB Speed
- Alters the CTB Speed.
- Requires VisuMZ_2_BattleSystemCTB!

  Targets:
  - Select unit(s) to alter the CTB Speed for.

  Charge Rate:
  - Changes made to the CTB Speed if it is currently charging.

  Cast Rate:
  - Changes made to the CTB Speed if it is currently casting.

---

MECH: Custom Damage Formula
- Changes the current action's damage formula to custom.
- This will assume the MANUAL damage style.

  Formula:
  - Changes the current action's damage formula to custom.
  - Use 'default' to revert the damage formula.

---

MECH: Damage Popup
- Causes the unit(s) to display the current state of damage received
  or healed.

  Targets:
  - Select unit(s) to prompt a damage popup.

---

MECH: Enemy Escape
- Causes the enemy unit(s) to escape.

  Targets:
  - Select unit(s) to escape.

---

MECH: Dead Label Jump
- If the active battler is dead, jump to a specific label in the
  common event.

  Jump To Label:
  - If the active battler is dead, jump to this specific label in the
    common event.

---

MECH: ETB Energy Count
- Alters the subject team's available Energy Count.
- Requires VisuMZ_2_BattleSystemETB!

  Energy Count:
  - Alters the subject team's available Energy Count.
  - Positive for gaining energy. Negative for losing energy.

---

MECH: FTB Action Count
- Alters the subject team's available Action Count.
- Requires VisuMZ_2_BattleSystemFTB!

  Action Count:
  - Alters the subject team's available Action Count.
  - Positive for gaining actions. Negative for losing actions.

---

MECH: HP, MP, TP
- Alters the HP, MP, and TP values for unit(s).
- Positive values for healing. Negative values for damage.

  Targets:
  - Select unit(s) to receive the current action's effects.

  HP, MP, TP:

    Rate:
    - Changes made to the parameter based on rate.
    - Positive values for healing. Negative values for damage.

    Flat:
    - Flat changes made to the parameter.
    - Positive values for healing. Negative values for damage.

  Damage Popup?:
  - Display a damage popup after?

---

MECH: Immortal
- Changes the immortal flag of targets. If immortal flag is removed and a
  unit would die, collapse that unit.

  Targets:
  - Alter the immortal flag of these groups. If immortal flag is removed and
    a unit would die, collapse that unit.

  Immortal:
  - Turn immortal flag for unit(s) on/off?

---

MECH: Multipliers
- Changes the multipliers for the current action.
- You may use JavaScript code for any of these.

  Critical Hit%:

    Rate:
    - Affects chance to land a critical hit by this multiplier.

    Flat:
    - Affects chance to land a critical hit by this flat bonus.

  Critical Damage

    Rate:
    - Affects critical damage by this multiplier.

    Flat:
    - Affects critical damage by this flat bonus.

  Damage/Healing

    Rate:
    - Sets the damage/healing multiplier for current action.

    Flat:
    - Sets the damage/healing bonus for current action.

  Hit Rate

    Rate:
    - Affects chance to connect attack by this multiplier.

    Flat:
    - Affects chance to connect attack by this flat bonus.

---

MECH: Once Parallel
- Plays a Common Event parallel to the battle event once without repeating
  itself when done.

  Common Event ID:
  - The ID of the parallel Common Event to play.
  - Does NOT repeat itself when finished.
  - When exiting battle scene, all Once Parallels are cleared.
  - Once Parallels are not retained upon reentering the scene.
  - Once Parallels are not stored in memory and cannot be saved.

---

MECH: OTB Order
- Alters the OTB Turn Order. Best used with single targets.
- Requires VisuMZ_2_BattleSystemOTB!

  Targets:
  - Select unit(s) to alter the OTB Turn Order for.

  Current Turn By:
  - Changes turn order for target(s) by this amount.
  - Positive increases wait. Negative decreases wait.

  Next Turn By:
  - Changes turn order for target(s) by this amount.
  - Positive increases wait. Negative decreases wait.

  Follow Turn By:
  - Changes turn order for target(s) by this amount.
  - Positive increases wait. Negative decreases wait.

---

MECH: PTB Alter Cost
- Alters the action's cost settings.
- Requires VisuMZ_2_BattleSystemPTB!

  Override?:
  - Overrides any 'permanent' settings for Changeability?

  Alter Changeability:
  - Allow the cost type and value to be changeable?

  Alter Cost Type:
  - Change the cost type to this scenario.
  - Use 'Unchanged' for no changes.

  Alter Cost Value:
  - What is the default action cost for this scenario?

---

MECH: PTB Conversion
- Converts full actions into half actions.
- Requires VisuMZ_2_BattleSystemPTB!

  Conversion Count:
  - Converts full actions into half actions.
  - If not enough, consume half actions.

---

MECH: PTB Full/Half Action(s)
- Alters the subject team's available Full/Half Actions.
- Requires VisuMZ_2_BattleSystemPTB!

  Full Actions:
  - Alters the subject team's available Full Actions.
  - Positive for gaining. Negative for losing.

  Half Actions:
  - Alters the subject team's available Half Actions.
  - Positive for gaining. Negative for losing.

---

MECH: Remove Buff/Debuff
- Removes buff(s)/debuff(s) from unit(s).
- Determine which parameters are removed.

  Targets:
  - Select unit(s) to have the buff(s) and/or debuff(s) removed.

  Buff Parameters:
  - Select which buffed parameter(s) to remove.

  Debuff Parameters:
  - Select which debuffed parameter(s) to remove.

---

MECH: Remove State
- Remove state(s) from unit(s).

  Targets:
  - Select unit(s) to have states removed from.

  States:
  - Select which state ID(s) to remove from unit(s).
  - Insert multiple state ID's to remove multiple at once.

---

MECH: STB Exploit Effect
- Utilize the STB Exploitation mechanics!
- Requires VisuMZ_2_BattleSystemSTB!

  Target(s) Exploited?:
  - Exploit the below targets?

    Targets:
    - Select unit(s) to become exploited.

    Force Exploitation:
    - Force the exploited status?

  User Exploiter?:
  - Allow the user to become the exploiter?

    Force Exploitation:
    - Force the exploiter status?

---

MECH: STB Extra Action
- Adds an extra action for the currently active battler.
- Requires VisuMZ_2_BattleSystemSTB!

  Extra Actions:
  - How many extra actions should the active battler gain?
  - You may use JavaScript code.

---

MECH: STB Remove Excess Actions
- Removes excess actions from the active battler.
- Requires VisuMZ_2_BattleSystemSTB!

  Remove Actions:
  - How many actions to remove from the active battler?
  - You may use JavaScript code.

---

MECH: Swap Weapon
- Causes the unit(s) to swap their weapon for another.
- Requires VisuMZ_2_WeaponSwapSystem!

  Targets:
  - Select unit(s) to swap weapons for.

  Weapon Type ID:
  - Which weapon type to swap to?
  - This is NOT the weapon's ID.
  - It's the weapon TYPE.

---

MECH: Text Popup
- Causes the unit(s) to display a text popup.

  Targets:
  - Select unit(s) to prompt a text popup.

  Text:
  - What text do you wish to display?

  Text Color:
  - Use #rrggbb for custom colors or regular numbers for text colors from
    the Window Skin.

  Flash Color:
  - Adjust the popup's flash color.
  - Format: [red, green, blue, alpha]

  Flash Duration:
  - What is the frame duration of the flash effect?

---

MECH: Variable Popup
- Causes the unit(s) to display a popup using the data stored inside
  a variable.

  Targets:
  - Select unit(s) to prompt a text popup.

  Variable:
  - Get data from which variable to display as a popup?

  Digit Grouping:
  - Use digit grouping to separate numbers?
  - Requires VisuMZ_0_CoreEngine!

  Text Color:
  - Use #rrggbb for custom colors or regular numbers for text colors from
    the Window Skin.

  Flash Color:
  - Adjust the popup's flash color.
  - Format: [red, green, blue, alpha]

  Flash Duration:
  - What is the frame duration of the flash effect?

---

MECH: Wait For Effect
- Waits for the effects to complete before performing next command.

---

Action Sequences - Motion

BattleCoreActSeqSet.gif

These Action Sequences allow you the ability to control the motions of sideview sprites.

---

MOTION: Clear Freeze Frame
- Clears any freeze frames from the unit(s).

  Targets:
  - Select which unit(s) to clear freeze frames for.

---

MOTION: Freeze Motion Frame
- Forces a freeze frame instantly at the selected motion.
- Automatically clears with a new motion.

  Targets:
  - Select which unit(s) to freeze motions for.

  Motion Type:
  - Freeze this motion for the unit(s).

  Frame Index:
  - Which frame do you want to freeze the motion on?
  - Frame index values start at 0.

  Show Weapon?:
  - If using 'attack', 'thrust', 'swing', or 'missile', display the
    weapon sprite?

---

MOTION: Motion Type
- Causes the unit(s) to play the selected motion.

  Targets:
  - Select which unit(s) to perform a motion.

  Motion Type:
  - Play this motion for the unit(s).

  Show Weapon?:
  - If using 'attack', 'thrust', 'swing', or 'missile', display the
    weapon sprite?

---

MOTION: Perform Action
- Causes the unit(s) to play the proper motion based on the current action.

  Targets:
  - Select which unit(s) to perform a motion.

---

MOTION: Refresh Motion
- Cancels any set motions unit(s) has to do and use their most natural
  motion at the moment.

  Targets:
  - Select which unit(s) to refresh their motion state.

---

MOTION: Wait By Motion Frame
- Creates a wait equal to the number of motion frames passing.
- Time is based on Plugin Parameters => Actors => Motion Speed.

  Motion Frames to Wait?:
  - Each "frame" is equal to the value found in
    Plugin Parameters => Actors => Motion Speed

---

Action Sequences - Movement

BattleCoreActSeqSet.gif

These Action Sequences allow you the ability to control the sprites of actors and enemies in battle.

---

MOVE: Battle Step
- Causes the unit(s) to move forward past their home position to prepare
  for action.

  Targets:
  - Select which unit(s) to move.

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Change Home By Distance
- Change unit(s)'s home position by a distance from their current home
  position(s).
- Sideview-only!

  Targets:
  - Select which unit(s) to change home position(s) for.

  Distance Adjustment:
  - Makes adjustments to distance values to determine which direction to
    change by.
    - Normal - No adjustments made
    - Horizontal - Actors adjust left, Enemies adjust right
    - Vertical - Actors adjust Up, Enemies adjust down
    - Both - Applies both Horizontal and Vertical

    Distance: X:
    - Horizontal distance to move.
    - You may use JavaScript code.

    Distance: Y:
    - Vertical distance to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total change amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Change Home To Point
- Change home position(s) to a target point on the screen.
- Sideview-only! Points based off Graphics.boxWidth/Height.

  Targets:
  - Select which unit(s) to change home position(s) for.

  Destination Point:
  - Select which point to face.
    - Center
    - Point X, Y
      - Replace 'x' and 'y' with coordinates

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total change amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Change Home To Target(s)
- Moves unit(s) to another unit(s) on the battle field.
- Sideview-only!

  Targets (Moving):
  - Select which unit(s) to change home position(s) for.

  Targets (Destination):
  - Select which unit(s) to change home position to.

    Target Location:
    - Select which part target group to change home position to.
      - front head
      - front center
      - front base
      - middle head
      - middle center
      - middle base
      - back head
      - back center
      - back base

    Melee Distance:
    - The melee distance away from the target location in addition to the
      battler's width.

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total change amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Face Direction
- Causes the unit(s) to face forward or backward.
- Sideview-only!

  Targets:
  - Select which unit(s) to change direction.

  Direction:
  - Select which direction to face.

---

MOVE: Face Point
- Causes the unit(s) to face a point on the screen.
- Sideview-only!

  Targets:
  - Select which unit(s) to change direction.

  Point:
  - Select which point to face.
    - Home
    - Center
    - Point X, Y
      - Replace 'x' and 'y' with coordinates

  Face Away From?:
  - Face away from the point instead?

---

MOVE: Face Target(s)
- Causes the unit(s) to face other targets on the screen.
- Sideview-only!

  Targets (facing):
  - Select which unit(s) to change direction.

  Targets (destination):
  - Select which unit(s) for the turning unit(s) to face.

  Face Away From?:
  - Face away from the unit(s) instead?

---

MOVE: Float
- Causes the unit(s) to float above the ground.
- Sideview-only!

  Targets:
  - Select which unit(s) to make float.

  Desired Height:
  - Vertical distance to float upward.
  - You may use JavaScript code.

  Duration:
  - Duration in frames for total float amount.

  Float Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Float?:
  - Wait for floating to complete before performing next command?

---

MOVE: Home Reset
- Causes the unit(s) to move back to their home position(s) and face back to
  their original direction(s).

  Targets:
  - Select which unit(s) to move.

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Jump
- Causes the unit(s) to jump into the air.
- Sideview-only!

  Targets:
  - Select which unit(s) to make jump.

  Desired Height:
  - Max jump height to go above the ground
  - You may use JavaScript code.

  Duration:
  - Duration in frames for total jump amount.

  Wait For Jump?:
  - Wait for jumping to complete before performing next command?

---

MOVE: Move Distance
- Moves unit(s) by a distance from their current position(s).
- Sideview-only!

  Targets:
  - Select which unit(s) to move.

  Distance Adjustment:
  - Makes adjustments to distance values to determine which direction to
    move unit(s).
    - Normal - No adjustments made
    - Horizontal - Actors adjust left, Enemies adjust right
    - Vertical - Actors adjust Up, Enemies adjust down
    - Both - Applies both Horizontal and Vertical

    Distance: X:
    - Horizontal distance to move.
    - You may use JavaScript code.

    Distance: Y:
    - Vertical distance to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total movement amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Move To Point
- Moves unit(s) to a designated point on the screen.
- Sideview-only! Points based off Graphics.boxWidth/Height.

  Targets:
  - Select which unit(s) to move.

  Destination Point:
  - Select which point to face.
    - Home
    - Center
    - Point X, Y
      - Replace 'x' and 'y' with coordinates

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total movement amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Move To Target(s)
- Moves unit(s) to another unit(s) on the battle field.
- Sideview-only!

  Targets (Moving):
  - Select which unit(s) to move.

  Targets (Destination):
  - Select which unit(s) to move to.

    Target Location:
    - Select which part target group to move to.
      - front head
      - front center
      - front base
      - middle head
      - middle center
      - middle base
      - back head
      - back center
      - back base

    Melee Distance:
    - The melee distance away from the target location in addition to the
      battler's width.

  Offset Adjustment:
  - Makes adjustments to offset values to determine which direction to
    adjust the destination by.

    Offset: X:
    - Horizontal offset to move.
    - You may use JavaScript code.

    Offset: Y:
    - Vertical offset to move.
    - You may use JavaScript code.

  Duration:
  - Duration in frames for total movement amount.

  Face Destination?:
  - Turn and face the destination?

  Movement Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Movement Motion:
  - Play this motion for the unit(s).

  Wait For Movement?:
  - Wait for movement to complete before performing next command?

---

MOVE: Opacity
- Causes the unit(s) to change opacity.
- Sideview-only!

  Targets:
  - Select which unit(s) to change opacity.

  Desired Opacity:
  - Change to this opacity value.
  - You may use JavaScript code.

  Duration:
  - Duration in frames for opacity change.

  Opacity Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Opacity?:
  - Wait for opacity changes to complete before performing next command?

---

ActSeqGrowShrink.gif

MOVE: Scale/Grow/Shrink
- Causes the unit(s) to scale, grow, or shrink?.
- Sideview-only!

  Targets:
  - Select which unit(s) to change the scale of.

  Scale X:
  Scale Y:
  - What target scale value do you want?
  - 1.0 is normal size.

  Duration:
  - Duration in frames to scale for.

  Scale Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Scale?:
  - Wait for scaling to complete before performing next command?

---

ActSeqSkew.gif

MOVE: Skew/Distort
- Causes the unit(s) to skew.
- Sideview-only!

  Targets:
  - Select which unit(s) to skew.

  Skew X:
  Skew Y:
  - What variance to skew?
  - Use small values for the best results.

  Duration:
  - Duration in frames to skew for.

  Skew Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Skew?:
  - Wait for skew to complete before performing next command?

---

ActSeqSpin.gif

MOVE: Spin/Rotate
- Causes the unit(s) to spin.
- Sideview-only!

  Targets:
  - Select which unit(s) to spin.

  Angle:
  - How many degrees to spin?

  Duration:
  - Duration in frames to spin for.

  Spin Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Revert Angle on Finish:
  - Upon finishing the spin, revert the angle back to 0.

  Wait For Spin?:
  - Wait for spin to complete before performing next command?

---

MOVE: Wait For Float
- Waits for floating to complete before performing next command.

---

MOVE: Wait For Jump
- Waits for jumping to complete before performing next command.

---

MOVE: Wait For Movement
- Waits for movement to complete before performing next command.

---

MOVE: Wait For Opacity
- Waits for opacity changes to complete before performing next command.

---

MOVE: Wait For Scale
- Waits for scaling to complete before performing next command.

---

MOVE: Wait For Skew
- Waits for skewing to complete before performing next command.

---

MOVE: Wait For Spin
- Waits for spinning to complete before performing next command.

---


Action Sequences - Projectiles

Create projectiles on the screen and fire them off at a target. Requires VisuMZ_3_ActSeqProjectiles!

---

ActSeqProj Ani.gif

PROJECTILE: Animation
- Create an animation projectile and fire it at a target.
- Requires VisuMZ_3_ActSeqProjectiles!

  Coordinates:

    Start Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should start from.
        - Target - Start from battler target(s)
        - Point - Start from a point on the screen

        Target(s):
        - Select which unit(s) to start the projectile from.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile from.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to start the projectile at.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

    Goal Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should go to.
        - Target - Goal is battler target(s)
        - Point - Goal is a point on the screen

        Target(s):
        - Select which unit(s) for projectile to go to.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile to.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to send the projectile to.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

  Settings:

    Animation ID:
    - Determine which animation to use as a projectile.

    Duration:
    - Duration for the projectile(s) to travel.

    Wait For Projectile?:
    - Wait for projectile(s) to reach their destination before going onto
      the next command?

    Wait For Animation?:
    - Wait for animation to finish before going to the next command?

    Extra Settings:
    - Add extra settings to the projectile?

      Auto Angle?:
      - Automatically angle the projectile to tilt the direction
        it's moving?

      Angle Offset:
      - Alter the projectile's tilt by this many degrees.

      Arc Peak:
      - This is the height of the project's trajectory arc in pixels.

      Easing:
      - Select which easing type to apply to the projectile's trajectory.

      Spin Speed:
      - Determine how much angle the projectile spins per frame.
      - Does not work well with "Auto Angle".

---

ActSeqProj Icon.gif

PROJECTILE: Icon
- Create an icon projectile and fire it at a target.
- Requires VisuMZ_3_ActSeqProjectiles!

  Coordinates:

    Start Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should start from.
        - Target - Start from battler target(s)
        - Point - Start from a point on the screen

        Target(s):
        - Select which unit(s) to start the projectile from.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile from.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to start the projectile at.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

    Goal Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should go to.
        - Target - Goal is battler target(s)
        - Point - Goal is a point on the screen

        Target(s):
        - Select which unit(s) for projectile to go to.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile to.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to send the projectile to.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

  Settings:

    Icon:
    - Determine which icon to use as a projectile.
    - You may use JavaScript code.

    Duration:
    - Duration for the projectile(s) to travel.

    Wait For Projectile?:
    - Wait for projectile(s) to reach their destination before going onto
      the next command?

    Extra Settings:
    - Add extra settings to the projectile?

      Auto Angle?:
      - Automatically angle the projectile to tilt the direction
        it's moving?

      Angle Offset:
      - Alter the projectile's tilt by this many degrees.

      Arc Peak:
      - This is the height of the project's trajectory arc in pixels.

      Blend Mode:
      - What kind of blend mode do you wish to apply to the projectile?
        - Normal
        - Additive
        - Multiply
        - Screen

      Easing:
      - Select which easing type to apply to the projectile's trajectory.

      Hue:
      - Adjust the hue of the projectile.
      - Insert a number between 0 and 360.

      Scale:
      - Adjust the size scaling of the projectile.
      - Use decimals for exact control.

      Spin Speed:
      - Determine how much angle the projectile spins per frame.
      - Does not work well with "Auto Angle".

---

ActSeqProj Picture.gif

PROJECTILE: Picture
- Create a picture projectile and fire it at a target.
- Requires VisuMZ_3_ActSeqProjectiles!

  Coordinates:

    Start Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should start from.
        - Target - Start from battler target(s)
        - Point - Start from a point on the screen

        Target(s):
        - Select which unit(s) to start the projectile from.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile from.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to start the projectile at.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

    Goal Location:
    - Settings to determine where the projectile(s) start from.

      Type:
      - Select where the projectile should go to.
        - Target - Goal is battler target(s)
        - Point - Goal is a point on the screen

        Target(s):
        - Select which unit(s) for projectile to go to.

          Centralize:
          - Create one projectile at the center of the targets?
          - Or create a projectile for each target?

          Target Location:
          - Select which part of the target to send the projectile to.
          - front head
          - front center
          - front base
          - middle head
          - middle center
          - middle base
          - back head
          - back center
          - back base

        Point X:
        Point Y:
        - Insert the X/Y coordinate to send the projectile to.
        - You may use JavaScript code.

      Offset X:
      Offset Y:
      - Insert how many pixels to offset the X/Y coordinate by.
      - You may use JavaScript code.

  Settings:

    Picture Filename:
    - Determine which picture to use as a projectile.

    Duration:
    - Duration for the projectile(s) to travel.

    Wait For Projectile?:
    - Wait for projectile(s) to reach their destination before going onto
      the next command?

    Extra Settings:
    - Add extra settings to the projectile?

      Auto Angle?:
      - Automatically angle the projectile to tilt the direction
        it's moving?

      Angle Offset:
      - Alter the projectile's tilt by this many degrees.

      Arc Peak:
      - This is the height of the project's trajectory arc in pixels.

      Blend Mode:
      - What kind of blend mode do you wish to apply to the projectile?
        - Normal
        - Additive
        - Multiply
        - Screen

      Easing:
      - Select which easing type to apply to the projectile's trajectory.

      Hue:
      - Adjust the hue of the projectile.
      - Insert a number between 0 and 360.

      Scale:
      - Adjust the size scaling of the projectile.
      - Use decimals for exact control.

      Spin Speed:
      - Determine how much angle the projectile spins per frame.
      - Does not work well with "Auto Angle".

---

Action Sequences - Skew (Camera)

VisuMZ ActSeqCamera Skew.gif

These action sequences allow you to have control over the camera skew. Requires VisuMZ_3_ActSeqCamera!

---

SKEW: Change Skew
- Changes the camera skew.
- Requires VisuMZ_3_ActSeqCamera!

  Skew X:
  - Change the camera skew X to this value.

  Skew Y:
  - Change the camera skew Y to this value.

  Duration:
  - Duration in frames to change camera skew.

  Skew Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Skew?:
  - Wait for skew changes to complete before performing next command?

---

SKEW: Reset Skew
- Reset any skew settings.
- Requires VisuMZ_3_ActSeqCamera!

  Duration:
  - Duration in frames to reset camera skew.

  Skew Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Skew?:
  - Wait for skew changes to complete before performing next command?

---

SKEW: Wait For Skew
- Waits for skew changes to complete before performing next command.
- Requires VisuMZ_3_ActSeqCamera!

---

Action Sequences - Target

BattleCoreTargetActSeq.png

If using a manual target by target Action Sequence, these commands will give you full control over its usage.

Refer to the image above for reference on how this works.

---

TARGET: Current Index
- Sets the current index to this value.
- Then decide to jump to a label (optional).

  Set Index To:
  - Sets current targeting index to this value.
  - 0 is the starting index of a target group.

  Jump To Label:
  - If a target is found after the index change, jump to this label in the
    Common Event.

---

TARGET: Next Target
- Moves index forward by 1 to select a new current target.
- Then decide to jump to a label (optional).

  Jump To Label:
  - If a target is found after the index change, jump to this label in the
    Common Event.

---

TARGET: Previous Target
- Moves index backward by 1 to select a new current target.
- Then decide to jump to a label (optional).

  Jump To Label:
  - If a target is found after the index change, jump to this label in the
    Common Event.

---

TARGET: Random Target
- Sets index randomly to determine new currernt target.
- Then decide to jump to a label (optional).

  Force Random?:
  - Index cannot be its previous index amount after random.

  Jump To Label:
  - If a target is found after the index change, jump to this label in the
    Common Event.

---

Action Sequences - Weapon

BattleCore DualWield.gif

Allows for finer control over Dual/Multi Wielding actors.

Only works for Actors.

---

WEAPON: Clear Weapon Slot
- Clears the active weapon slot (making others valid again).
- Only works for Actors.

  Targets:
  - Select unit(s) to clear the active weapon slot for.

---

WEAPON: Next Weapon Slot
- Goes to next active weapon slot (making others invalid).
- If next slot is weaponless, don't label jump.

  Targets:
  - Select unit(s) to change the next active weapon slot for.

---

WEAPON: Set Weapon Slot
- Sets the active weapon slot (making others invalid).
- Only works for Actors.

  Targets:
  - Select unit(s) to change the active weapon slot for.

  Weapon Slot ID:
  - Select weapon slot to make active (making others invalid).
  - Use 0 to clear and normalize. You may use JavaScript code.

---

Action Sequences - Zoom (Camera)

VisuMZ ActSeqCamera Zoom.gif

These Action Sequences are zoom-related. Requires VisuMZ_3_ActSeqCamera!

---

ZOOM: Change Scale
- Changes the zoom scale.
- Requires VisuMZ_3_ActSeqCamera!

  Scale:
  - The zoom scale to change to.

  Duration:
  - Duration in frames to reset battle zoom.

  Zoom Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Zoom?
  - Wait for zoom changes to complete before performing next command?

---

ZOOM: Reset Zoom
- Reset any zoom settings.
- Requires VisuMZ_3_ActSeqCamera!

  Duration:
  - Duration in frames to reset battle zoom.

  Zoom Easing:
  - Select which easing type you wish to apply.
  - Requires VisuMZ_0_CoreEngine.

  Wait For Zoom?
  - Wait for zoom changes to complete before performing next command?

---

ZOOM: Wait For Zoom
- Waits for zoom changes to complete before performing next command.
Requires VisuMZ_3_ActSeqCamera!

---

Dragonbones Union VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Battler Plugin Commands

---

DragonBonesUnionPluginCommand01.png

Battler: Actor Change Settings
- Change target actor's Dragonbones armature settings for battle.

  Actor ID:
  - Select which Actor ID to affect.

    Filename:
    - Change the armature's filename.

    Offset X:
    - Change the armature's Offset X value.

    Offset Y:
    - Change the armature's Offset Y value.

    Scale X:
    - Change the armature's Scale X value.

    Scale Y:
    - Change the armature's Scale Y value.

    Time Scale:
    - Change the armature's Time Scale value.

    Width:
    - Change the battler width size.

    Height:
    - Change the battler height size.

  Motion Settings:

    Walk:
    Wait:
    Chant:
    Guard:
    Damage:
    Evade:
    Thrust:
    Swing:
    Missile:
    Skill:
    Spell:
    Item:
    Escape:
    Victory:
    Dying:
    Abnormal:
    Sleep:
    Dead:
    - Change the animation used for this motion.

---

Map Sprite Plugin Commands

---

DragonbonesMapPlayer.gif

DragonBonesUnionPluginCommand02.png

Map Sprite: Actor Change Settings
- Change target actor's Dragonbones armature settings for map sprites.

  Actor ID:
  - Select which Actor ID to affect.

    Filename:
    - Change the armature's filename.

    Offset X:
    - Change the armature's Offset X value.

    Offset Y:
    - Change the armature's Offset Y value.

    Scale X:
    - Change the armature's Scale X value.

    Scale Y:
    - Change the armature's Scale Y value.

    Time Scale:
    - Change the armature's Time Scale value.

      Walk Rate:
      - Change the armature's walk animation rate.

      Dash Rate:
      - Change the armature's dash animation rate.

    Width:
    - Change the battler width size.

    Height:
    - Change the battler height size.

  Flip Settings:

    Flip Left?:
    Flip Right:
    - Flip the scale x value when facing left/right-ward directions?

  Motion Settings:

    Idle:
    Walk:
    Dash:
    Jump:
    Ladder (Idle):
    Ladder (Climb):
    Rope (Idle):
    Rope (Climb):
    - Base rope climbing animation name used.

---

DragonBonesAnimate.gif

DragonBonesUnionPluginCommand03.png

Map Sprite: Actor Play Animation
- Target actor plays a custom Dragonbones animation.

  Actor ID:
  - Select which Actor ID to affect.

  Play Animation:
  - Play this animation.

NOTE: An alternative to this is to put the following code inside of a
      Movement Route's script call:

      this.dragonbonesAnimation = "AnimationName";

      Replace 'AnimationName' (keep the quotes) with the name of the
      Dragonbones animation.

---

DragonBonesUnionPluginCommand04.png

Map Sprite: Actor Stop Animation
- Stops a target actor's custom Dragonbones animation.

  Actor ID:
  - Select which Actor ID to affect.

---

DragonBonesAnimate.gif

DragonBonesUnionPluginCommand05.png

Map Sprite: Event Play Animation
- Target event plays a custom Dragonbones animation.

  Event ID:
  - Select which Event ID to affect.

  Play Animation:
  - Play this animation.

---

DragonBonesUnionPluginCommand06.png

Map Sprite: Event Stop Animation
- Stops a target event's custom Dragonbones animation.

  Event ID:
  - Select which Event ID to affect.

---

DragonBonesUnionPluginCommand07.png

Map Sprite: Follower Play Animation
- Target follower plays a custom Dragonbones animation.

  Follower Index:
  - Select which Follower Index to affect.

  Play Animation:
  - Play this animation.

---

DragonBonesUnionPluginCommand08.png

Map Sprite: Follower Stop Animation
- Stops a target follower's custom Dragonbones animation.

  Follower ID:
  - Select which Follower Index to affect.

---

DragonBonesUnionPluginCommand09.png

Map Sprite: Player Play Animation
- Player plays a custom Dragonbones animation.

  Play Animation:
  - Play this animation.

---

DragonBonesUnionPluginCommand10.png

Map Sprite: Player Stop Animation
- Stops player's custom Dragonbones animation.

---

Picture Plugin Commands

---

DragonBonesUnionPluginCommand11.png

Picture: Dragonbones Setup
- Setup a Dragonbones armature for a picture.

  Picture ID:
  - Select which Picture ID(s) to give a Dragonbones armature.

  Armature Filename:
  - What is the armature's filename?

  Play Animation:
  - Play this animation once it starts.

  Offset: X:
  - Default X offset value for this Dragonbones armature.

  Offset: Y:
  - Default Y offset value for this Dragonbones armature.

  Scale: X:
  - Default X scaling for this Dragonbones armature.
  - This will be amplified by the picture's scaling value.

  Scale: Y:
  - Default Y scaling for this Dragonbones armature.
  - This will be amplified by the picture's scaling value.

  Time Scale:
  - Default time scale for this Dragonbones armature.
  - Higher values play faster. Lower values play slower.

---

DragonBonesUnionPluginCommand12.png

Picture: Play Dragonbones Animation
- Make an existing Dragonbones armature attached to a picture play
  an animation.

  Picture ID:
  - Select which Picture ID to modify.

  Play Animation:
  - Play this animation.

  Finish: Revert Idle:
  - Revert animation to 'idle' animation after finishing?

---

DragonBonesUnionPluginCommand13.png

Picture: Offset Dragonbones
- Offset the X, Y attachment point of the Dragonbones armature.

  Picture ID:
  - Select which Picture ID to modify.

  Offset: X:
  - X offset value for this Dragonbones armature.

  Offset: Y:
  - Y offset value for this Dragonbones armature.

---

DragonBonesUnionPluginCommand14.png

Picture: Scale Dragonbones
- Change the scaling values of the Dragonbones armature.

  Picture ID:
  - Select which Picture ID to modify.

  Scale: X:
  - X scaling for this Dragonbones armature.
  - This will be amplified by the picture's scaling value.

  Scale: Y:
  - Y scaling for this Dragonbones armature.
  - This will be amplified by the picture's scaling value.

---

DragonBonesUnionPluginCommand15.png

Picture: Time Scale Dragonbones
- Change the speed at which Dragonbones animations play.

  Picture ID:
  - Select which Picture ID to modify.

  Time Scale:
  - Time scale for this Dragonbones armature.
  - Higher values play faster. Lower values play slower.

---

Elements and Status Menu Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

---

ElementStatusMenuCoreBios.png

ElementsStatusMenuCorePluginCommand01.png

Actor: Change Biography (Group)
Actor: Change Biography (Range)
Actor: Change Biography (JS)
- Changes the biography of the selected actor(s).
- Each version has a different means of selecting Actor ID's.

  Step 1: Target ID
  - Select which Actor ID(s) to affect.

  Step 2: Biography
  - Change the biography for target actor(s) to this.
  - Text codes allowed.
  - %1 - Actor's name.

---

ElementStatusMenuCoreTraitSets.png

ElementsStatusMenuCorePluginCommand04.png

Actor: Change Trait Sets (Group)
Actor: Change Trait Sets (Range)
Actor: Change Trait Sets (JS)
- Changes the Trait Set(s) of the selected actor(s).
- Each version has a different means of selecting Actor ID's.

  Step 1: Target ID
  - Select which Actor ID(s) to affect.

  Step 2: Change Trait Set
  - Element
  - SubElement
  - Gender
  - Race
  - Nature
  - Alignment
  - Blessing
  - Curse
  - Zodiac
  - Variant
    - Change to the name of the Trait Set to switch actor(s) to.
    - "Unchanged" to leave alone.
    - "Random" to randomize.
      - Random will use the random pool dictated by the Plugin Parameters
        and the Trait Set weights determined there as well.

---

Enemy Plugin Commands

---

ElementsStatusMenuCoreVariants.png

ElementsStatusMenuCorePluginCommand07.png

Enemy: Change Trait Sets (Group)
Enemy: Change Trait Sets (Range)
Enemy: Change Trait Sets (JS)
- Changes the Trait Set(s) of the selected enemy(ies).
- Each version has a different means of selecting Enemy Indexes.

  Step 1: Target ID
  - Select which Enemy Index(es) to affect.

  Step 2: Change Trait Set
  - Element
  - SubElement
  - Gender
  - Race
  - Nature
  - Alignment
  - Blessing
  - Curse
  - Zodiac
  - Variant
    - Change to the name of the Trait Set to switch target(s) to.
    - "Unchanged" to leave alone.
    - "Random" to randomize.
      - Random will use the random pool dictated by the Plugin Parameters
        and the Trait Set weights determined there as well.

---

Events and Movement Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Auto Movement Plugin Commands

---

ZaWarudo.gif

EventsMoveCore PluginCommand 1.png

Auto Movement: Events
- Allow/stop events from auto movement.

  Value:
  - Allow events to move automatically?

---

Call Event Plugin Commands

---

EventsMoveCore PluginCommand 2.png

Call Event: Remote Activation
- Runs the page of a different event remotely.

  Map ID:
  - Target event's map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the event to remotely run.
  - Use 0 for current event.
  - You may use JavaScript code.

  Page ID:
  - The page of the remote event to run.
  - You may use JavaScript code.

---

Dash Plugin Commands

---

EventsMoveCore PluginCommand 3.png

Dash Enable: Toggle
- Enable/Disable Dashing on maps.

  Value:
  - What do you wish to change dashing to?

---

Event Icon Plugin Commands

---

EventsMoveCoreIcon.png

EventsMoveCore PluginCommand 4.png

Event Icon: Change
- Change the icon that appears on an event.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Icon Index:
  - Icon index used for the icon.
  - You may use JavaScript code.

  Buffer X:
  - How much to shift the X position by?
  - You may use JavaScript code.

  Buffer Y:
  - How much to shift the Y position by?
  - You may use JavaScript code.

  Blend Mode:
  - What kind of blend mode do you wish to apply to the icon sprite?

---

EventsMoveCore PluginCommand 5.png

Event Icon: Delete
- Delete the icon that appears on an event.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

---

Event Label Plugin Commands

---

EventsMoveCoreLabel.png

EventsMoveCore PluginCommand 6.png

Event Label: Refresh
- Refresh all Event Labels on screen.
- This is used to refresh page conditions for map changes that don't
  force a refresh.

---

EventsMoveCore PluginCommand 7.png

Event Label: Visible
- Change the visibility of Event Labels.

  Visibility:
  - What do you wish to change visibility to?

---

Event Location Plugin Commands

---

EventsMoveCore PluginCommand 8.png

Event Location: Save
- Memorize an event's map location so it reappears there the next time the
  map is loaded.

  Event ID:
  - The ID of the target event.
  - You may use JavaScript code.

---

EventsMoveCore PluginCommand 9.png

Event Location: Delete
- Deletes an event's saved map location.
- The event will reappear at its default location.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

---

EventsMoveCore PluginCommand 10.png

Event Location: Create
- Creates a custom spawn location for a specific map's event so it appears
  there the next time the map is loaded.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  X Coordinate:
  - The X coordinate of the event.
  - You may use JavaScript code.

  Y Coordinate:
  - The Y coordinate of the event.
  - You may use JavaScript code.

  Direction:
  - The direction the event will be facing.

  Optional:

    Page ID:
    - The page of the event to set the move route to.
    - You may use JavaScript code.

    Move Route Index:
    - The point in the move route for this event to be at if the page ID
      matches the rest of the page conditions.

---

Event Timer Plugin Commands

---

EventsMoveCore Update25 Command1.png

Event Timer: Change Speed
- Changes the timer frame decrease (or increase) speed.

  Speed:
  - How many 1/60ths of a second does each frame increase or decrease by?
  - Negative decreases.
  - Positive increases.
  - JavaScript allowed.

---

EventsMoveCore Update25 Command2.png

Event Timer: Expire Event Assign
- Sets a Common Event to run upon expiration.
- Bypasses the default code if one is set.

  Common Event ID:
  - Select the Common Event to run upon the timer's expiration.

---

EventsMoveCore Update25 Command3.png

Event Timer: Expire Event Clear
- Clears any set to expire Common Event and instead, run the default
  Game_Timer expiration code.

---

EventsMoveCore Update25 Command4.png

Event Timer: Frames Gain
- Chooses how many frames, seconds, minutes, or hours are gained or lost for
  the event timer.

  Frames:
  - How many 1/60ths of a second are gained/lost?
  - Positive for gain.
  - Negative for lost.
  - JavaScript allowed.

  Seconds:
  - How many seconds are gained/lost?
  - Positive for gain.
  - Negative for lost.
  - JavaScript allowed.

  Minutes:
  - How many minutes are gained/lost?
  - Positive for gain.
  - Negative for lost.
  - JavaScript allowed.

  Hours:
  - How many hours are gained/lost?
  - Positive for gain.
  - Negative for lost.
  - JavaScript allowed.

---

EventsMoveCore Update25 Command5.png

Event Timer: Frames Set
- Chooses how many frames, seconds, minutes, or hours are set for the event
  timer.

  Frames:
  - Set frame count to this value.
  - Each frame is 1/60th of a second.
  - JavaScript allowed.

  Seconds:
  - Set seconds to this value.
  - JavaScript allowed.

  Minutes:
  - Set minutes to this value.
  - Each minute is 60 seconds.
  - JavaScript allowed.

  Hours:
  - Set hours to this value.
  - Each hour is 60 minutes.
  - JavaScript allowed.

---

EventsMoveCore Update25 Command6.png

Event Timer: Pause
- Pauses the current event timer, but does not stop it.

---

EventsMoveCore Update25 Command7.png

Event Timer: Resume
- Resumes the current event timer from the paused state.

---

Follower Control Plugin Commands

---

EventsMoveCore Update18 Command1.png

Follower: Set Global Chase
- Disables all followers from chasing the player or reenables it.

  Chase:
  - Sets all followers to chase the player or not.

---

EventsMoveCore Update18 Command2.png

Follower: Set Target Chase
- Disables target follower from chasing the player or reenables it.

  Follower ID:
  - Select which follower ID to disable/reenable chasing for.

  Chase:
  - Sets target follower to chase its target or not.

---

EventsMoveCore Update18 Command3.png

Follower: Set Control
- Sets the event commands to target a follower when "Player" is selected as
  the target.

  Follower ID:
  - Select which follower ID to control.
  - 0 is the player.

---

EventsMoveCore Update18 Command4.png

Follower: Reset
- Resets all follower controls. Event Commands that target the "Player"
  return to normal and followers chase again.

---

Global Switch Plugin Commands

---

EventsMoveCoreCommandGlobal1.png

Global Switch: Get Self Switch A B C D
- Gets the current ON/OFF value from a Self Switch and stores it onto a
  Global Switch.

  Map ID:
  - The map the source map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the source event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Letter:
  - Letter of the target event's Self Switch to obtain data from.

  -

  Target Switch ID:
  - The ID of the target switch.

---

EventsMoveCoreCommandGlobal2.png

Global Switch: Get Self Switch ID
- Gets the current ON/OFF value from a Self Switch and stores it onto a
  Global Switch.

  Map ID:
  - The map the source map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the source event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Switch ID:
  - The ID of the source switch.

  -

  Target Switch ID:
  - The ID of the target switch.

---

Global Variable Plugin Commands

---

EventsMoveCoreCommandGlobal3.png

Global Variable: Get Self Variable ID
- Gets the current stored value from a Self Variable and stores it onto a
  Global Variable.

  Map ID:
  - The map the source map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the source event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Variable ID:
  - The ID of the source variable.

  -

  Target Variable ID:
  - The ID of the target variable.

---

Morph Event Plugin Commands

---

EventsMoveCore PluginCommand 11.png

Morph Event: Change
- Runs the page of a different event remotely.

  Step 1:

    Map ID:
    - Target event's map. Use 0 for current map.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event.
    - Use 0 for current event.
    - You may use JavaScript code.

  Step 2:

    Template Name:
    - Name of the target event template to morph into.
    - Ignored if this is called "Untitled".

    Map ID:
    - Target event's map. Use 0 for current map.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event.
    - Use 0 for current event.
    - You may use JavaScript code.

    Preserve Morph:
    - Is the morph effect preserved?
    - Or does it expire upon leaving the map?

---

EventsMoveCore PluginCommand 12.png

Morph Event: Remove
- Remove the morph status of an event.

  Map ID:
  - Target event's map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the event to remotely run.
  - Use 0 for current event.
  - You may use JavaScript code.

  Remove Preservation:
  - Also remove the preservation effect?

---

Player Icon Plugin Commands

---

EventsMoveCoreIcon.png

EventsMoveCore PluginCommand 13.png

Player Icon: Change
- Change the icon that appears on on the player.

  Icon Index:
  - Icon index used for the icon.
  - You may use JavaScript code.

  Buffer X:
  - How much to shift the X position by?
  - You may use JavaScript code.

  Buffer Y:
  - How much to shift the Y position by?
  - You may use JavaScript code.

  Blend Mode:
  - What kind of blend mode do you wish to apply to the icon sprite?

---

EventsMoveCore PluginCommand 14.png

Player Icon: Delete
- Delete the icon that appears on the player.

---

Self Data Plugin Commands

---

EventsMoveCore Update97 Command1.png

Self Data: Reset All
- Reset the Self Switch and Self Variable data of all events within the
  specified map.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

---

Self Switch Plugin Commands

---

EventsMoveCore PluginCommand 15.png

Self Switch: A B C D
- Change the Self Switch of a different event.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Letter:
  - Letter of the target event's Self Switch to change.

  Value:
  - What value do you want to set the Self Switch to?

---

EventsMoveCoreSelfSwitchesVariables.png

EventsMoveCore PluginCommand 16.png

Self Switch: Switch ID
- Change the Self Switch of a different event.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Switch ID:
  - The ID of the target switch.

  Value:
  - What value do you want to set the Self Switch to?

---

Self Variable Plugin Commands

---

EventsMoveCoreSelfSwitchesVariables.png

EventsMoveCore PluginCommand 17.png

Self Variable: Variable ID
- Change the Self Variable of a different event.

  Map ID:
  - The map the target map. Use 0 for current map.
  - You may use JavaScript code.

  Event ID:
  - The ID of the target event.
  - Use 0 for current event.
  - You may use JavaScript code.

  Variable ID:
  - The ID of the target variable.

  Value:
  - What value do you want to set the Self Switch to?

---

Spawn Event Plugin Commands

---

EventsMoveCore PluginCommand 18.png

Spawn Event: Spawn At X, Y
- Spawns desired event at X, Y location on the current map.

  Step 1:

    Template Name:
    - Name of the target event template to spawn as.
    - Ignored if this is called "Untitled".

    Map ID:
    - Target event's map to be used as reference.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event to be used as reference.
    - You may use JavaScript code.

  Step 2:

    X Coordinate:
    - Target Location to spawn at.
    - You may use JavaScript code.

    Y Coordinate:
    - Target Location to spawn at.
    - You may use JavaScript code.

    Check Event Collision:
    - Check collision with any other events and player?

    Check Passability:
    - Check passability of the target location.

    Preserve Spawn:
    - Is the spawned event preserved?
    - Or does it expire upon leaving the map?

  Step 3:

    Success Switch ID:
    - Target switch ID to record spawning success.
    - Ignore if ID is 0. OFF means failed. ON means success.

---

EventsMoveCore PluginCommand 19.png

Spawn Event: Spawn At Region
- Spawns desired event at a random region-marked location on the
  current map.

  Step 1:

    Template Name:
    - Name of the target event template to spawn as.
    - Ignored if this is called "Untitled".

    Map ID:
    - Target event's map to be used as reference.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event to be used as reference.
    - You may use JavaScript code.

  Step 2:

    Region ID(s):
    - Pick region(s) to spawn this event at.

    Check Event Collision:
    - Check collision with any other events and player?

    Check Passability:
    - Check passability of the target location.

    Preserve Spawn:
    - Is the spawned event preserved?
    - Or does it expire upon leaving the map?

  Step 3:

    Success Switch ID:
    - Target switch ID to record spawning success.
    - Ignore if ID is 0. OFF means failed. ON means success.

---

EventsMoveCore Update20 Command1.png

Spawn Event: Spawn At Terrain Tag
- Spawns desired event at a random terrain tag-marked location on the
  current map.

  Step 1:

    Template Name:
    - Name of the target event template to spawn as.
    - Ignored if this is called "Untitled".

    Map ID:
    - Target event's map to be used as reference.
    - You may use JavaScript code.

    Event ID:
    - The ID of the target event to be used as reference.
    - You may use JavaScript code.

  Step 2:

    Terrain Tag(s):
    - Pick terrain tag(s) to spawn this event at.
    - Insert numbers between 0 and 7.

    Check Event Collision:
    - Check collision with any other events and player?

    Check Passability:
    - Check passability of the target location.

    Preserve Spawn:
    - Is the spawned event preserved?
    - Or does it expire upon leaving the map?

  Step 3:

    Success Switch ID:
    - Target switch ID to record spawning success.
    - Ignore if ID is 0. OFF means failed. ON means success.

---

EventsMoveCore PluginCommand 20.png

Spawn Event: Despawn Event ID
- Despawns the selected Event ID on the current map.

  Event ID
  - The ID of the target event.
  - You may use JavaScript code.

---

EventsMoveCore PluginCommand 21.png

Spawn Event: Despawn At X, Y
- Despawns any spawned event(s) at X, Y location on the current map.

  X Coordinate:
  - Target Location to despawn at.
  - You may use JavaScript code.

  Y Coordinate:
  - Target Location to despawn at.
  - You may use JavaScript code.

---

EventsMoveCore PluginCommand 22.png

Spawn Event: Despawn Region(s)
- Despawns the selected Region(s).

  Region ID(s)
  - Pick region(s) and despawn everything inside it.

---

EventsMoveCore Update20 Command2.png

Spawn Event: Despawn Terrain Tag(s)
- Despawns the selected Terrain Tags(s) on the current map.

  Terrain Tag(s):
  - Pick terrain tag(s) and despawn everything inside it.
  - Insert numbers between 0 and 7.

---

EventsMoveCore PluginCommand 23.png

Spawn Event: Despawn Everything
- Despawns all spawned events on the current map.

---

Items and Equips Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

--

ItemsEquipsCoreEquipTypes.png

ItemsEquipsCoreUpdate16 Command1.png

Actor: Change Equip Slots
- Forcefully change the actor(s) equip slots.
- These will persist through class changes.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

  Equip Slots:
  - Insert the equip slots you want the actor(s) to have.
  - These entries are case-sensitive.

--

ItemsEquipsCoreEquipTypes.png

ItemsEquipsCoreUpdate16 Command2.png

Actor: Reset Equip Slots
- Reset any forced equip slots for the actor(s).
- Equip slots will then be based on class.

  Actor ID(s):
  - Select which Actor ID(s) to affect.

---

Shop Plugin Commands

---

ItemsEquipsCoreShopEquip.png

ItemsEquipsCorePluginCommand1.png

Shop: Advanced
- Make it easier to put together inventories for a shop.
- WARNING: Does not allow for event-specific prices.

  Step 1: Item ID's
  - Select which Item ID ranges to add.

  Step 2: Weapon ID's
  - Select which Weapon ID ranges to add.

  Step 3: Armor ID's
  - Select which Armor ID ranges to add.

  Step 4: Purchase Only?
  - Make the shop purchase-only?

  Optional:

    Blacklist
    - A list of categories to blacklist from the shop.
    - Not used if empty. Mark categories with <Category: x>

    Whitelist
    - A list of categories to whitelist for the shop.
    - Not used if empty. Mark categories with <Category: x>

This Plugin Command primarily functions as an alternative to the editor's
"Shop Processing" event command as that one requires you to add items one at
a time, making it extremely tedious to add large amounts of items. This
Plugin Command will mitigate that by allowing ID ranges to determine which
items to make available.

---

Main Menu Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

---

MainMenuCorePluginCommand.png

Actor: Change Menu Image (Group)
Actor: Change Menu Image (Range)
Actor: Change Menu Image (JS)
- Changes the actor's Menu Image.
- Each version has a different means of selecting Actor ID's.

  Actor ID:
  - Select which ID(s) to affect.

  Filename:
  - Selected actor(s) will have their menu images changed to this.

---

Menu Command Plugin Commands

---

Menu Command: Clear Forced Settings
- Clear any forced settings for the menu command symbols.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Menu Command: Force Disable
- Forcefully disable specific menu commands via their symbols.
- Matching forced enabled symbols will be overwritten.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Menu Command: Force Enable
- Forcefully enable specific menu commands via their symbols.
- Matching forced disabled symbols will be overwritten.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Menu Command: Force Hide
- Forcefully hide specific menu commands via their symbols.
- Matching forced shown symbols will be overwritten.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Menu Command: Force Show
- Forcefully show specific menu commands via their symbols.
- Matching forced hidden symbols will be overwritten.

  Symbol(s):
  - Insert the symbols of the menu commands here.
  - The symbols are case sensitive.
  - VisuStella is NOT responsible for any errors produced by menus that
    become accessible outside of their intended usage.

---

Message Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Message Plugin Commands

---

MessageCoreLargerMessageBox.png

MessageCore Update30 Command1.png

Message: Properties
  Change the various properties of the Message Window.

  Rows:
  - Change the number of Message Window rows.
  - Leave at 0 to keep it unchanged.

  Width:
  - Change the Message Window width in pixels.
  - Leave at 0 to keep it unchanged.

  Word Wrap:
  - Enable or disable Word Wrap for the Message Window?

---

MessageCore Update30 Command2.png

Message: X/Y Offsets
- Change the X and Y Offsets of the Message Window.
- The offset value(s) will be saved and stored.

  Offset X:
  - Offset Message Window horizontally.
  - Negative: Left; Positive: Right
  - Message Window coordinates are still restricted via clamping.

  Offset Y:
  - Offset Message Window vertically.
  - Negative: Up; Positive: Down
  - Message Window coordinates are still restricted via clamping.

---

Choice Plugin Commands

---

MessageCoreExpandedChoices.png

MessageCorePluginCommand2.png

Choice: Properties
  Change the properties found in the Show Choices event command.

  Line Height:
  - Change the line height for the show choices.
  - Leave at 0 to keep this unchanged.

  Max Rows:
  - Maximum number of choice rows to be displayed.
  - Leave at 0 to keep this unchanged.

  Max Columns:
  - Maximum number of choice columns to be displayed.
  - Leave at 0 to keep this unchanged.

  Text Alignment:
  - Text alignment for Show Choice window.

---

Picture Plugin Commands

---

MessageCore PictureText.png

MessageCore Update33 Command1.png

Picture: Change Text
- Change text for target picture(s) to show.
- You may use text codes.
- Text will adapt to picture's properties.
- Settings will be erased if picture is erased.

  Picture ID(s):
  - The ID(s) of the picture(s) to set text to.

  Padding:
  - How much padding from the sides should there be?

  Text:

    Upper Left:
    Upper Center:
    Upper Right:
    Middle Left:
    Middle Center:
    Middle Right:
    Lower Left:
    Lower Center:
    Lower Right:
    - The text that's aligned to this picture's side.
    - You may use text codes.

---

MessageCore Update33 Command2.png

Picture: Erase Text
- Erase all text for target picture(s).

  Picture ID(s):
  - The ID(s) of the picture(s) to erase text for.

---

MessageCore Update95 Command1.png

Picture: Refresh Text
- Refreshes the text used for all on-screen pictures.
- To be used if any dynamic text codes are updated like \n[x].

---

Save Core VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Autosave Plugin Commands

---

SaveCoreAutoSave.png

SaveCorePluginCommands01.png

Autosave: Enable/Disable
- Enable or Disable Autosave
- Requires Database => System 1 => [x] Enable Autosave

  Enable or Disable?:
  - Enable or disable autosave?

---

SaveCorePluginCommands02.png

Autosave: (Stage 1) Request
- Autosaves the game at current point if enabled.
- Requires Database => System 1 => [x] Enable Autosave
- Autosave does not go through if it is neither enabled in the database or
  in-game through the "Autosave: Enable/Disable" plugin command.
- This Plugin Command will not autosave if the player turned off "Autosave"
  in the Options Menu.

---

SaveCorePluginCommands03.png

Autosave: (Stage 2) Execute
- Executes autosaves the game at the current point.
- Requires Database => System 1 => [x] Enable Autosave
- This will require autosave to be enabled through the database, but it will
  ignore the "Autosave: Enable/Disable" plugin command state.
- This Plugin Command will not autosave if the player turned off "Autosave"
  in the Options Menu.

---

SaveCorePluginCommands04.png

Autosave: (Stage 3) Force
- Forces autosaves the game at the current point.
- Requires Database => System 1 => [x] Enable Autosave
- This will require autosave to be enabled through the database, but it will
  ignore the "Autosave: Enable/Disable" plugin command state.

---

Save Plugin Commands

---

SaveCorePluginCommands05.png

Save: Current Slot
- Process the game's current save at the current point.
- Must be outside of battle and on the map.

---

SaveCorePicturesDesc.png

SaveCorePluginCommands06.png

Save: Set Description
- Set the description text that will appear in the save files.

  Text:
  - Insert desired save description text here.
  - Text codes supported.
  - \V[x], \N[x], \P[x] are save local.
  - Other text codes will draw data from the currently active game.

---

SaveCorePluginCommands07.png

Save: Set Picture
- Set the picture that would appear in the save file.

  Filename:
  - Input the filename here of the desired picture.

---

Victory Aftermath VisuStella MZ

The following are Plugin Commands that come with this plugin. They can be accessed through the Plugin Command event command.

---

Actor Plugin Commands

---

VictoryAftermathLevelUpNew.png

VictoryAftermathPluginCommand1.png

Actor: Add Level Up Quotes
- Add new entries target actor's level up quotes.

  Actor ID:
  - Select ID of target actor to add quotes for.

  New Quotes:
  - Add new entries to actor's level up quotes.
  - Text codes allowed. %1 - Actor's Name

---

VictoryAftermathSkillLearnNew.png

VictoryAftermathPluginCommand2.png

Actor: Add New Skill Quotes
- Add new entries target actor's new skill quotes.

  Actor ID:
  - Select ID of target actor to add quotes for.

  New Quotes:
  - Add new entries to actor's new skill quotes.
  - Text codes allowed. %1 - Actor's Name

---

VictoryAftermathPluginCommand3.png

Actor: Clear Level Up Quotes
- Clear target actor's level up quotes.

  Actor ID:
  - Select ID of target actor to clear quotes for.

---

VictoryAftermathPluginCommand4.png

Actor: Clear New Skill Quotes
- Clear target actor's new skill quotes.

  Actor ID:
  - Select ID of target actor to clear quotes for.

---

System Plugin Commands

---

VictoryAftermathScreenshotNew.png

VictoryAftermathPluginCommand5.png

System: Bypass Victory Motion
- Bypass actors performing their victory motion?

  Bypass?:
  - Bypass actors performing their victory motion?

---

VictoryAftermathPluginCommand6.png

System: Bypass Victory Music
- Bypass playing the victory music?

  Bypass?:
  - Bypass playing the victory music?

---

VictoryAftermathPluginCommand7.png

System: Bypass Victory Phase
- Bypass the entire victory phase and all aspects about it?

  Bypass?:
  - Bypass the entire victory phase and all aspects about it?

---

End of List

Pages in category "Plugin Commands (MZ)"

The following 71 pages are in this category, out of 71 total.